1、BS EN ISO 20361:2015Liquid pumps and pump units Noise test code Grades 2and 3 of accuracyBS EN ISO 20361:2015Incorporating corrigendum April 2017(ISO 20361:2015)BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN ISO 20361:2015 BRITISH STANDARDNational forewordThis
2、 British Standard is the UK implementation of EN ISO 20361:2015. It supersedes BS EN ISO 20361:2009 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee MCE/6, Pumps and pump testing.A list of organizations represented on this committee can be obtained on r
3、equest to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017. Published by BSI Standards Limited 2017ISBN 978 0 580 97682 7ICS 17.140.20; 23.080Compliance wit
4、h a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2015.Amendments/corrigenda issued since publicationDate Text affected30 April 2017 Implementation of CEN correction not
5、ice 22 July 2015: Annex ZA updatedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 20361 June 2015 ICS 17.140.20; 23.080 Supersedes EN ISO 20361:2009English Version Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2015) Pompes et groupes motopompes pour l
6、iquides - Code dessai acoustique - Classes de prcision 2 et 3 (ISO 20361:2015) This European Standard was approved by CEN on 17 April 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a natio
7、nal standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A vers
8、ion in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, C
9、zech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
10、 EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 20361:2
11、015 EBS EN ISO 20361:2015EN ISO 20361:2015 (E) 3 Foreword This document (EN ISO 20361:2015) has been prepared by Technical Committee ISO/TC 115 “Pumps” incollaboration with Technical Committee CEN/TC 197 “Pumps” the secretariat of which is held by AFNOR. This European Standard shall be given the sta
12、tus of a national standard, either by publication of an identicaltext or by endorsement, at the latest by December 2015, and conflicting national standards shall be withdrawnat the latest by December 2015. Attention is drawn to the possibility that some of the elements of this document may be the su
13、bject of patentrights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 20361:2009. This document has been prepared under a mandate given to CEN by the European Commission and theEuropean Free Trade Association, and suppo
14、rts essential requirements of EU Directive. For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European
15、 Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, CzechRepublic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia,
16、Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 20361:2015 has been approved by CEN as EN ISO 20361:2015 without any modification. BS EN ISO 20361:2015EN ISO 20361:2015 (E) 4 Annex ZA (informative) Relationship between this European Standard and the Esse
17、ntialRequirements of EU Directive 2006/42/EC This European Standard has been prepared under a mandate given to CEN by the European Commissionand the European Free Trade Association to provide a means of conforming to Essential Requirements of theNew Approach Directive 2006/42/EC on machinery. Once t
18、his standard is cited in the Official Journal of the European Union under that Directive and has beenimplemented as a national standard in at least one Member State, compliance with the clauses of thisstandard confers, within the limits of the scope of this standard, a presumption of conformity with
19、 thecorresponding Essential Requirements of that Directive (EHSR 1.7.4.2 u) and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the product(s) falling withinthe scope of this standard. BS EN ISO 20361:2015EN ISO 20361:2015 (E) 3 Foreword This docu
20、ment (EN ISO 20361:2015) has been prepared by Technical Committee ISO/TC 115 “Pumps” incollaboration with Technical Committee CEN/TC 197 “Pumps” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identicalte
21、xt or by endorsement, at the latest by December 2015, and conflicting national standards shall be withdrawnat the latest by December 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patentrights. CEN and/or CENELEC shall not be held respons
22、ible for identifying any or all such patent rights. This document supersedes EN ISO 20361:2009. This document has been prepared under a mandate given to CEN by the European Commission and theEuropean Free Trade Association, and supports essential requirements of EU Directive. For relationship with E
23、U Directive, see informative Annex ZA, which is an integral part of this document. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, CzechRepubl
24、ic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsem
25、ent notice The text of ISO 20361:2015 has been approved by CEN as EN ISO 20361:2015 without any modification. BS EN ISO 20361:2015EN ISO 20361:2015 (E) 4 Annex ZA (informative) Relationship between this European Standard and the EssentialRequirements of EU Directive 2006/42/EC This European Standard
26、 has been prepared under a mandate given to CEN by the European Commissionand the European Free Trade Association to provide a means of conforming to Essential Requirements of theNew Approach Directive 2006/42/EC on machinery. Once this standard is cited in the Official Journal of the European Union
27、 under that Directive and has beenimplemented as a national standard in at least one Member State, compliance with the clauses of thisstandard confers, within the limits of the scope of this standard, a presumption of conformity with thecorresponding Essential Requirements of that Directive (EHSR 1.
