BS EN ISO 11058-2010 Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane without load《土工织物和土工织物相关产品 无负载垂直于平面的水渗透特性.pdf

上传人:sumcourage256 文档编号:579956 上传时间:2018-12-15 格式:PDF 页数:24 大小:616.77KB
下载 相关 举报
BS EN ISO 11058-2010 Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane without load《土工织物和土工织物相关产品 无负载垂直于平面的水渗透特性.pdf_第1页
第1页 / 共24页
BS EN ISO 11058-2010 Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane without load《土工织物和土工织物相关产品 无负载垂直于平面的水渗透特性.pdf_第2页
第2页 / 共24页
BS EN ISO 11058-2010 Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane without load《土工织物和土工织物相关产品 无负载垂直于平面的水渗透特性.pdf_第3页
第3页 / 共24页
BS EN ISO 11058-2010 Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane without load《土工织物和土工织物相关产品 无负载垂直于平面的水渗透特性.pdf_第4页
第4页 / 共24页
BS EN ISO 11058-2010 Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane without load《土工织物和土工织物相关产品 无负载垂直于平面的水渗透特性.pdf_第5页
第5页 / 共24页
亲,该文档总共24页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、BS EN ISO11058:2010ICS 59.080.70NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDGeotextiles andgeotextile-relatedproducts Determination ofwater permeabilitycharacteristics normalto the plane, withoutload (ISO 11058:2010)This British Standardwas published under t

2、heauthority of the StandardsPolicy and StrategyCommittee on 31 May2010. BSI 2010ISBN 978 0 580 67999 5Amendments/corrigenda issued since publicationDate CommentsBS EN ISO 11058:2010National forewordThis British Standard is the UK implementation of EN ISO 11058:2010.It supersedes BS EN ISO 11058:1999

3、 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee B/553, Geotextiles and geomembranes.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisio

4、nsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11058 April 2010 ICS 59.080.70 Supersedes EN ISO 11058:1999English Version Geotextiles and geote

5、xtile-related products - Determination of water permeability characteristics normal to the plane, without load (ISO 11058:2010) Gotextiles et produits apparents - Dtermination des caractristiques de permabilit leau normalement au plan, sans contrainte mcanique (ISO 11058:2010) Geotextilien und geote

6、xtilverwandte Produkte - Bestimmung der Wasserdurchlssigkeit normal zur Ebene, ohne Auflast (ISO 11058:2010) This European Standard was approved by CEN on 15 March 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

7、Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, F

8、rench, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croa

9、tia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDI

10、ZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11058:2010: EBS EN ISO 11058:2010EN ISO 11058:2010 (

11、E) 3 Foreword This document (EN ISO 11058:2010) has been prepared by Technical Committee ISO/TC 221 “Geosynthetics“ in collaboration with Technical Committee CEN/TC 189 “Geosynthetics”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard,

12、either by publication of an identical text or by endorsement, at the latest by October 2010, and conflicting national standards shall be withdrawn at the latest by October 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN

13、and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 11058:1999. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements

14、 of EU Directive(s). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hung

15、ary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 11058:2010 has been approved by CEN as a EN ISO 11058:2010 without any modific

16、ation. BS EN ISO 11058:2010ISO 11058:2010(E) ISO 2010 All rights reserved iiiContents Page Foreword iv 1 Scope1 2 Normative references1 3 Terms and definitions .1 4 Test specimens2 4.1 Handling .2 4.2 Selection.2 4.3 Number and dimensions.2 4.4 Condition of specimens2 5 Constant head method2 5.1 Pri

17、nciple2 5.2 Apparatus.2 5.3 Procedure.3 5.4 Calculation and expression of results 4 6 Falling head method4 6.1 Principle4 6.2 Apparatus.5 6.3 Procedure.6 6.4 Calculation and expression of results 6 7 Test report7 Annex A (informative) Determination of the correction factor, RT, to a water temperatur

