1、BRITISH STANDARD BS EN ISO 5436-1:2001 Geometrical Product Specifications (GPS) Surface texture: Profile method; Measurement standards Part 1: Material measures The European Standard EN ISO 5436-1:2000 has the status of a British Standard ICS 17.040.20 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PER
2、MITTED BY COPYRIGHT LAWBS EN ISO 5436-1:2001 This British Standard, having been prepared under the direction of the Consumer Products and Services Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 23 August 2001 BSI 23 August 20
3、01 ISBN 0 580 38404 7 National foreword This British Standard is the official English language version of EN ISO 5436-1:2000. It is identical with ISO 5436-1:2000. The UK participation in its preparation was entrusted by Technical Committee TDW/4, Engineering drawing, metrology, precision measuremen
4、t and all related documentation, to Subcommittee TDW/4/-/3, The properties and metrology of surfaces, which has the responsibility to: A list of organizations represented on this Subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement internat
5、ional or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include
6、 all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European
7、 committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, th
8、e EN ISO foreword page, the ISO title page, pages ii to v, a blank page, pages 1 to 14, the annex ZA page, and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsENISO54361:2000 Refere
9、nce number ISO 5436-1:2000(E) OSI 0002 INTERNATIONAL STANDARD ISO 5436-1 First edition 2000-03-15 Geometrical Product Specifications (GPS) Surface texture: Profile method; Measurement standards Part 1: Material measures Spcification gomtrique des produits (GPS) tat de surface: Mthode du profil; talo
10、ns Partie 1: Mesures matrialises ENISO54361:2000 ii ENISO54361:2000 ISO -63451:(0002)E ISO 0002 All irhgts seredevr iii Contents Page 1 Scope 1 2 Normative references 1 3 Terms and definitions .1 4 Design requirements .2 4.1 Material .2 4.2 Size of measurement standard.2 5 Types, purposes and metrol
11、ogical characteristics of measurement standards 2 5.1 General2 5.2 Type A Depth measurement standard 2 5.3 Type B Tip condition measurement standard3 5.4 Type C Spacing measurement standard 3 5.5 Type D Roughness measurement standard.3 5.6 Type E Profile coordinate measurement standard4 6 Measuremen
12、t standard requirements .4 6.1 Type A Depth measurement standard 4 6.2 Type B Tip condition measurement standard5 6.3 Type C Spacing measurement standard 6 6.4 Type D Roughness measurement standard.7 6.5 Type E Profile coordinate measurement standard8 7 Definition of the measurands for the measureme
13、nt standards 9 7.1 Type A1 .9 7.2 Type A2 .10 7.3 Type B2 .10 7.4 Type B3 .10 7.5 Types C1 to C4, and D.11 7.6 Type E1 .11 7.7 Type E2 .11 8 Measurement standard certificate .12 Annex A (informative) Relation to the GPS matrix model.13 Bibliography14 ENISO54361:2000 ISO -63451:(0002)E iv ISO 0002 Al
14、l irhgts seredevr Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a sub
15、ject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (I
16、EC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an Intern
17、ational Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this part of ISO 5436 may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Inte
18、rnational Standard ISO 5436-1 was prepared by Technical Committee ISO/TC 213, Dimensional and geometrical product specifications and verification. This first edition of ISO 5436-1, together with ISO 5436-2, cancels and replaces (ISO 5436:1985), which has been technically revised. ISO 5436 consists o
19、f the following parts, under the general title Geometrical Product Specifications (GPS) Surface texture: Profile method; Measurement standards: Part 1: Material measures Part 2: Software measurement standards Annex A of this part of ISO 5436 is for information only. ENISO54361:2000 ISO -63451:(0002)
20、E ISO 0002 All irhgts seredevr v Introduction This part of ISO 5436 is a geometrical product specification (GPS) standard and is to be regarded as a general GPS standard (see ISO/TR 14638). It influences chain link 6 of the chain of standards on roughness, waviness and primary profile. For more deta
21、iled information of the relation of this part of ISO 5436 to the GPS matrix model, see annex A. This part of ISO 5436 introduces a new measurement standard, namely Type E, to calibrate the profile co-ordinate system. NOTE “Measurement standards“ were formerly referred to as “calibration specimens“. ENISO54361:2000 ENISO54361:2000
