BS EN ISO 17993-2002 Water quality - Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction《水质 使用液-液.pdf

上传人:吴艺期 文档编号:581414 上传时间:2018-12-15 格式:PDF 页数:32 大小:624.71KB
下载 相关 举报
BS EN ISO 17993-2002 Water quality - Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction《水质 使用液-液.pdf_第1页
第1页 / 共32页
BS EN ISO 17993-2002 Water quality - Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction《水质 使用液-液.pdf_第2页
第2页 / 共32页
BS EN ISO 17993-2002 Water quality - Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction《水质 使用液-液.pdf_第3页
第3页 / 共32页
BS EN ISO 17993-2002 Water quality - Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction《水质 使用液-液.pdf_第4页
第4页 / 共32页
BS EN ISO 17993-2002 Water quality - Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction《水质 使用液-液.pdf_第5页
第5页 / 共32页
亲,该文档总共32页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、BRITISH STANDARD BS EN ISO 17993:2003 BS 6068-2.79:2003 Incorporating Amendment No. 1 to BS ISO 17993:2002 (renumbers the BS ISO as BS EN ISO 17993: 2003) Water quality Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extract

2、ion The European Standard EN ISO 17993:2003 has the status of a British Standard ICS 13.060.50 BS EN ISO 17993:2003 This British Standard, having been prepared under the direction of the Health and Environment Sector Policy and Strategy Committee, was published under the authority of the Standards P

3、olicy and Strategy Committee on 17 September 2002 BSI 23 January 2004 ISBN 0 580 40357 2 National foreword This British Standard is the official English language version of EN ISO 17993:2003. It is identical with ISO 17993:2002. The UK participation in its preparation was entrusted by Technical Comm

4、ittee EH/3, Water quality, to Subcommittee EH/3/2, Physical, chemical and biochemical methods, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. This is one of a series of standards on water quality, others of which

5、 have been, or will be, published as Sections of BS 6068. The various Sections of BS 6068 are comprised within Parts 1 to 7, which, together with Part 0, are listed below. Part 0 Introduction Part 1 Glossary Part 2 Physical, chemical and biochemical methods Part 3 Radiological methods Part 4 Microbi

6、ological methods Part 5 Biological methods Part 6 Sampling Part 7 Precision and accuracy NOTE The tests described in this British Standard should only be carried out by suitably qualified persons with an appropriate level of chemical expertise. Standard chemical procedures should be followed through

7、out. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of Bri

8、tish Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; prese

9、nt to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an i

10、nside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii to v, a blank page, pages 1 to 20, the Annex ZA page and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication

11、 Amd. No. Date Comments 14911 23 January 2004 Implementation of the European StandardEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM ENISO17993 November2003 ICS13.060.50 Englishversion WaterqualityDeterminationof15polycyclicaromatic hydrocarbons(PAH)inwaterbyHPLCwithfluorescence detectionafterliquidl

12、iquidextraction(ISO17993:2002) QualitdeleauDosagede15hydrocarburesaromatiques polycycliques(HAP)dansleauparHPLCavecdtection parfluorescenceaprsextractionliquideliquide(ISO 17993:2002) WasserbeschaffenheitBestimmungvon15polycyclischen aromatischenKohlenwasserstoffen(PAK)inWasserdurch HPLCmitFluoresze

13、nzdetektionnachFlssigFlssig Extraktion(ISO17993:2002) ThisEuropeanStandardwasapprovedbyCENon3November2003. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliog

14、raphicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtot

15、heManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Hungary,Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Slovakia,Spain,Sweden,SwitzerlandandUn ited Kingdom. EUR

16、OPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2003CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.ENISO17993:2003EINESO71:3992003(E) 2 Foreword ThetextofISO17993

17、:2002hasbeenpreparedbyTechnicalCommitteeISO/TC147“Water quality”oftheInternationalOrganizationforStandardization(ISO)andhasbeentakenoveras ENISO17993:2003byTechnicalCommitteeCEN/TC230“Wateranalysis“,thesecretariatof whichisheldbyDIN. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eithe

18、rbypublicationof anidenticaltextorbyendorsement,atthelatestbyMay2004,andconflictingnationalstandards shallbewithdrawnatthelatestbyMay2004. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsof thefollowingcountriesareboundtoimplementthisEuropeanStandard:Austria,Belgium,Cze

19、ch Republic,Denmark,Finland,France,Germany,Greece,Hungary,Iceland,Ireland,Italy, Luxembourg,Malta,Netherlands,Norway,Portugal,Slovakia,Spain,Sweden,Switzerlandand theUnitedKingdom. Endorsementnotice ThetextofISO17993:2002hasbeenapprovedbyCENasENISO17993:2003withoutany modifications. NOTENormativeref

20、erencestoInternationalStandardsarelistedinAnnexZA(normative). ENISO17993:2003 Reference number ISO 17993:2002(E) OSI 2002INTERNATIONAL STANDARD ISO 17993 First edition 2002-08-15 Water quality Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection aft

21、er liquid-liquid extraction Qualit de leau Dosage de 15 hydrocarbures aromatiques polycycliques (HAP) dans leau par HPLC avec dtection par fluorescence aprs extraction liquide-liquide ENISO17993:2003IS:39971 O2002(E) DPlcsid Fremia ihTs PDF file mc yatnoaie nmt deddebyfepca.se Icca ncnadrow eitA heb

22、ods licsneilop gnic,y tihs file mirp eb yatniv ro deewb detu slahl ton ide ebtlnu desse tt ehyfepacse wihce era hml era deddebicsnede to i dnasntlalde t noeh comtupfrep remroign tide ehti.gn Iwod nnlidaogn tihs fil,e trapies ccatpe tiereht nsnopser ehiiblity fo ton ifnriignA gnebods licnesilop gnic.