18、e of 20 C12 Annex B (informative) Relationship between head loss and flow velocity.14 Annex C (informative) Velocity index16 Annex D (informative) Experimental data and calculations .17 BS EN ISO 11058:2010ISO 11058:2010(E) iv ISO 2010 All rights reservedForeword ISO (the International Organization

19、for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has t

20、he right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Interna

21、tional Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publicatio

22、n as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights

23、. ISO 11058 was prepared by Technical Committee ISO/TC 221, Geosynthetics. This second edition cancels and replaces the first edition (ISO 11058:1999), which has been technically revised. BS EN ISO 11058:2010INTERNATIONAL STANDARD ISO 11058:2010(E) ISO 2010 All rights reserved 1Geotextiles and geote

24、xtile-related products Determination of water permeability characteristics normal to the plane, without load 1 Scope This International Standard specifies two test methods for determining the water permeability characteristics of a single layer of geotextile or geotextile-related product normal to t

25、he plane: a) the constant head method; b) the falling head method. NOTE If the full permeability characteristics of the geotextile or geotextile-related product have previously been established, then for control purposes it can be sufficient to determine the velocity index at a head loss of 50 mm on

26、ly. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 2854, Statistical

27、interpretation of data Techniques of estimation and tests relating to means and variances ISO 5813, Water quality Determination of dissolved oxygen Iodometric method ISO 9862, Geosynthetics Sampling and preparation of test specimens ISO 10320, Geotextiles and geotextile-related products Identificati

28、on on site 3 Terms and definitions For the purposes of this document the following terms and definitions apply. 3.1 velocity index VH50velocity corresponding to a head loss of 50 mm across a specimen, expressed to the nearest 1 mm/s BS EN ISO 11058:2010ISO 11058:2010(E) 2 ISO 2010 All rights reserve

29、d4 Test specimens 4.1 Handling The sample shall not be folded and shall be handled as infrequently as possible to avoid disturbance to its structure. The sample shall be kept in a flat position without any load. 4.2 Selection Take specimens from the sample according to ISO 9862. 4.3 Number and dimen

30、sions Cut five test specimens from the sample, each of suitable dimensions for the water permeability apparatus to be used. If it is necessary to determine the results to within a given confidence interval of the mean, the number of test specimens shall be determined in accordance with ISO 2854. 4.4

31、 Condition of specimens The specimens shall be clean, free from surface deposits and without visible damage or folding marks. 5 Constant head method 5.1 Principle A single, unloaded layer of geotextile or geotextile-related product is subjected to a unidirectional flow of water normal to the plane u

32、nder a range of constant heads. 5.2 Apparatus 5.2.1 Apparatus in which it is possible to observe the presence of air bubbles on the surface of the specimen, with an internal diameter of minimum 50 mm, complying with the following requirements. a) The apparatus shall be capable of installing a maximu

33、m head loss of at least 70 mm and maintaining a constant head for the duration of each test with water on both sides of the specimen. It shall be capable of achieving a constant water head of up to 250 mm. NOTE Some examples of apparatus are shown in Figure 1. b) The mean internal diameter of the ap

34、paratus shall be known to an accuracy of at least 0,1 mm. The exposed diameter of the specimen shall be the same as the internal diameter of the apparatus. The diameter of the apparatus shall remain identical on both sides of the specimen over a length of at least twice its internal diameter see Fig

35、ures 1 a) and 1 b). Abrupt changes in diameter shall be avoided. Alternatively see Figure 1 c), the outflow may discharge into a reservoir with a diameter of at least four times the exposed diameter of the specimen. In this case, the distance from the geotextile to the base of the reservoir shall be

36、 at least 1,5 times the exposed diameter of the specimen. If the product shows an obvious pattern, this pattern shall be included at least three times along any diameter of the specimen. c) Where necessary, to avoid any visible deformation, a grid of 1 mm diameter wire and a mesh size of (10 1) mm s

37、hall be placed downstream of the specimen to support it during the test. d) The head loss measured at any velocity when a test is performed without the test specimen, but including any specimen-supporting grid, shall be less than 1 mm. BS EN ISO 11058:2010ISO 11058:2010(E) ISO 2010 All rights reserv

