1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 9614-1:2009Acoustics Determination ofsound power levels of noisesources using sound intensityPart 1: Measurement at discrete points (ISO9614-1:1993)Licensed Copy: Wang
2、Bin, ISO/EXCHANGE CHINA STANDARDS, 10/11/2010 01:41, Uncontrolled Copy, (c) BSIBS EN ISO 9614-1:2009 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO9614-1:2009. It is identical to ISO 9614-1:1993. It supersedes BS ENISO 9614-1:1995 which is withdrawn.The UK
3、participation in its preparation was entrusted to TechnicalCommittee EH/1/4, Machinery noise.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible
4、for its correctapplication. BSI 2010ISBN 978 0 580 67422 8ICS 17.140.01Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 August 2010Amendments issued since public
5、ationDate Text affectedLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/11/2010 01:41, Uncontrolled Copy, (c) BSIEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 9614-1August 2009ICS 17.140.01 Supersedes EN ISO 9614-1:1995 English VersionAcoustics - Determination of sound power levels
6、of noisesources using sound intensity - Part 1: Measurement at discretepoints (ISO 9614-1:1993)Acoustique - Dtermination par intensimtrie des niveauxde puissance acoustique mis par les sources de bruit -Partie 1: Mesurages par points (ISO 9614-1:1993)Akustik - Bestimmung der Schalleistungspegel vonS
7、challquellen aus Schallintensittsmessungen - Teil 1:Messungen an diskreten Punkten (ISO 9614-1:1993)This European Standard was approved by CEN on 20 July 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the
8、 status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German)
9、. A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republi
10、c, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMAL
11、ISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 9614-1:2009: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/11/2010 01:41,
12、 Uncontrolled Copy, (c) BSIBS EN ISO 9614-1:2009EN ISO 9614-1:2009 (E) 3 Foreword The text of ISO 9614-1:1993 has been prepared by Technical Committee ISO/TC 43 “Acoustics” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 9614-1:2009 by Technical Committe
13、e CEN/TC 211 “Acoustics” the secretariat of which is held by DS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2010, and conflicting national standards shall be withdrawn at the latest
14、by February 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 9614-1:1995. This document has been
15、prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directives. For relationship with EC Directives, see informative Annexes ZA and ZB, which are integral parts of this document. According to the CEN/CENE
16、LEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxemb
17、ourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 9614-1:1993 has been approved by CEN as a EN ISO 9614-1:2009 without any modification. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA ST
18、ANDARDS, 10/11/2010 01:41, Uncontrolled Copy, (c) BSIBS EN ISO 9614-1:2009EN ISO 9614-1:2009 (E) 4 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC This European Standard has been prepared under a mandate given to CEN by the E
19、uropean Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the New Approach Directive 98/37/EC, amended by 98/79/EC on machinery. Once this standard is cited in the Official Journal of the European Communities under that Directive and has
20、 been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive and associated EFTA regulatio
21、ns. WARNING - Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/11/2010 01:41, Uncontrolled Copy, (c) BSIBS EN ISO 9614-1:2009EN ISO 9614-1:2009 (E) 5 Annex ZB (informati
22、ve) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a means of conforming to Essential Requirement
23、s of the New Approach Directive 2006/42/EC on machinery. Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers,
24、within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard. L
25、icensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/11/2010 01:41, Uncontrolled Copy, (c) BSIBS EN ISO 9614-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/11/2010 01:41, Uncontrolled Copy, (c) BSIBS EN ISO 9614-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/11/
26、2010 01:41, Uncontrolled Copy, (c) BSIBS EN ISO 9614-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/11/2010 01:41, Uncontrolled Copy, (c) BSIBS EN ISO 9614-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/11/2010 01:41, Uncontrolled Copy, (c) BSIBS EN ISO 9614-1:2009L
27、icensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/11/2010 01:41, Uncontrolled Copy, (c) BSIBS EN ISO 9614-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/11/2010 01:41, Uncontrolled Copy, (c) BSIBS EN ISO 9614-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/11/
28、2010 01:41, Uncontrolled Copy, (c) BSIBS EN ISO 9614-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/11/2010 01:41, Uncontrolled Copy, (c) BSIBS EN ISO 9614-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/11/2010 01:41, Uncontrolled Copy, (c) BSIBS EN ISO 9614-1:2009L
29、icensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/11/2010 01:41, Uncontrolled Copy, (c) BSIBS EN ISO 9614-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/11/2010 01:41, Uncontrolled Copy, (c) BSIBS EN ISO 9614-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/11/
30、2010 01:41, Uncontrolled Copy, (c) BSIBS EN ISO 9614-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/11/2010 01:41, Uncontrolled Copy, (c) BSIBS EN ISO 9614-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/11/2010 01:41, Uncontrolled Copy, (c) BSIBS EN ISO 9614-1:2009L
31、icensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/11/2010 01:41, Uncontrolled Copy, (c) BSIBS EN ISO 9614-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/11/2010 01:41, Uncontrolled Copy, (c) BSIBS EN ISO 9614-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/11/
32、2010 01:41, Uncontrolled Copy, (c) BSIBS EN ISO 9614-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/11/2010 01:41, Uncontrolled Copy, (c) BSIBS EN ISO 9614-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/11/2010 01:41, Uncontrolled Copy, (c) BSIBS EN ISO 9614-1:2009L
33、icensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/11/2010 01:41, Uncontrolled Copy, (c) BSIBS EN ISO 9614-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/11/2010 01:41, Uncontrolled Copy, (c) BSIBS EN ISO 9614-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/11/2010 01:41, Uncontrolled Copy, (c) BSIBS EN ISO 9614-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/11/2010 01:41, Uncontrolled Copy, (c) BSIBS EN ISO 9614-1:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/11/2010 01:41, Uncontrolled Copy, (c) BSI
