1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 14451-10:2013Pyrotechnic articles Pyrotechnic articles for vehiclesPart 10: Requirements and categorization for semi-finished products BS EN ISO 14451-10:2013 BRITISH S
2、TANDARDNational forewordThis British Standard is the UK implementation of EN ISO 14451-10:2013.The UK participation in its preparation was entrusted to T e c h n i c a lCommittee CII/47, Pyrotechnic articles.A list of organizations represented on this committee can beobtained on request to its secre
3、tary.This publication does not purport to include all the necessary provi-sions of a contract. Users are responsible for its correct application. The British Standards Institution 2013. Published by BSI Standards Limited 2013 ISBN 978 0 580 69671 8 ICS 43.040.80 Compliance with a British Standard ca
4、nnot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 May 2013.Amendments issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 14451-10 March 2013
5、ICS 43.040.80 English Version Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 10: Requirements and categorization for semi-finished products (ISO 14451-10:2013) Articles pyrotechniques - Articles pyrotechniques pour vhicules - Partie 10: Exigences relatives aux produits semi-finis et
6、 leur classement en catgories (ISO 14451-10:2013) Pyrotechnische Gegenstnde - Pyrotechnische Gegenstnde fr Fahrzeuge - Teil 10: Anforderungen und Kategorisierung von Halbfertigerzeugnissen (ISO 14451-10:2013) This European Standard was approved by CEN on 9 February 2013. CEN members are bound to com
7、ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELE
8、C Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the s
9、ame status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembour
10、g, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All
11、rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 14451-10:2013: EBS EN ISO 14451-10:2013EN ISO 14451-10:2013 (E) 3 Foreword This document (EN ISO 14451-10:2013) has been prepared by Technical Committee CEN/TC 212“Pyrotechnic articles” t
12、he secretariat of which is held by NEN, in collaboration with Technical CommitteeISO/TC 22 “Road vehicles“. This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by September 2013, and conflicting national
13、standards shall bewithdrawn at the latest by September 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patentrights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been pre
14、pared under a mandate given to CEN by the European Commission and theEuropean Free Trade Association, and supports essential requirements of EU Directive. For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document. According to the CEN-CENELEC Internal R
15、egulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, CzechRepublic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,Hungary, Iceland, Ireland, I
16、taly, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 14451-10:2013 has been approved by CEN as EN ISO 14451-10:2013 without anymodification. BS EN I
17、SO 14451-10:2013EN ISO 14451-10:2013 (E) 4 Annex ZA (informative) Relationship between this European Standard and the EssentialRequirements of EC Directive 2007/23/EC on the placing on the marketof pyrotechnic articles This European Standard has been prepared under a mandate given to CEN by the Euro
18、pean Commissionand the European Free Trade Association to provide one means of conforming to Essential Requirements ofthe New Approach Directive 2007/23/EC on the placing on the market of pyrotechnic articles. Once this standard is cited in the Official Journal of the European Union under that Direc
19、tive and has beenimplemented as a national standard in at least one Member State, compliance with the normative clauses ofthis standard given in Table ZA.1 confers, within the limits of the scope of this standard, a presumption ofconformity with the corresponding Essential Requirements of that Direc
20、tive and associated EFTA regulations. Table ZA.1 Correspondence between this European Standard and Directive 2007/23/EC on theplacing on the market of pyrotechnic articles (1 of 2) Clause(s)/sub-clause(s) of this document Essential Safety Requirements (ESRs) of Directive 2007/23/EC Qualifying remark
21、s/Notes 4.2 (1) Note: It is taken into account that the intended purpose of the pyrotechnic article is to function in a vehicle in case of accidents (2) See ISO 14451-2 4.2 (3) 1st sentence 4.2 (3) 2nd and 3rd sentences Note: It is taken into account that the intended purpose of the pyrotechnic arti
22、cle is to function in a vehicle in case of accidents (3a) See ISO 14451-2 4.2 (3b) 4.2 (3c) 4.2 (3d) 4.2 (3e) 4.2 (3f) 4.2 (3g) (3h) See ISO 14451-3 4.2 (3i) (3j) See ISO 14451-2 4.2 (3) Last sentence 1 (4a) 1 (4b) BS EN ISO 14451-10:2013EN ISO 14451-10:2013 (E) 5 Table ZA.1 (2 of 2) Clause(s)/sub-c
23、lause(s) of this document Essential Safety Requirements (ESRs) of Directive 2007/23/EC Qualifying remarks/Notes 4.2, 5 (5 B.1) (5 B.2) See ISO 14451-2 and ISO 14451-3 4.2 (5 B.3) (5 B.4) Not applicable (5 C.1) to (5 C.5) Not applicable 4.2 (5 C.6) If applicable (5 C.7) Not applicable WARNING Other r
24、equirements and other EU Directives may be applicable to the product(s) falling within the scope of this part of EN ISO 14451. BS EN ISO 14451-10:2013ISO 14451-10:2013(E) ISO 2013 All rights reserved iiiContents PageForeword iv1 Scope . 12 Normative references 13 Terms and definitions . 14 Requireme
25、nts and acceptance criteria . 14.1 General . 14.2 Verification of design and documentation 15 Categorization . 1BS EN ISO 14451-10:2013ISO 14451-10:2013(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The
