1、Building acoustics - Estimation of acoustic performance of buildings from the performance of elementsPart 4: Transmission of indoor sound to the outsideBS EN ISO 123544:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE N
2、ORM EN ISO 12354-4 August 2017 ICS 91.120.20 Supersedes EN 12354-4:2000English Version Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 4: Transmission of indoor sound to the outside (ISO 12354-4:2017) Acoustique du btiment - Calcul de la p
3、erformance acoustique des btiments partir de la performance des lments - Partie 4: Transmission du bruit intrieur lextrieur (ISO 12354-4:2017) Bauakustik - Berechnung der akustischen Eigenschaften von Gebuden aus den Bauteileigenschaften - Teil 4: Schallbertragung von Rumen ins Freie (ISO 12354-4:20
4、17) This European Standard was approved by CEN on 22 April 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical r
5、eferences concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a
6、 CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Maced
7、onia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISAT
8、ION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 12354-4:2017 ENational forewordThis British Standard is the UK implementat
9、ion of EN ISO 123544:2017. It is identical to ISO 123544:2017. It supersedes BS EN 123544:2000, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee EH/1/6, Building acoustics.A list of organizations represented on this committee can be obtained on request
10、to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 92662 4ICS 91.120.20Compliance with a British Stan
11、dard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN ISO 123544:2017EUROPEAN STANDARD NORME
12、EUROPENNE EUROPISCHE NORM EN ISO 12354-4 August 2017 ICS 91.120.20 Supersedes EN 12354-4:2000English Version Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 4: Transmission of indoor sound to the outside (ISO 12354-4:2017) Acoustique du bt
13、iment - Calcul de la performance acoustique des btiments partir de la performance des lments - Partie 4: Transmission du bruit intrieur lextrieur (ISO 12354-4:2017) Bauakustik - Berechnung der akustischen Eigenschaften von Gebuden aus den Bauteileigenschaften - Teil 4: Schallbertragung von Rumen ins
14、 Freie (ISO 12354-4:2017) This European Standard was approved by CEN on 22 April 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists
15、 and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under t
16、he responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugo
17、slav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT
18、 EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 12354-4:2017 EBS EN ISO 123544:2017EN ISO 12354-4:20
19、17 (E) 3 European foreword This document (EN ISO 12354-4:2017) has been prepared by Technical Committee ISO/TC 43 “Acoustics” in collaboration with Technical Committee CEN/TC 126 “Acoustic properties of building elements and of buildings” the secretariat of which is held by AFNOR. This European Stan
20、dard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2018, and conflicting national standards shall be withdrawn at the latest by February 2018. Attention is drawn to the possibility that some of the elements o
21、f this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12354-4:2000. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound
22、 to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
23、 Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 12354-4:2017 has been approved by CEN as EN ISO 12354-4:2017 without any modification. ISO 12354-4:2017(E)ForewordISO (the International Organization for Standardizatio
24、n) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be rep
25、resented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to dev
26、elop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the IS
27、O/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified duri
28、ng the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the m
29、eaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html.This document was prepared by
30、 the European Committee for Standardization (CEN) Technical Committee CEN/TC 126, Acoustic properties of building elements and of buildings, in collaboration with ISO Technical Committee TC 43, Acoustics, SC 2, Building acoustics, in accordance with the agreement on technical cooperation between ISO
31、 and CEN (Vienna Agreement).This first edition cancels and replaces ISO 15712-4:2005, which has been technically revised. A list of all the parts in the ISO 12354 series can be found on the ISO website.iv ISO 2017 All rights reservedBS EN ISO 123544:2017ISO 12354-4:2017(E)ForewordISO (the Internatio
32、nal Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been
33、established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standar
34、dization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance
35、 with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details o
36、f any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endo
37、rsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword
38、.html.This document was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 126, Acoustic properties of building elements and of buildings, in collaboration with ISO Technical Committee TC 43, Acoustics, SC 2, Building acoustics, in accordance with the agreement o
39、n technical cooperation between ISO and CEN (Vienna Agreement).This first edition cancels and replaces ISO 15712-4:2005, which has been technically revised. A list of all the parts in the ISO 12354 series can be found on the ISO website.iv ISO 2017 All rights reservedBS EN ISO 123544:2017ISO 12354-4
40、:2017(E)IntroductionThis document is part of a series specifying calculation models in building acoustics.Although this document covers the main types of building construction it cannot as yet cover all variations in the construction of buildings. It sets out an approach for gaining experience for f
41、uture improvements and developments.The accuracy of this document alone is difficult to specify since it forms just one link in the chain of inside sound level, sound radiation and sound propagation outdoors; the first and last item are not covered by this document. The accuracy can only be specifie
42、d after widespread comparisons with field data in combination with other prediction standards, i.e. those for outdoor sound propagation. It is the responsibility of the user (i.e. a person, an organization, the authorities) to address the consequences of the accuracy, inherent for all measurement an
43、d prediction methods, by specifying requirements for the input data and/or applying a safety margin to the results or applying some other correction.It is intended for acoustical experts and provides the framework for the development of application documents and tools for other users in the field of
44、 building construction, taking into account local circumstances. ISO 2017 All rights reserved vBS EN ISO 123544:2017ISO 12354-4:2017(E)IntroductionThis document is part of a series specifying calculation models in building acoustics.Although this document covers the main types of building constructi
45、on it cannot as yet cover all variations in the construction of buildings. It sets out an approach for gaining experience for future improvements and developments.The accuracy of this document alone is difficult to specify since it forms just one link in the chain of inside sound level, sound radiat
46、ion and sound propagation outdoors; the first and last item are not covered by this document. The accuracy can only be specified after widespread comparisons with field data in combination with other prediction standards, i.e. those for outdoor sound propagation. It is the responsibility of the user
47、 (i.e. a person, an organization, the authorities) to address the consequences of the accuracy, inherent for all measurement and prediction methods, by specifying requirements for the input data and/or applying a safety margin to the results or applying some other correction.It is intended for acous
48、tical experts and provides the framework for the development of application documents and tools for other users in the field of building construction, taking into account local circumstances. ISO 2017 All rights reserved vBS EN ISO 123544:2017Building acoustics Estimation of acoustic performance of
49、buildings from the performance of elements Part 4: Transmission of indoor sound to the outside1 ScopeThis document specifies a calculation model to estimate the sound power level radiated by the envelope of a building due to airborne sound inside that building, primarily by means of measured sound pressure levels inside the building and measured data which characterize the sound transmission by the relevant elements and openings in the building envelope. These sound power levels, together with those of other sound sour
