1、BS EN ISO17201-3:2010ICS 17.140.20; 95.020; 97.220.10NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAcoustics Noise fromshooting rangesPart 3: Guidelines for soundpropagation calculations (ISO17201-3:2010)This British Standardwas published under theauthority of
2、 the StandardsPolicy and StrategyCommittee on 30 April2010 BSI 2010ISBN 978 0 580 54433 0Amendments/corrigenda issued since publicationDate CommentsBS EN ISO 17201-3:2010National forewordThis British Standard is the UK implementation of EN ISO17201-3:2010.The UK participation in its preparation was
3、entrusted to TechnicalCommittee EH/1/3, Residential and industrial noise.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct appl
4、ication.Compliance with a British Standard cannot confer immunityfrom legal obligations.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 17201-3 February 2010 ICS 97.220.10; 17.140.20; 95.020 English Version Acoustics - Noise from shooting ranges - Part 3: Guidelines for sound propagation ca
5、lculations (ISO 17201-3:2010) Acoustique - Bruit des stands de tir - Partie 3: Lignes directrices pour le calcul de la propagation du son (ISO 17201-3:2010) Akustik - Gerusche von Schiepltzen - Teil 3: Anleitung fr die Berechnung der Schallausbreitung (ISO 17201-3:2010) This European Standard was ap
6、proved by CEN on 28 November 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nati
7、onal standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and
8、notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, L
9、uxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All
10、rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 17201-3:2010: EBS EN ISO 17201-3:2010EN ISO 17201-3:2010 (E) 3 Foreword This document (EN ISO 17201-3:2010) has been prepared by Technical Committee ISO/TC 43 “Acoustics“ in collaboration
11、 with Technical Committee CEN/TC 211 “Acoustics” the secretariat of which is held by DS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2010, and conflicting national standards shall be wi
12、thdrawn at the latest by August 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulation
13、s, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, N
14、etherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 17201-3:2010 has been approved by CEN as a EN ISO 17201-3:2010 without any modification. BS EN ISO 17201-3:2010ISO 17201-3:2010(E) ISO 2010 All rig
15、hts reserved iiiContents Page Foreword iv Introduction.v 1 Scope1 2 Normative references1 3 Terms and definitions .2 4 Source modelling 3 5 Propagation calculation4 6 Conversion of sound exposure levels 9 7 Uncertainties10 Annex A (normative) Benchmark cases for shooting sheds with baffles 11 Annex
16、B (normative) Sophisticated modelling approaches.26 Annex C (informative) Modelling of shooting scenarios examples of shooting ranges 35 Annex D (informative) Uncertainty 50 Bibliography54 BS EN ISO 17201-3:2010ISO 17201-3:2010(E) iv ISO 2010 All rights reservedForeword ISO (the International Organi
17、zation for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been establishe
18、d has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
19、International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Pub
20、lication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent
21、 rights. ISO 17201-3 was prepared by Technical Committee ISO/TC 43, Acoustics, Subcommittee SC 1, Noise. ISO 17201 consists of the following parts, under the general title Acoustics Noise from shooting ranges: Part 1: Determination of muzzle blast by measurement Part 2: Estimation of muzzle blast an
22、d projectile sound by calculation Part 3: Guidelines for sound propagation calculations Part 4: Prediction of projectile sound Part 5: Noise management BS EN ISO 17201-3:2010ISO 17201-3:2010(E) ISO 2010 All rights reserved vIntroduction The initiative to prepare a standard on impulse noise from shoo
23、ting ranges was taken by the Association of European Manufacturers of Sporting Ammunition (AFEMS), in April 1996 by the submission of a formal proposal to CEN (see doc. CEN N 1085). After consultation in CEN in 1998, CEN/TC 211, Acoustics, asked ISO/TC 43, Acoustics, Subcommittee SC 1, Noise to prep
24、are ISO 17201 (all parts). This part of ISO 17201 provides guidance for sound propagation calculation of shooting sound from shooting ranges. If calculation procedures are not implied or specified by local or national guidelines, rules and regulations, and if a more sophisticated propagation model i
25、s not available, then ISO 9613-2 may be applied, provided that the recommendations in this part of ISO 17201 are observed. The source energy of muzzle blast is typically measured or calculated for free-field conditions and often exhibits strong directivity. In many cases firearms are fired within a
26、shooting range which has structures such as firing sheds, walls or safety barriers. Guns, particularly shotguns, are sometimes fired in many directions, e.g. in trap and skeet where the shooting direction is dictated by the flight path of the clay target. This part of ISO 17201 recommends ways in wh
27、ich source data can be adapted for use with ISO 9613-2 to obtain a general survey for the sound exposure levels to be expected in the neighbourhood of shooting ranges. BS EN ISO 17201-3:2010BS EN ISO 17201-3:2010INTERNATIONAL STANDARD ISO 17201-3:2010(E) ISO 2010 All rights reserved 1Acoustics Noise
28、 from shooting ranges Part 3: Guidelines for sound propagation calculations 1 Scope This part of ISO 17201 specifies methods of predicting sound exposure levels of shooting sound for a single shot at a given reception point. Guidelines are given to calculate other acoustic indices from the sound exp
29、osure level. The prediction is based on the angular source energy distribution of the muzzle blast as defined in ISO 17201-1 or calculated using values from ISO 17201-2. This part of ISO 17201 applies to weapons with calibres of less than 20 mm or explosive charges of less than 50 g TNT equivalent,
