1、BSI Standards PublicationBS EN ISO 5395-3:2013Garden equipment Safetyrequirements for combustion-engine-powered lawnmowersPart 3: Ride-on lawnmowers with seatedoperator (ISO 5395-3:2013)Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproducti
2、on or networking permitted without license from IHS-,-,-BS EN ISO 5395-3:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 5395-3:2013. Together with BS EN ISO 5395-1:2013 and BS EN ISO 5395-2:2013 it supersedes BS EN 836:1997+A4:2011, which iswithdrawn.T
3、he UK participation in its preparation was entrusted to Technical Committee AGE/20, Powered lawn and garden equipment.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contr
4、act. Users are responsible for its correct application. The British Standards Institution 2013. Published by BSI Standards Limited 2013ISBN 978 0 580 70160 3 ICS 65.060.70Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the au
5、thority of the Standards Policy and Strategy Committee on 30 September 2013.Amendments/corrigenda issued since publicationDate Text affectedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license fro
6、m IHS-,-,-EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 5395-3 September 2013 ICS 65.060.70 Supersedes EN 836:1997+A4:2011English Version Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013) Mat
7、riel de jardinage - Exigences de scurit pour les tondeuses gazon moteur combustion interne - Partie 3: Tondeuses gazon conducteur assis (ISO 5395-3:2013) Gartengerte - Sicherheitsanforderungen fr verbrennungsmotorisch angetriebene Rasenmher - Teil 3: Rasenmher mit Fahrersitz mit sitzendem Benutzer (
8、ISO 5395-3:2013) This European Standard was approved by CEN on 19 July 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibli
9、ographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the respons
10、ibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Repub
11、lic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMAL
12、ISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 5395-3:2013: ECopyright European Committee for Standardization Provide
13、d by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 5395-3:2013EN ISO 5395-3:2013 (E) 3 Foreword This document (EN ISO 5395-3:2013) has been prepared by Technical Committee ISO/TC 23 “Tractors and machinery for agriculture and f
14、orestry“ in collaboration with Technical Committee CEN/TC 144 “Tractors and machinery for agriculture and forestry” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the
15、 latest by March 2014, and conflicting national standards shall be withdrawn at the latest by September 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or
16、all such patent rights. This document supersedes EN 836:1997+A4:2011. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive. For relationship with EU Directive, see informat
17、ive Annex ZA, which is an integral part of this document. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, F
18、inland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text o
19、f ISO 5395-3:2013 has been approved by CEN as EN ISO 5395-3:2013 without any modification. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 5395-3:2013EN ISO 5395-3:2013
20、 (E) 4 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 97/23/EC (PED) This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a means of confo
21、rming to Essential Requirements of the New Approach Directive 2006/42/EC amended by 2009/127/EC. Once this standard is cited in the Official Journal of the European Union under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative
22、clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the product(s) falling wi
23、thin the scope of this standard. NOTE Compliance with Part 3, together with Part 1, is necessary to achieve presumption of conformity with the Essential Requirements of Directive 2006/42/EC and associated EFTA regulations. Copyright European Committee for Standardization Provided by IHS under licens
24、e with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 5395-3:2013ISO 5395-3:2013(E) ISO 2013 All rights reserved iiiContents PageForeword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 24 Requirements for ride-on lawnmowe
25、rs . 24.1 General . 24.2 Controls . 24.3 Operator presence control (OPC) . 64.4 Brakes . 64.5 Guards . 94.6 Stability . 114.7 Rollover protective structure (ROPS) . 124.8 Seat belts . 124.9 Seats and foot rests 134.10 Transport position of the cutting-means assembly .144.11 Separate fan for grass co
26、llection . 144.12 Hot surfaces 154.13 Exhaust fumes 154.14 Pressurized components of hydraulic systems 154.15 Liquid spillage 154.16 Electrical system . 164.17 Electromagnetic immunity 164.18 Noise . 174.19 Vibration 175 Particular requirements for ride-on rotary lawnmowers185.1 Cutting means . 185.
