1、BSI Standards PublicationBS EN ISO 10318-1:2015GeosyntheticsPart 1: Terms and definitionsBS EN ISO 10318-1:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO10318-1:2015. Together with BS EN ISO 10318-2:2015, it supersedesBS EN ISO 10318:2005 which is with
2、drawn.The UK participation in its preparation was entrusted to TechnicalCommittee B/553, Geotextiles and geomembranes.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contrac
3、t. Users are responsible for its correctapplication. The British Standards Institution 2015. Published by BSI StandardsLimited 2015ISBN 978 0 580 75353 4ICS 01.040.59; 59.080.70Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under t
4、he authority of theStandards Policy and Strategy Committee on 30 April 2015.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10318-1 April 2015 ICS 59.080.70; 01.040.59 Supersedes EN ISO 10318:2005English Version Geosynthetics - Part 1: Te
5、rms and definitions (ISO 10318-1:2015) Gosynthtiques - Partie 1: Termes et dfinitions (ISO 10318-1:2015) Geokunststoffe - Teil 1: Begriffe (ISO 10318-1:2015) This European Standard was approved by CEN on 24 January 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
6、 stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This Euro
7、pean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members ar
8、e the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Ro
9、mania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and
10、by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10318-1:2015 EBS EN ISO 10318-1:2015EN ISO 10318-1:2015 (E) 3 Foreword This document (EN ISO 10318-1:2015) has been prepared by Technical Committee ISO/TC 221 “Geosynthetics” in collaboration with Technical Committee CEN/TC 18
11、9 “Geosynthetics” the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2015, and conflicting national standards shall be withdrawn at the latest by Octo
12、ber 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 10318:2005. According to the CEN-CENELEC Int
13、ernal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland,
14、Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 10318-1:2015 has been approved by CEN as EN ISO 10318-1:2015 without any modificatio
15、n. BS EN ISO 10318-1:2015ISO 10318-1:2015(E/F)Contents PageForeword v1 Scope . 12 Terms and definitions . 12.1 Terms related to functions 12.2 Terms related to products . 22.3 Terms related to properties . 42.4 Other terms 7Bibliography 8 ISO 2015 All rights reserved/Tous droits rservs iiiBS EN ISO
16、10318-1:2015ISO 10318-1:2015(E/F)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body inter
17、ested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
18、 Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO docume
19、nts should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible
20、 for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for th
21、e convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Fo
22、reword - Supplementary informationThe committee responsible for this document is ISO/TC 221, Geosynthetics.This first edition of ISO 10318-1 cancels and replaces ISO 10318:2005, which has been technically revised.ISO 10318 consists of the following parts, under the general title Geosynthetics: Part
23、1: Terms and definitions Part 2: Symbols and pictogramsiv ISO 2015 All rights reserved/Tous droits rservsBS EN ISO 10318-1:2015INTERNATIONAL STANDARD ISO 10318-1:2015(E/F)Geosynthetics Part 1: Terms and definitions1 ScopeThe intent of this part of ISO 10318 is to define terms related to functions, p
24、roducts, properties, and other terms used in EN and ISO geosynthetics International Standards. Definitions of terms not included in this part of ISO 10318 can be found in the International Standards describing appropriate test methods.NOTE See also the ISO online browsing platform (OBP): www.iso.org
25、/obp/ui/2 Terms and definitions2.1 Terms related to functions2.1.1drainagecollecting and transporting of precipitation, ground water, and/or other fluids in the plane of a geosynthetic material2.1.2filtrationrestraining of uncontrolled passage of soil or other particles subjected to hydrodynamic for
26、ces, while allowing the passage of fluids into or across a geosynthetic material2.1.3protectionpreventing or limiting of local damage to a given element or material by the use of a geosynthetic material2.1.4reinforcementuse of the stress-strain behaviour of a geosynthetic material to improve the mec
27、hanical properties of soil or other construction materials2.1.5separationprevention from intermixing of adjacent dissimilar soils and/or fill materials by the use of a geosynthetic material2.1.6surface erosion controluse of a geosynthetic materials to prevent or limit soil or other particle movement
28、s at the surface of, for example, a slope2.1.7barrieruse of a geosynthetic to prevent or limit the migration of fluids ISO 2015 All rights reserved/Tous droits rservs 1BS EN ISO 10318-1:2015ISO 10318-1:2015(E/F)2.1.8stress relief use of a geosynthetic to retard the development of cracks by absorbing
29、 the stresses that arise from the damaged pavement2.2 Terms related to products2.2.1geosyntheticGSYgeneric term describing a product, at least one of whose components is made from a synthetic or natural polymer, in the form of a sheet, a strip, or a three-dimensional structure, used in contact with
30、soil and/or other materials in geotechnical and civil engineering applications2.2.1.1geotextileGTXplanar, permeable, polymeric (synthetic or natural) textile material, which may be nonwoven, knitted, or woven, used in contact with soil and/or other materials in geotechnical and civil engineering app
31、lications2.2.1.1.1nonwoven geotextileGTX-NWgeotextile made of directionally or randomly orientated fibres, filaments, or other elements, mechanically and/or thermally and/or chemically bonded2.2.1.1.2knitted geotextileGTX-Kgeotextile produced by interlooping one or more yarns, filaments, or other el