28、7.4.2 u) and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the product(s) falling withinthe scope of this standard. Once this standard is cited in the Official Journal of the European Union under that Directive and has been implemented as a nati
29、onal standard in at least one Member State, compliance with the normative clauses of this European standard confers, within the limits of the scope of this standard, a presumption of conformity with the corresponding Essential Requirements of that Directive (EHSR 1.7.4.2 u) and associated EFT regula
30、tions.BS EN ISO 20361:2015ISO 20361:2015(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 24 Pump family and pump configuration . 25 Sound power level determination 25.1 General . 25.2 Specific considerations for reference box, measurement surface, position of
31、microphones, and intensity probe . 45.2.1 General 45.2.2 Reference box . 45.2.3 Measurement surface and microphone positions . 65.2.4 Position of microphones and intensity probes .106 Emission sound pressure level determination 106.1 Basic standard to be used . 106.2 Relevant work station 106.3 Meas
32、urement uncertainty 107 Installation and mounting conditions .117.1 General 117.2 Noise test situation . 117.2.1 General. 117.2.2 Test on site . 117.2.3 Test on shop test stand 117.2.4 Test on a specific facility intended for acoustic measurement .118 Operating conditions during noise measurement .1
33、28.1 General 128.2 Pumped liquid 128.3 NPSHA value . 129 Information to be recorded 129.1 General 129.2 Test report 1210 Declaration and verification of noise emission values 13Annex A (normative) Pump alone Measurement surface 14Annex B (normative) Pump units Microphone positions for sound pressure
34、 level measurement on the measurement surface for different pump types and sizes 15Bibliography .22 ISO 2015 All rights reserved iiiContents PageBS EN ISO 20361:2015ISO 20361:2015(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodie
35、s (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations,
36、 governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further ma
37、intenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). A
38、ttention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduc
39、tion and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conf
40、ormity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 115, Pumps.This second edition cancels and replaces the first
41、 edition (ISO 20361:2007), which has been technically revised.iv ISO 2015 All rights reservedBS EN ISO 20361:2015ISO 20361:2015(E)IntroductionThe noise emitted by a pump unit can be radiated by the casing of the pump, the driving system (e.g. motor, gear box, coupling), the piping system, and all th
42、e connected structures.On site, the perceived noise can be significantly increased by reverberation effects or by the radiation of extraneous sources.Depending on the type of pump it can be useful to know the following:a) the noise of the pumping system (including piping);b) the noise of the pump un
43、it, including the driver and the transmission elements but excluding the noise of the piping system;c) the noise emitted by the pump alone, excluding the noise from the driver, transmission elements, and the piping;d) the noise emitted by each of those elements in respect to a given requirement or i
44、n view of an efficient sound proofing of the installation.This International Standard describes methods for the determination of the noise emitted by a pump unit case b) or a pump alone case c). Noise emission is expressed in terms of the sound power level of the machine and the emission sound press
45、ure level at the relevant work station (see 6.2).This International Standard is intended to enable the manufacturer to show the effectiveness of noise reduction, and declare the noise emission levels.This International Standard is a type C standard as stated in ISO 12100-1 and ISO 12100-2.When provi
46、sions of this type C standard are different from those which are stated in A or B standards, the provisions of this type C standard take precedence.The machinery concerned and the extent to which noise is covered are indicated in the scope of this International Standard. ISO 2015 All rights reserved
47、 vBS EN ISO 20361:2015ISO 20361:2015(E)BS EN ISO 20361:2015Liquid pumps and pump units Noise test code Grades 2 and 3 of accuracy1 ScopeThis International Standard specifies all the information necessary to carry out efficiently and under standardized conditions the determination, declaration, and v
48、erification of the airborne noise emission of liquid pumps or pump units (see 4.1). It specifies the noise measurement methods and the operating and mounting conditions that shall be used for the test.Noise emission characteristics include emission sound pressure levels at specified positions and th
49、e sound power level. The determination of these quantities is necessary for declaring the noise emission values, and purpose of noise control at source at the design stage.The determination of these quantities is also necessary for comparing the noise emitted by liquid pumps on the market.The use of this International Standard ensures the reproducibility of the determination of the airborne noise-emission characteristics within specified limits determined by the grade of accuracy of the basic airborne noise measurement method used. Noise me