26、work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-gover
27、nmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The
28、main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.A
29、ttention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.ISO 14451-10 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/T
30、C 212, Pyrotechnic articles, in collaboration with Technical Committee ISO/TC 22, Road vehicles, Subcommittee SC 12, Passive safety crash protection systems, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).ISO 14451 consists of the following parts, un
31、der the general title Pyrotechnic articles Pyrotechnic articles for vehicles: Part 1: Terminology Part 2: Test methods Part 3: Labelling Part 4: Requirements and categorization for micro gas generators Part 5: Requirements and categorization for airbag gas generators Part 6: Requirements and categor
32、ization for airbag modules Part 7: Requirements and categorization for seatbelt pretensioners Part 8: Requirements and categorization for igniters Part 9: Requirements and categorization for actuators Part 10: Requirements and categorization for semi-finished productsiv ISO 2013 All rights reservedB
33、S EN ISO 14451-10:2013INTERNATIONAL STANDARD ISO 14451-10:2013(E)Pyrotechnic articles Pyrotechnic articles for vehicles Part 10: Requirements and categorization for semi-finished products1 ScopeThis part of ISO 14451 specifies the types and order of tests to be applied to the semi finished products
34、and sets out the acceptance criteria and means of categorization.This part of ISO 14451 applies to type tests.This part of ISO 14451 is not applicable to articles containing military explosives or commercial blasting agents except for black powder or flash composition.2 Normative referencesThe follo
35、wing referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 14451-1, Pyrotechnic articles Pyrotechnic articles for
36、vehicles Part 1: TerminologyISO 14451-2:2013, Pyrotechnic articles Pyrotechnic articles for vehicles Part 2: Test methods3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 14451-1 apply.4 Requirements and acceptance criteria4.1 GeneralThe semi-finished p
37、roduct shall meet the requirements specified in 4.2.4.2 Verification of design and documentationDocumentation shall be complete as specified in ISO 14451-2:2013, 4.1.NOTE Additional test results (if available) performed on upper level pyrotechnic articles (assemblies) or sub-level pyrotechnic articl
38、es (components) can be evaluated for the conformity assessment of the semi-finished product.5 Categorization5.1 Semi-finished products are categorized as follows: Category P1: Semi-finished products that present a low hazard; Category P2: Semi-finished products that are intended for handling or use
39、only by persons with specialist knowledge. ISO 2013 All rights reserved 1BS EN ISO 14451-10:2013ISO 14451-10:2013(E)5.2 The assignment to P1 or P2 is done according to the following criteria: P1 criteria: Examination of the documentation proves the article provides low hazard. P2 criterion: If P1 cr
40、iteria are not fulfilled.2 ISO 2013 All rights reservedBS EN ISO 14451-10:2013This page deliberately left blankThis page deliberately left blankBSI is the independent national body responsible for preparing British Standards and other standards-related publications, information and services. It pres
41、ents the UK view on standards in Europe and at the international level. BSI is incorporated by Royal Charter. British Standards and other standardisation products are published by BSI Standards Limited.British Standards Institution (BSI)raising standards worldwideBSI389 Chiswick High Road London W4
42、4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards and PASs are periodically updated by amendment or revision. Users of British Standards and PASs should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and ser
43、vices. We would be grateful if anyone finding an inaccuracy or ambiguity while using British Standards would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside frontcover. Similary for PASs, please notify BSI Customer Services.Tel: +44 (0)20
44、 8996 9001 Fax: +44 (0)20 8996 7001BSI offers BSI Subscribing Members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of British Standards and PASs.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy
45、PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders f
46、or international standards, BSI will supply the British Standard implementation of the relevant international standard, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (
47、0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: BSI Subscribing Members are kept up to date with standards developments and receive substantial discounts on the purchase priceof standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)2
48、0 8996 7001 Email: Information regarding online access to British Standards and PASs via British Standards Online can be found at information about British Standards is available on the BSI website at www.bsi- the data, software and documentation set out in all British Standards and other BSI publ
49、ications are the property of and copyrighted by BSI, or some person or entity that own copyright in the information used (such as the international standardisation bodies) has formally licensed such information to BSI for commerical publication and use. Except as permitted under the Copyright, Designs and Patents Ac
