BS EN ISO 10764-2016 Footwear Test methods for slide fasteners Lateral strength《鞋类 拉链的试验方法 横向强度》.pdf

上传人:syndromehi216 文档编号:579894 上传时间:2018-12-15 格式:PDF 页数:14 大小:1.91MB
下载 相关 举报
BS EN ISO 10764-2016 Footwear Test methods for slide fasteners Lateral strength《鞋类 拉链的试验方法 横向强度》.pdf_第1页
第1页 / 共14页
BS EN ISO 10764-2016 Footwear Test methods for slide fasteners Lateral strength《鞋类 拉链的试验方法 横向强度》.pdf_第2页
第2页 / 共14页
BS EN ISO 10764-2016 Footwear Test methods for slide fasteners Lateral strength《鞋类 拉链的试验方法 横向强度》.pdf_第3页
第3页 / 共14页
BS EN ISO 10764-2016 Footwear Test methods for slide fasteners Lateral strength《鞋类 拉链的试验方法 横向强度》.pdf_第4页
第4页 / 共14页
BS EN ISO 10764-2016 Footwear Test methods for slide fasteners Lateral strength《鞋类 拉链的试验方法 横向强度》.pdf_第5页
第5页 / 共14页
亲,该文档总共14页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、BS EN ISO 10764:2016Footwear Test methodsfor slide fasteners Lateralstrength (ISO 10764:2016)BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN ISO 10764:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO10764:2016.The U

2、K participation in its preparation was entrusted to TechnicalCommittee TCI/69, Footwear, leather and coated fabrics.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract.

3、 Users are responsible for its correctapplication. The British Standards Institution 2016. Published by BSI StandardsLimited 2016ISBN 978 0 580 80870 8ICS 61.060Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of

4、theStandards Policy and Strategy Committee on 31 May 2016.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10764 May 2016 ICS 61.060 English Version Footwear - Test methods for slide fasteners - Lateral strength (ISO 10764:2016) Chaussures

5、 - Mthodes dessai des fermetures glissires - Rsistance latrale (ISO 10764:2016) Schuhe - Prfverfahren fr Reiverschlsse - Laterale Festigkeit (ISO 10764:2016) This European Standard was approved by CEN on 15 April 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which s

6、tipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This Europe

7、an Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are

8、the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Roma

9、nia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by

10、 any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10764:2016 EBS EN ISO 10764:2016EN ISO 10764:2016 (E) 3 European foreword This document (EN ISO 10764:2016) has been prepared by Technical Committee CEN/TC 309 “Footwear” the secretariat of which is held by AENOR, in collaborati

11、on with Technical Committee ISO/TC 216 “Footwear”. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2016, and conflicting national standards shall be withdrawn at the latest by November 20

12、16. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organiza

13、tions of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Mal

14、ta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 10764:2016 has been approved by CEN as EN ISO 10764:2016 without any modification. BS EN ISO 10764:2016ISO 10764:2016(E)Foreword iv1 S

15、cope . 12 Normative references 13 Terms and definitions . 14 Apparatus and materials 35 Preparation of test specimens 36 Procedure. 37 Test report . 4 ISO 2016 All rights reserved iiiContents PageBS EN ISO 10764:2016ISO 10764:2016(E)ForewordISO (the International Organization for Standardization) is

16、 a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represen

17、ted on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop

18、this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC

19、 Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the d

20、evelopment of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of I

21、SO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationISO 10764 was prepared by the European Committee Standardization (

22、CEN) Technical Committee CEN/TC 309, Footwear, in collaboration with ISO Technical Committee TC 216, Footwear, in accordance with the agreement on technical cooperation between ISO and CEN (Vienna Agreement).iv ISO 2016 All rights reservedBS EN ISO 10764:2016INTERNATIONAL STANDARD ISO 10764:2016(E)F

23、ootwear Test methods for slide fasteners Lateral strength1 ScopeThis International Standard describes a method intended to assess the lateral strength of a closed slide fastener for footwear. The method is applicable to all types of slide fastener.2 Normative referencesThe following documents, in wh

24、ole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 7500-1, Metallic materials Verific

25、ation of static uniaxial testing machines Part 1: Tension/compression testing machines Verification and calibration of the force-measuring systemISO 18454, Footwear Standard atmospheres for conditioning and testing of footwear and components of footwearISO 19952, Footwear Vocabulary3 Terms and defin

26、itionsFor the purposes of this document, the terms and definitions given in ISO 19952 and the following apply.3.1slide fastenermeans of securing two flexible materials consisting of interlockable teeth each attached to one of the opposing edges of two tapes and movable slider that spans the interloc

27、king teeth which when moved in one direction causes the teeth (3.5) of one tape (3.2) to interlock with the teeth of the other tapeNote 1 to entry: When the slider (3.3) is moved in the opposite direction, it causes the teeth to disengage (see Figure 1). ISO 2016 All rights reserved 1BS EN ISO 10764

28、:2016ISO 10764:2016(E)12345Key1 top stop 4 puller2 teeth 5 tape3 slider 6 bottom stopFigure 1 Slide fastener3.2tapefabric panels to support other teeth (3.5) of the slide fastener (3.1)3.3slidermeans of drawing the two interlocking teeth together or apart as it traverses the length of the teeth (3.5