32、ements2.2.1.1.3woven geotextileGTX-Wgeotextile produced by interlacing, usually at right angles, two or more sets of yarns, filaments, tapes, or other elements2.2.1.2geotextile-related productGTPplanar, permeable, polymeric (synthetic or natural) material used in contact with soil and or other mater
33、ials in geotechnical and civil engineering applications, which does not comply with the definition of a geotextileNote 1 to entry: See geotextile (2.2.1.1).2.2.1.2.1geogridGGRplanar, polymeric structure consisting of a regular open network of integrally connected, tensile elements, which may be link
34、ed by extrusion, bonding, or interlooping or interlacing, whose openings are larger than the constituents2.2.1.2.2geonetGNTgeosynthetic consisting of parallel sets of ribs overlying and integrally connected with similar sets at various angles2 ISO 2015 All rights reserved/Tous droits rservsBS EN ISO
35、 10318-1:2015ISO 10318-1:2015(E/F)2.2.1.2.3geomatGMAthree-dimensional, permeable structure, made of polymeric monofilaments, and/or other elements (synthetic or natural), mechanically and/or thermally and/or chemically and/or otherwise bonded2.2.1.2.4geocellGCEthree-dimensional, permeable, polymeric
36、 (synthetic or natural) honeycomb, or similar cellular structure, made of linked strips of geosynthetics2.2.1.2.5geostripGSTpolymeric material in the form of a strip of width not more than 200 mm, used in contact with soil and/or other materials in geo-technical and civil engineering applications2.2
37、.1.2.6geospacerGSPthree-dimensional polymeric structure with an interconnected air space in between, used in contact with soil and/or other materials in geotechnical and civil engineering applications2.2.1.3geosynthetic barrierGBRlow-permeability geosynthetic material, used in geotechnical and civil
38、 engineering applications with the purpose of reducing or preventing the flow of fluid through the construction2.2.1.3.1polymeric geosynthetic barrierGBR-Pgeomembranefactory-assembled structure of geosynthetic materials in the form of a sheet in which the barrier function is essentially fulfilled by
39、 polymers2.2.1.3.2clay geosynthetic barrierGBR-C geosynthetic clay linerfactory-assembled structure of geosynthetic materials in the form of a sheet in which the barrier function is essentially fulfilled by clay2.2.1.3.3bituminous geosynthetic barrierGBR-Bbituminous geomembranefactory-assembled stru
40、cture of geosynthetic materials in the form of a sheet in which the barrier function is essentially fulfilled by bitumen2.2.1.4geocompositeGCOmanufactured, assembled material using at least one geo-synthetic product among the components ISO 2015 All rights reserved/Tous droits rservs 3BS EN ISO 1031
41、8-1:2015ISO 10318-1:2015(E/F)2.3 Terms related to properties2.3.1 General properties2.3.1.1nominal valueNVvalue of a material property as declared, rather than measured, by the producer/supplier of the material2.3.2 Terms related to physical properties2.3.2.1thicknessddistance between the upper and
42、lower surfaces of a geosynthetic, measured normal to the surfaces and under a specified pressureNote 1 to entry: Unit is expressed in mm.2.3.2.2mass per unit areaAratio of the mass of a specimen of specified dimensions to its areaNote 1 to entry: Unit is expressed in grams per square metre (g/m2).2.
43、3.3 Terms related to hydraulic properties2.3.3.1characteristic opening sizeO90size of opening which corresponds to the maximum particle size of 90 % by weight of the soil passing through the geotextileNote 1 to entry: Unit is expressed in m.2.3.3.2permeabilityrate of fluid transmission through a geo
44、synthetic2.3.3.3coefficient of permeability normal to the planeknratio between flow velocity v and hydraulic gradient i normal to planeNote 1 to entry: Unit is expressed in m/s.2.3.3.4fluxqnvolumetric flow rate per unit area normal to the plane of the product at a defined headNote 1 to entry: Unit i
45、s expressed in l/(m2s).2.3.3.5velocity indexv-indexvelocity corresponding to a head loss of 50 mm across a specimen, in a water permeability testNote 1 to entry: Unit is expressed in mm/s.4 ISO 2015 All rights reserved/Tous droits rservsBS EN ISO 10318-1:2015ISO 10318-1:2015(E/F)2.3.3.6permittivityv
46、olumetric flow rate of water and/or other liquids per unit area per unit head loss, under laminar flow conditions, normal to the plane of a productNote 1 to entry: Unit is expressed in s1.2.3.3.7in-plane flow capacityqpvolumetric flow rate of water and/or other liquids per unit width of specimen, at
47、 defined gradients in the plane of a productNote 1 to entry: Unit is expressed in l/(ms).2.3.3.8transmissivityvolumetric flow rate per unit width of specimen and per unit gradient in the plane of a productNote 1 to entry: Unit is expressed in l/(ms).2.3.3.9liquid tightnessability of a geosynthetic t
48、o retain liquid2.3.4 Terms related to mechanical properties2.3.4.1tensile stress, related to the cross-sectional area of the specimentensile force per cross-sectional area of the specimen prior to loading, carried by a specimen at any given time in a short-term testNote 1 to entry: Tensile stress, r
49、elated to the cross-sectional area of the specimen, is expressed in MPa.2.3.4.1.1yield pointpoint on the stress-strain curve, other than the failure point, at which an increase in strain occurs without an increase in stress2.3.4.1.2tensile stress at yield pointyfirst stress at which an increase in strain occurs without an increase in stressNote 1 to entry: It may be less than the maximum attainable stress.2.3.4.1.3tensile stress at failureftensile stress at which the test specimen ruptures2.3.4.1.4maximum tensile stressmaxmaximum t