23、y I ehTStneC Oarl Scerteiraat cacpets l oniibality it nihs .aera Ai ebods a tedarmfo kra Aebod SystemI snctaropro.de teDials fo ts ehfotworp eracudts ust dec ortaet eihs PDF filc eeb na fi dnuot nlareneG eh Ifnler otait evt of ehil;e tP ehD-Fcrtaeiarap nomtesre wretpo eimizf deirp rotni.gn Evyre csa

24、h era t neebkat nesne ot eruaht tf ehili es siutlbaf esu roI yb eSO memidob rebse. It neh lnuikletneve y ttah a lborpem leratign ti ot is fnuo,d lpsaee ifnrom ttneC ehlar Secrteirata at tsserdda eh igleb nevwo. ISO 2002 Athgir lls serevr.de selnUs towrehise specfi,dei trap on fo this ilbupctanoi may

25、 cudorper ebtu ro deziliyna ni de fomr yb ro nam y,snae lecetinorc m roecinahcal, inclidutohp gnocpoiym dna gnicrfoilm, wittuoh repmissii now nritif gnrom ietreh ISa Ot tserdda ehs lebwo I roSOs membre ydob it neh ctnuoo yrf ttseuqer eh.re ISO cirypothg fofice saCe tsopale 65 eneG 1121-HC 02 av leT.

26、 4 + 10 947 22 1 11 xaF0 947 22 14 + 9 74 E-mial coirypthgis.oc h Web ww.wiso.ch ii ISO 2002 Allr ithgsr esedevrENISO17993:2003IS:39971 O2002(E) I SO 2002 All irthgs ersedevr iiiContents Page Foreword iv Introduction. v 1 Scope 1 2 Normative references 1 3 Principle . 1 4 Interferences 3 5 Reagents

27、4 6 Apparatus. 5 7 Sampling 6 8 Procedure. 6 9 Calculation . 11 10 Precision 11 11 Test report 13 Annex A (informative) Examples of chromatographic conditions and columns . 14 Annex B (informative) Examples for the construction of special apparatus 18 ENISO17993:2003IS:39971 O2002(E) iv I SO 2002 Al

28、l irthgs ersedevrForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subj

29、ect for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IE

30、C) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committ

31、ees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO

32、 shall not be held responsible for identifying any or all such patent rights. ISO 17993 was prepared by Technical Committee ISO/TC 147, Water quality, Subcommittee SC 2, Physical, chemical and biochemical methods. Annexes A and B of this International Standard are for information only. ENISO17993:20

33、03IS:39971 O2002(E) I SO 2002 All irthgs ersedevr vIntroduction Polycyclic aromatic hydrocarbons (PAH) occur in nearly all types of waters. These compounds are adsorbed on solids (sediments, suspended matter) as well as dissolved in the liquid phase. Some PAH are known or suspected to cause cancer.

34、The Council Directive 98/83/EC on the quality of water intended for human consumption set the maximum acceptable level for benzo(a)pyrene at 0,010 g/l, and for the sum of four specified PAH benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(ghi)perylene, indeno(1,2,3-cd)- pyrene at 0,100 g/l. ENISO17

35、993:2003blank ENISO17993:2003INTENRATIONAL TSANDADR IS:39971 O2002(E)I SO 2002 All irthgs ersedevr 1Water quality Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction WARNING Some compounds being measured are presumed

36、to be carcinogenic. Acetonitrile and hexane are toxic. Persons using this International Standard should be familiar with normal laboratory practice. This International Standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the us

37、er to establish appropriate safety and health practices and to ensure compliance with any national regulatory conditions. 1 Scope This International Standard specifies a method using high performance liquid chromatography (HPLC) with fluorescence detection after liquid-liquid extraction for the dete

38、rmination of 15 selected PAH (see Table 1) in drinking and ground water in mass concentrations greater than 0,005 g/l (for each single compound) and surface waters in mass concentrations above 0,01 g/l. This method is, with some modification, also suitable for the analysis of wastewater. This method

39、 may be applicable to other PAH, provided the method is validated for each case. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or

40、 revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the

41、normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 5667-2, Water quality Sampling Part 2: Guidance on sampling techniques ISO 5667-3, Water quality Sampling Part 3: Guidance on the preservation and handling of samples ISO