29、)3.4pullerpiece of plastic or metal attached to the slider (3.3) as a means of manual grip for the user to operate3.5teethindividual component of the slide fastener (3.1) or continuous plastic spiral which interlocks with an opposing element3.6end stoptop stopterminal components of the teeth (3.5) t

30、o prevent the slider (3.3) from disengaging from the teeth and tape (3.2)3.7stringertextile tape with an attached row of teeth (3.5) designed to interact with a row attached to another tape (3.2)2 ISO 2016 All rights reservedBS EN ISO 10764:2016ISO 10764:2016(E)4 Apparatus and materials4.1 A tensile

31、 testing machine with the following.4.1.1 A jaw separation rate of (100 10) millimetres per minute (mm/min).4.1.2 A means of recording the maximum force during the test to an accuracy of 2 % as specified by Class 2 in ISO 7500-1, up to a value of 2,0 kN.4.1.3 Two clamps which have square ends of wid

32、th (25,5 0,5) mm, have clamping surfaces; either corrugated, or flat and coated with abrasive paper, and do not apply localised pressure at the clamping edge.4.2 A locating jig to hold the two clamps (4.1.3) with their clamping edges parallel and their centres aligned may be helpful. A metal block o

33、f minimum dimensions 200 mm 30 mm 10 mm with a shallow trough of minimum length 200 mm and width less than 26 mm, but large enough to enable the clamps (4.1.3) to move freely is suitable.4.3 For heavy duty slide fasteners, solvent based polychloroprene adhesive to aid gripping of the stringer by the

34、 clamp (4.1.3).5 Preparation of test specimens5.1 A minimum of three test positions are required, each with a length of at least 50 mm of free closed fastener on either side.5.2 If three slide fasteners are available, then each fastener should be tested at the centre of its length.5.3 If only one sl

35、ide fastener is available, then it should be tested at three positions, one at least 50 mm from each end and one at the centre of its length. The length of free closed fastener on either side of the clamped area during the test should be at least 50 mm, therefore, the overall length of the teeth sho

36、uld be at least 275 mm. Each test may separate a length of the teeth so for teeths of total length close to 275 mm, it will not be possible to identify the adjacent test position exactly until after each individual test.5.4 At each test point, mark a line of length (25 2) mm on each stringer which i

37、s parallel to, and (3,0 0,5) mm from, the edge of the teeth, and at least 50 mm from either end of the fastener.5.5 For heavy duty slide fasteners, apply a coat of the adhesive (6.3) to both surfaces of each stringer over an area, approximately 15 mm on either side of each test point, and allow to d

38、ry for at least 2 h.6 Procedure6.1 Close the test fastener(s).6.2 Condition the test specimen according to ISO 18454 for 24 h before the test and carry out the test in this environment. ISO 2016 All rights reserved 3BS EN ISO 10764:2016ISO 10764:2016(E)6.3 At one of the test positions, tightly fit a

39、 clamp (4.1.3) to each stringer so that the clamping edge is centrally aligned with the corresponding line (5.4). If a locating jig (4.2) is available, then it should be used. For heavy duty slide fasteners, a very high clamping force is necessary, whereas, with light duty fasteners, care is require

40、d to avoid excessively damaging the stringer.Dimensions in millimeters25 2 3 min3 minFigure 2 Clamping arrangement for test specimen6.4 Insert the clamps (6.3) into the tensile testing machine so that the test point is aligned with, and the teeth of the fastener is, at 90 to the axis of the machine.

41、6.5 Operate the tensile testing machine with a jaw separation rate of (100 10) millimetres per minute (mm/min) until the fastener fails.6.6 Record the maximum force obtained in Newtons to the nearest Newton and the type of failure such as the following: separation of locked teeth from each other; te

42、eth pulled off stringer; stringer failure; stringer tore at clamping edge; clamps slipped off stringer.6.7 If the stringer tore at the clamping edge, or the clamp slipped off the stringer, then repeat the test at a fresh point using either a higher or lower clamping force as necessary. If it is not

43、possible to select a suitable clamping force to cause the teeth to fail, then record the maximum force from the test conditions which gave the highest result.6.8 Repeat the procedure in 6.3 to 6.7 at the other test positions.6.9 For each type of failure that occurred, calculate the arithmetic mean o

44、f the maximum forces (6.6).7 Test reportThe test report shall include the following information:a) a reference to this International Standard, i.e. ISO 10764;4 ISO 2016 All rights reservedBS EN ISO 10764:2016ISO 10764:2016(E)b) a full description of the samples tested;c) the date of testing;d) the a

45、rithmetic mean maximum force(s), as in 6.9;e) a description of the type(s) of failure;f) any deviations from this test method. ISO 2016 All rights reserved 5This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and othe

46、r standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring together business, industry, government, consumers, innovat

47、ors and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose stan

48、dards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and

49、 download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the content in BSI publications, including British Standards, is the property of and copyrighted

展开阅读全文
相关资源
  • BS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdfBS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdf
  • BS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdfBS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdf
  • BS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdfBS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdf
  • BS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdfBS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdf
  • BS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdfBS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdf
  • BS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdfBS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdf
  • BS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdfBS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdf
  • BS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdfBS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdf
  • BS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdfBS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdf
  • BS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdfBS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > BS

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1