38、ed 35.2.2 Water supply, of the following quality and condition. a) The water shall be at a temperature of between 18 C and 22 C. NOTE As the temperature correction (see Annex A) relates only to laminar flow, it is advisable to work at temperatures as close as possible to 20 C to minimize inaccuracie

39、s associated with inappropriate correction factors, should the flow be non-laminar. b) Water may not be fed into the apparatus directly from a mains supply due to problems caused by the release of air bubbles, which can be entrapped in the structure of the specimen. The water should preferably be de

40、-aired or fed from a stilling tank. The water should not be continuously recycled. c) The oxygen content shall not exceed 10 mg/kg. The oxygen content shall be measured at the point at which the water enters the apparatus. d) The water shall be filtered if suspended solids are visible to the naked e

41、ye or if solids accumulate on or in the specimen, thus reducing the flow with time. 5.2.3 Dissolved-oxygen meter, or apparatus complying with ISO 5813. 5.2.4 Stopwatch, with an accuracy of 0,2 s. 5.2.5 Thermometer, with an accuracy of 0,5 C. 5.2.6 Measuring vessel, of appropriate size for determinin

42、g the volume of water to an accuracy of 1 % of the capacity of the vessel. When the water flow is determined by volume, use a measuring vessel for determining volume to an accuracy of 1 %. When direct measurement of water flow velocity is made by gauge, the flow velocity shall be measured to an accu

43、racy of 5 %. When determining the water volume by mass, it shall be determined to an accuracy of 1 %. 5.2.7 Measurement device for determining the applied head, to an accuracy of 3 %. 5.3 Procedure 5.3.1 Place the specimens under water containing a wetting agent at laboratory temperature, gently sti

44、r to remove air bubbles and leave to saturate for at least 12 h. The wetting agent is aryl alkyl sodium sulfonate at 0,1 % volume. 5.3.2 Place a specimen in the apparatus and ensure that all joints are watertight. 5.3.3 Fill the apparatus with water until there is a 50 mm water head difference acros

45、s the specimen. Shut off the water supply and if the water heads do not equalize on each side of the specimen within 5 min, investigate the likelihood of any trapped air within the apparatus and repeat the procedure. If the water heads cannot be equalized within 5 min, this shall be noted in the tes

46、t report. 5.3.4 Adjust the flow to attain a head loss of (70 5) mm and record this value to the nearest 1 mm. When the head has been steady for a minimum of 30 s, collect the water passing through the system in the measuring vessel over a fixed period of time and record the volume of water collected

47、 to the nearest 10 cm3and the time to the nearest 1 s. The volume of water collected should be a minimum of 1 000 cm3and the collection time should be a minimum of 30 s. When the water flow is determined by volume, the volume of the measuring vessel shall not exceed twice the volume of the collected

48、 water. If a flow velocity gauge is used, then a maximum velocity giving a head loss of about 70 mm should be set. The real velocity shall be taken as the average of three consecutive readings with a minimum time interval between readings of 15 s. BS EN ISO 11058:2010ISO 11058:2010(E) 4 ISO 2010 All

49、 rights reserved5.3.5 Repeat 5.3.4 for four lower head losses of approximately 0,8; 0,6; 0,4 and 0,2 times the maximum head loss, starting with the highest velocity and ending with the lowest. NOTE If the full permeability characteristics of the geotextile or geotextile-related product have previously been established, then for control purposes it can be sufficient to determine the velocity index at a head loss of 50 mm only. The same principle applies to the velocity when using a flow velocity gauge. 5.3.6 Record the wate

展开阅读全文
相关资源
  • BS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdfBS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdf
  • BS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdfBS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdf
  • BS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdfBS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdf
  • BS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdfBS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdf
  • BS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdfBS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdf
  • BS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdfBS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdf
  • BS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdfBS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdf
  • BS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdfBS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdf
  • BS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdfBS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdf
  • BS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdfBS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > BS

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1