42、 8466-1, Water quality Calibration and evaluation of analytical methods and estimation of performance characteristics Part 1: Statistical evaluation of the linear calibration function 3 Principle The PAH present in the aqueous sample are extracted from the water sample with hexane. The extract is co

43、ncentrated by evaporation and the residue taken up in a solvent appropriate for HPLC analysis. If necessary, extracts of surface water or more contaminated water samples are cleaned by chromatography over silica prior to analysis. PAH are separated by HPLC on a suitable stationary phase using gradie

44、nt elution. Identification and quantification is performed by means of fluorescence detection with wavelength programming for both the excitation and the emission wavelength. NOTE If only a limited number of PAH are to be determined, separation can also be performed under isocratic conditions. ENISO

45、17993:2003IS:39971 O2002(E) 2 I SO 2002 All irthgs ersedevrTable 1 Polycyclic aromatic hydrocarbons determinable by this method Name Chemical formula Molar mass Percentage carbon CAS-number Structure Naphthalene C 10 H 8128,17 g/mol 93,75 % C 091-20-3 Acenaphthene C 12 H 10154,21 g/mol 93,05 % C 083

46、-32-9 Phenanthrene C 14 H 10178,23 g/mol 94,05 % C 085-01-8 Fluoranthene C 16 H 10202,26 g/mol 95,0 % C 206-44-0 Benzo(a)anthracene C 18 H 12228,29 g/mol 94,45 % C 056-55-3 Benzo(b)fluorantheneaC 20 H 12252,32 g/mol 95,2 % C 205-99-2 Benzo(a)pyreneaC 20 H 12252,32 g/mol 95,2 % C 050-32-8 Dibenzo(a,h

47、)anthracene C 22 H 14278,35 g/mol 94,7 % C 053-70-3 Fluorene C 13 H 10166,22 g/mol 93,59 % C 086-73-7 Anthracene C 14 H 10178,23 g/mol 94,05 % C 120-12-7 Pyrene C 16 H 10202,26 g/mol 95,0 % C 129-00-0 ENISO17993:2003IS:39971 O2002(E) I SO 2002 All irthgs ersedevr 3Table 1 (continued) Name Chemical f

48、ormula Molar mass Percentage carbon CAS-number Structure Chrysene C 18 H 12228,29 g/mol 94,45 % C 218-01-9 Benzo(k)fluorantheneaC 20 H 12252,32 g/mol 95,2 % C 207-08-9 Indeno(1,2,3-cd)pyreneaC 22 H 12276,34 g/mol 95,6 % C 193-39-5 Benzo(ghi)peryleneaC 22 H 12276,34 g/mol 95,6 % C 191-24-2 NOTE The 15 PAH selected fo

展开阅读全文
相关资源
  • BS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdfBS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdf
  • BS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdfBS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdf
  • BS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdfBS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdf
  • BS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdfBS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdf
  • BS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdfBS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdf
  • BS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdfBS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdf
  • BS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdfBS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdf
  • BS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdfBS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdf
  • BS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdfBS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdf
  • BS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdfBS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdf
  • 猜你喜欢
  • ASTM D6971-2004 Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry《用线性扫描伏安法测量无锌涡轮.pdf ASTM D6971-2004 Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry《用线性扫描伏安法测量无锌涡轮.pdf
  • ASTM D6971-2009 431 Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry《用线性扫描伏安法测量.pdf ASTM D6971-2009 431 Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry《用线性扫描伏安法测量.pdf
  • ASTM D6971-2009(2014) 6602 Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry《用线性.pdf ASTM D6971-2009(2014) 6602 Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry《用线性.pdf
  • ASTM D6973-2005 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump《高压定容叶轮泵中石油液压液磨损特性指示的标准试验方法》.pdf ASTM D6973-2005 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump《高压定容叶轮泵中石油液压液磨损特性指示的标准试验方法》.pdf
  • ASTM D6973-2008 723 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump.pdf ASTM D6973-2008 723 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump.pdf
  • ASTM D6973-2008e1 809 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump《高压定容叶轮泵中石油液压液磨损特性指示的标准试验方法.pdf ASTM D6973-2008e1 809 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump《高压定容叶轮泵中石油液压液磨损特性指示的标准试验方法.pdf
  • ASTM D6973-2014 0890 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump《高压定容叶轮泵中石油液压液磨损特性指示的标准试验方法》.pdf ASTM D6973-2014 0890 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump《高压定容叶轮泵中石油液压液磨损特性指示的标准试验方法》.pdf
  • ASTM D6974-2004 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels&8212 Filtration and Culture Procedures《液体燃料中存活细菌和真菌计数的标准实施规范 过滤和培养过程》.pdf ASTM D6974-2004 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels&8212 Filtration and Culture Procedures《液体燃料中存活细菌和真菌计数的标准实施规范 过滤和培养过程》.pdf
  • ASTM D6974-2009 431 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels&8212 Filtration and Culture Procedures《液体燃料中能活细菌和真菌计数的实施规程 过滤和培养程序》.pdf ASTM D6974-2009 431 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels&8212 Filtration and Culture Procedures《液体燃料中能活细菌和真菌计数的实施规程 过滤和培养程序》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > BS

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1