30、at distances where peak pressures, including the contribution from projectile sound, are less than 1 kPa (154 dB). NOTE National or other regulations, which could be more stringent, can apply. 2 Normative references The following referenced documents are indispensable for the application of this doc
31、ument. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 9613-1, Acoustics Attenuation of sound during propagation outdoors Part 1: Calculation of the absorption of sound by the atmosphe
32、re ISO 9613-2:1996, Acoustics Attenuation of sound during propagation outdoors Part 2: General method of calculation ISO 17201-1:2005, Acoustics Noise from shooting ranges Part 1: Determination of muzzle blast by measurement ISO 17201-2, Acoustics Noise from shooting ranges Part 2: Estimation of muz
33、zle blast and projectile sound by calculation ISO 17201-4, Acoustics Noise from shooting ranges Part 4: Prediction of projectile sound ISO/IEC Guide 98-3, Uncertainty of measurement Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) IEC 61672-1, Electroacoustics Sound level met
34、ers Part 1: Specifications BS EN ISO 17201-3:2010ISO 17201-3:2010(E) 2 ISO 2010 All rights reserved3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 9613-2, ISO 17201-1 and the following apply. 3.1 substitute source substitute for a sound source and it
35、s firing shed by a model source without a firing shed positioned in the centre of the opening of the firing shed to represent the emission in the direction of a reception point 3.2 safety barrier shooting ranges barrier that is intended to stop projectiles leaving the range 3.3 safety baffle shootin
36、g ranges overhead barrier that is intended to stop projectiles leaving the range 3.4 firing shed structure constructed to protect the shooters and their equipment from precipitation and wind, having an opening that allows shooting at a target located on open ground 3.5 shooting range enclosed arrang
37、ement of firing positions and matching targets which, depending on the design, may include such features as a firing shed, safety barriers, safety baffles, and unsafe areas 3.6 shooting facility organizational entity consisting of one or more shooting ranges, and associated buildings and infrastruct
38、ure 3.7 firing position position of the shooter within a shooting range 3.8 matching target direction direction of the shooter to the position of a moving target accounting for the time delay of the shot hitting the target 3.9 maximum A-weighted and S-weighted sound pressure level Lp,AS,maxgreatest
39、A-weighted and S-weighted sound pressure level within a stated time interval NOTE 1 Maximum A-weighted and S-weighted sound pressure level is expressed in decibels. NOTE 2 A designates the frequency weighting and S the time weighting as specified in IEC 61672-1. NOTE 3 This definition is technically
40、 in accordance with ISO 1996-1:20031, 3.1.2. 3.10 maximum A-weighted and F-weighted sound pressure level Lp,AF,maxgreatest A-weighted and F-weighted sound pressure level within a stated time interval NOTE 1 Maximum A-weighted and F-weighted sound pressure level is expressed in decibels. NOTE 2 A des
41、ignates the frequency weighting and F the time weighting as specified in IEC 61672-1. NOTE 3 This definition is technically in accordance with ISO 1996-1:20031, 3.1.2. BS EN ISO 17201-3:2010ISO 17201-3:2010(E) ISO 2010 All rights reserved 33.11 maximum A-weighted and I-weighted sound pressure level
42、Lp,AI,maxgreatest A-weighted and I-weighted sound pressure level within a stated time interval NOTE 1 Maximum A-weighted and I-weighted sound pressure level is expressed in decibels. NOTE 2 A designates the frequency weighting and I the time weighting as specified in IEC 61672-1. 3.12 impact sound s
43、ound produced by the projectile hitting the target 3.13 diffraction point point on top of a barrier which provides the shortest pathlength for the sound travelling over the barrier to the reception point 4 Source modelling 4.1 Introduction The basic quantities to be used are the angular source energ
44、y distribution, Sq(), and the angular source energy distribution level, Lq(), as defined in ISO 17201-1. The angle between the line of fire and the line from the muzzle to the reception point is designated by . If the gun is fired in an open air situation, Sq() can be used to describe the muzzle bla
45、st. For rifle shots, projectile sound has to be included (see 4.3). Substitute sources can be used for shed situations and for the incorporation of reflection and diffraction to calculate the reception levels as if it was an open field situation. Impact sound caused by the projectile hitting the tar
46、get can usually be neglected. This part of ISO 17201 does not apply to projectiles containing a charge which is detonated at the target. 4.2 Muzzle blast 4.2.1 Background For the non-free-field situation (such as a shed with one opening), the propagation model of ISO 9613-2 is insufficient, and more
47、 complex propagation models and calculation procedures are needed. Annex A provides a benchmark case and a demonstration of how sophisticated sound propagation approximations (see Annex B) may be used to describe the sound emitted from such a range, based on the free-field data of the angular source
48、 energy distribution levels. The sound emission is then expressed by the angular source energy level distribution of a substitute source positioned at a representative position in front of or above the firing shed. All further calculations of the sound pressure level are carried out as specified in
49、Clause 5 by a point source with directivity independent of the range, which may be formed by a shed, baffles and side walls, etc. 4.2.2 Open field situation If the weapon under consideration is used outside a firing shed or similar structure, use the angular source energy distribution level Lq() of the specific weapon/ammunition combination directly. If a shot is fired with a reflecting surface near the shooter, take the reflection into account. The directivity has to be adjusted accordingly. If th
