1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 7719:2012Prevailing torque type all-metal hexagon regular nuts Property classes 5, 8 and 10 Copyright European Committee for Standardization Provided by IHS under licen
2、se with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 7719:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 7719:2012.It supersedes BS EN ISO 7719:1998 which is withdrawn.The UK participation in its prepa
3、ration was entrusted to TechnicalCommittee FME/9, Fasteners.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The B
4、ritish Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 77984 8ICS 21.060.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 Janu
5、ary 2013.Amendments issued since publicationDate Text affectedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 7719 Decemb
6、er 2012 ICS 21.060.20 Supersedes EN ISO 7719:1997English Version Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 (ISO 7719:2012) crous hexagonaux normaux autofreins tout mtal - Classes de qualit 5, 8 et 10 (ISO 7719:2012) Sechskantmuttern mit Klemmteil (Ganzmetal
7、lmuttern), Typ 1 - Festigkeitsklassen 5, 8 und 10 (ISO 7719:2012) This European Standard was approved by CEN on 3 December 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standar
8、d without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any
9、other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republ
10、ic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN C
11、OMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 7719:2012: ECopyright European
12、 Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 7719:2012EN ISO 7719:2012 (E) 3 Foreword This document (EN ISO 7719:2012) has been prepared by Technical Committee ISO/TC 2 “Fasteners“ in
13、 collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2013, and conflicting national standard
14、s shall be withdrawn at the latest by June 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 7719:
15、1997. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, Franc
16、e, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 7719:2012 has been approved by CEN as a EN ISO
17、 7719:2012 without any modification. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 7719:2012ISO 7719:2012(E) ISO 2012 All rights reserved iiiContents PageForeword iv1
18、 Scope 12 Normative references . 13 Dimensions . 14 Requirements and reference International Standards 35 Designation . 3Bibliography . 4Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from I
19、HS-,-,-BS EN ISO 7719:2012ISO 7719:2012(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member b
20、ody interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electro
21、technical Commission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standards adopted by
22、 the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent righ
23、ts. ISO shall not be held responsible for identifying any or all such patent rights.ISO 7719 was prepared by Technical Committee ISO/TC 2, Fasteners, Subcommittee SC 12, Fasteners with metric internal thread.This third edition cancels and replaces the second edition (ISO 7719:1997), of which it cons
24、titutes a minor revision.iv ISO 2012 All rights reservedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 7719:2012INTERNATIONAL STANDARD ISO 7719:2012(E)Prevailing torqu
25、e type all-metal hexagon regular nuts Property classes 5, 8 and 101 ScopeThis International Standard specifies the characteristics of prevailing torque type all-metal hexagon regular nuts, with threads from M5 up to and including M36, in product grade A for threads up to and including M16 and produc
26、t grade B for threads above M16, and with property classes 5, 8 and 10.NOTE The dimensions of the nuts with the exception of hmaxcorrespond to those given in ISO 4032.If other specifications are required, they can be selected from existing International Standards, for example ISO 261, ISO 724, ISO 8
27、98-2, ISO 965-2, ISO 2320 and ISO 4759-1.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable to its application. For undated references, the latest edition of the referenced document (including any amendments) applies.