27、2 Impact of the cutting means . 195.3 Cutting-means enclosure 195.4 Structural integrity . 235.5 Thrown objects 235.6 Grass catchers . 246 Particular requirements for ride-on cylinder lawnmowers 246.1 Cutting-means enclosure 246.2 Throw line 276.3 Stopping time of the cutting means . 277 Information
28、 for use .277.1 Instruction handbook 277.2 Markings and warnings 30Annex A (normative) Ride-on lawnmower stability test 33Annex B (normative) Determination of contact with moving power-driven components 36Annex C (informative) List of significant hazards 40Bibliography .42Copyright European Committe
29、e for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 5395-3:2013ISO 5395-3:2013(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodie
30、s (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations,
31、 governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/
32、IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the mem
33、ber bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.ISO 5395-3 was prepared by the European Committee for Standarization (CEN) T
34、echnical Committee CEN/TC 144, Tractors and machinery for agriculture and forestry in collaboration with ISO Technical Committee TC 23, Tractors and machinery for agriculture and forestry, Subcommittee SC 13, Powered lawn and garden equipment, in accordance with the Agreement on technical cooperatio
35、n between ISO and CEN (Vienna Agreement).This second edition of ISO 5395-3, together with ISO 5395-1 and ISO 5395-2, cancels and replaces ISO 5395:1990, which has been technically revised. These three parts also incorporate the Amendment ISO 5395:1990/Amd.1:1992.ISO 5395 consists of the following pa
36、rts, under the general title Garden equipment Safety requirements for combustion-engine-powered lawnmowers: Part 1: Terminology and common tests Part 2: Pedestrian-controlled lawnmowers Part 3: Ride-on lawnmowers with seated operatoriv ISO 2013 All rights reservedCopyright European Committee for Sta
37、ndardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 5395-3:2013ISO 5395-3:2013(E)IntroductionThis document is a type-C standard as stated in ISO 12100.The machinery concerned and the extent to which hazards,
38、hazardous situations or hazardous events are covered are indicated in the scope of this document.When requirements of this type-C standard are different from those which are stated in type-A or type-B standards, the requirements of this type-C standard take precedence over the requirements of the ot
39、her standards for machines that have been designed and built according to the requirements of this type-C standard. ISO 2013 All rights reserved vCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without licen
40、se from IHS-,-,-BS EN ISO 5395-3:2013Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 5395-3:2013Garden equipment Safety requirements for combustion-engine-powered lawnm
41、owers Part 3: Ride-on lawnmowers with seated operator1 Scope1.1 This part of ISO 5395 specifies safety requirements and their verification for combustion-engine-powered ride-on (seated) rotary lawnmowers and cylinder lawnmowers (hereafter named “lawnmower”), and equipped with: metallic cutting means
42、; and/or non-metallic cutting means with one or more cutting elements pivotally mounted on a generally circular drive unit, where these cutting elements rely on centrifugal force to achieve cutting, and have a kinetic energy for each single cutting element of 10 J or more.This part of ISO 5395 does
43、not apply to: robotic and remote-controlled lawnmowers, flail mowers, grassland mowers, sickle bar mowers, towed/semi-mounted grass-cutting machines, and scrub-clearing machines; cutting-means assembly when used in combination with an agricultural tractor; electrically powered and battery-powered la
44、wnmowers.1.2 This part of ISO 5395 deals with all significant hazards, hazardous situations or events (see Annex C) relevant to lawnmowers when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer.1.3 This part of ISO 5395 is not applicable to lawn
45、mowers which are manufactured before the date of publication of this document.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated r
46、eferences, the latest edition of the referenced document (including any amendments) applies.IEC 61032:1997, Protection of persons and equipment by enclosures Probes for verificationISO 3776-2:2013, Tractors and machinery for agriculture Seat belts Part 2: Anchorage strength requirementsISO 3776-3:20
47、09, Tractors and machinery for agriculture Seat belts Part 3: Requirements for assembliesISO 5353, Earth-moving machinery, and tractors and machinery for agriculture and forestry Seat index pointISO 5395-1:2013, Garden equipment Safety requirements for combustion-engine-powered lawnmowers Part 1: Te
48、rminology and common testsISO 12100:2010, Safety of machinery General principles for design Risk assessment and risk reductionISO 13849-1:2006, Safety of machinery Safety-related parts of control systems Part 1: General principles for designINTERNATIONAL STANDARD ISO 5395-3:2013(E) ISO 2013 All rights reserved 1Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 5395-3:2013ISO 5395-3:2013(E)ISO 13