28、ISO 225, Fasteners Bolts, screws, studs and nuts Symbols and descriptions of dimensionsISO 261, ISO general purpose metric screw threads General planISO 724, ISO general-purpose metric screw threads Basic dimensionsISO 898-2, Mechanical properties of fasteners made of carbon steel and alloy steel Pa
29、rt 2: Nuts with specified property classes Coarse thread and fine pitch threadISO 965-2, ISO general purpose metric screw threads Tolerances Part 2: Limits of sizes for general purpose external and internal screw threads Medium qualityISO 2320, Prevailing torque type steel nuts Mechanical and perfor
30、mance propertiesISO 3269, Fasteners Acceptance inspectionISO 4042, Fasteners Electroplated coatingsISO 4759-1, Tolerances for fasteners Part 1: Bolts, screws, studs and nuts Product grades A, B and CISO 6157-2, Fasteners Surface discontinuities Part 2: NutsISO 8992, Fasteners General requirements fo
31、r bolts, screws, studs and nutsISO 10683, Fasteners Non-electrolytically applied zinc flake coatings3 DimensionsSee Figure 1 and Table 1.Symbols and descriptions of dimensions are specified in ISO 225. ISO 2012 All rights reserved 1Copyright European Committee for Standardization Provided by IHS und
32、er license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 7719:2012ISO 7719:2012(E)aPrevailing torque element, shape at the discretion of the manufacturer.b = 15 to 30.c = 90 to 120.Figure 1Table 1 DimensionsDimensions in millimetresFiletage DM5
33、M6 M8 M10 M12 (M14)aM16 (M18)aM20a(M22)aM24 M30 M36Pb0,8 1 1,25 1,5 1,75 2 2 2,5 2,5 2,5 3 3,5 4damax. 5,75 6,75 8,75 10,80 13,00 15,10 17,30 19,50 21,60 23,70 25,90 32,40 38,90min. 5,00 6,00 8,00 10,00 12,00 14,00 16,00 18,00 20,00 22,00 24,00 30,00 36,00dwmin. 6,88 8,88 11,63 14,63 16,63 19,64 22,
34、49 24,90 27,70 31,40 33,25 42,75 51,11e min. 8,79 11,05 14,38 17,77 20,03 23,36 26,75 29,56 32,95 37,29 39,55 50,85 60,79hmax. 5,30 5,90 7,10 9,00 11,60 13,20 15,20 17,00 19,00 21,00 23,00 26,90 32,50min. 4,80 5,40 6,44 8,04 10,37 12,10 14,10 15,10 16,90 18,10 20,20 24,30 29,40mwmin. 3,52 3,92 5,15
35、6,43 8,30 9,68 11,28 12,08 13,52 14,50 16,16 19,44 23,52smax. 8,00 10,00 13,00 16,00 18,00 21,00 24,00 27,00 30,00 34,00 36,00 46,00 55,00min. 7,78 9,78 12,73 15,73 17,73 20,67 23,67 26,16 29,16 33,00 35,00 45,00 53,80aThe size in parentheses should be avoided, if possible.bP is the pitch of the thr
36、ead.2 ISO 2012 All rights reservedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 7719:2012ISO 7719:2012(E)4 Requirements and reference International StandardsSee Table
37、 2.Table 2 Requirements and reference International StandardsMaterial SteelGeneral requirements International StandardISO 8992Thread Tolerance class 6HInternational StandardsISO 261, ISO 724, ISO 965-2Mechanical and performance propertiesProperty class 5, 8, 10International StandardsISO 898-2, ISO 2
38、320Tolerance Product grade For D M16: AFor D M16: BInternational StandardISO 4759-1Finish CoatingAs processedRequirements for electroplating are specified in ISO 4042.Requirements for non-electrolytically applied zinc flake coatings are specified in ISO 10683.Additional requirements or other finishe
39、s or coatings shall be agreed between the supplier and the purchaser.Surface integrityLimits for surface discontinuities are specified in ISO 6157-2.Acceptability Acceptance inspection is specified in ISO 3269.5 DesignationEXAMPLE A prevailing torque type all-metal hexagon regular nut, with thread M
40、12 and property class 8 is designated as follows:Prevailing torque type hexagon regular nut ISO 7719 - M12 - 8 ISO 2012 All rights reserved 3Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license fr
41、om IHS-,-,-BS EN ISO 7719:2012ISO 7719:2012(E)Bibliography1 ISO 4032, Hexagon regular nuts (style 1) Product grades A and B 4 ISO 2012 All rights reservedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted witho
42、ut license from IHS-,-,-BS EN ISO 7719:2012Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-This page deliberately left blankCopyright European Committee for Standardization Provi
43、ded by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-This page deliberately left blankCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without li
44、cense from IHS-,-,-BSI is the independent national body responsible for preparing British Standards and other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. BSI is incorporated by Royal Charter. British Standar
45、ds and other standardisation products are published by BSI Standards Limited.British Standards Institution (BSI)raising standards worldwideBSI389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards and PASs are periodically updated by amendment or revision. Users
46、of British Standards and PASs should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using British Standards would inform the Secre
47、tary of the technical committee responsible, the identity of which can be found on the inside frontcover. Similary for PASs, please notify BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers BSI Subscribing Members an individual updating service called PLUS which ensure
48、s that subscribers automatically receive the latest editions of British Standards and PASs.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards
