1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO/IEC 15423:2010Information technology Automatic identification and data capture techniques Bar code scanner and decoder performance testing (ISO/IEC 15423:2009)Incorpora
2、ting corrigendumMarch 2011BS EN ISO/IEC 15423:2010 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO/IEC 15423:2010. It is identical to ISO/IEC 15423:2009. It supersedes BS EN ISO/IEC 15423:2005, which is withdrawn.The UK participation in its preparation was e
3、ntrusted to TechnicalCommittee IST/34, Automatic identification and data capture techniques.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible f
4、or its correctapplication. BSI 2011 ISBN 978 0 580 73173 0 ICS 35.040 Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 September 2010. Amendments/corrigenda issu
5、ed since publicationDate Text affected 31 March 2011 Correction to identifier and national committee reference in the national forewordEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO/IEC 15423 September 2010 ICS 35.040 Supersedes EN ISO/IEC 15423:2005English Version Information technology -
6、 Automatic identification and data capture techniques - Bar code scanner and decoder performance testing (ISO/IEC 15423:2009) Technologies de linformation - Techniques automatiques didentification et de capture des donnes - Contrle de scanner de code barres et de performance du dcodeur (ISO/IEC 1542
7、3:2009) Informationstechnik - Automatische Identifikation und Datenerfassungsverfahren - Leistungsanforderungen an Strichcode-Scanner und -Decoder (ISO/IEC 15423:2009) This European Standard was approved by CEN on 12 August 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulati
8、ons which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This Eur
9、opean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the n
10、ational standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Swit
11、zerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No.
12、 EN ISO 15423:2010: E3 Foreword The text of ISO/IEC 15423:2009 has been prepared by Technical Committee ISO/IEC/JTC 1 “Information technology” of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC) and has been taken over as EN ISO/IEC 154
13、23:2010 by Technical Committee CEN/TC 225 “AIDC technologies” the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2011, and conflicting national standard
14、s shall be withdrawn at the latest by March 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO/IEC
15、15423:2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Icel
16、and, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO/IEC 15423:2009 has been approved by CEN as a EN ISO/IEC 15423:2010 without any modifica
17、tion. BS EN ISO/IEC 15423:2010EN ISO/IEC 15423:2010 (E) ISO/IEC 2011 All rights reserved iiiContents Page Foreword iv Introduction.v 1 Scope1 2 Normative references1 3 Terms and definitions .2 4 Abbreviated terms .5 5 Categories of scanning equipment .5 5.1 Scanners with single-axis reading diagram
18、.6 5.2 Scanners with two-axis reading diagram6 5.3 Scanners with three-axis reading diagram.6 6 Test requirements .6 6.1 Test methods .6 6.2 Selection of equipment for testing 7 6.3 Test conditions 7 6.4 Test charts .7 6.5 Test equipment 15 6.6 Test criteria 15 6.7 Parameters to be tested and test m
19、ethods.16 6.8 Test report26 7 Certification and labelling.26 8 Equipment specification.27 8.1 General .27 8.2 Scanner/decoder interface .28 8.3 Human interface 28 8.4 Computer interface28 8.5 Digital input and output (I/O)29 8.6 Programming and configuration29 Annex A (normative) General operational
20、 requirements30 Annex B (informative) Classification of scanners .31 Annex C (informative) Example of decodability calculation.37 Bibliography39 BS EN ISO/IEC 15423:2010EN ISO/IEC 15423:2010 (E)iv ISO/IEC 2011 All rights reservedForeword ISO (the International Organization for Standardization) and I
21、EC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with
22、particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have
23、established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint t
24、echnical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. IS
25、O and IEC shall not be held responsible for identifying any or all such patent rights. ISO/IEC 15423 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 31, Automatic identification and data capture techniques. This second edition cancels and replaces the
26、 first edition (ISO/IEC 15423:2004), which has been technically revised. BS EN ISO/IEC 15423:2010EN ISO/IEC 15423:2010 (E) ISO/IEC 2011 All rights reserved vIntroduction The technology of bar coding is based on the recognition of patterns encoded in bars and spaces of defined dimensions or arrangeme
27、nts of marks in matrix patterns both of which are constructed according to rules defining the translation of characters into such patterns, known as the symbology specification. Bar code symbols can be produced with a wide variety of printing and other techniques, and the overall symbol dimensions c
28、an be uniformly scaled to suit particular requirements. There is a wide range of bar code reading equipment using various scanning techniques, which enable bar code symbols to be read under many different conditions. Bar code symbols may be a) “linear” i.e. read in a single dimension, where the heig
29、ht of the bars provides redundancy of information, or b) “two dimensional”, either in stacked rows to be read unidimensionally with multiple scans, or as a matrix of elements requiring two dimensional reading. Bar code reading equipment must be capable of reliably converting the information represen
30、ted as a bar code symbol into a form meaningful to the host computer system or otherwise to the user. Manufacturers of bar code equipment, the producers of bar code symbols and the users of bar code technology require publicly available standard test specifications for bar code reading equipment to
31、ensure the accuracy and consistency of performance of this equipment. BS EN ISO/IEC 15423:2010EN ISO/IEC 15423:2010 (E)INTERNATIONAL STANDARD ISO/IEC 2011 All rights reserved 1Information technology Automatic identification and data capture techniques Bar code scanner and decoder performance testing
32、 1 Scope This International Standard defines the test equipment and procedures to be used to determine the performance of bar code scanning and decoding equipment. It deals with bar code scanning and decoding equipment both as integrated reading systems and as discrete units. It defines performance
33、of the equipment in a particular configuration (e.g. a specific model) irrespective of the individual components used. It also defines in a normative annex operational parameters for the test equipment, and describes, in an informative annex, a means of classifying scanners. 2 Normative references T
34、he following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 15415, Information technology Automatic id
35、entification and data capture techniques Bar code print quality test specification Two-dimensional symbols ISO/IEC 15416, Information technology Automatic identification and data capture techniques Bar code print quality test specification Linear symbols ISO/IEC 15417, Information technology Automat
36、ic identification and data capture techniques Code 128 bar code symbology specification ISO/IEC 15424, Information technology Automatic identification and data capture techniques Data Carrier Identifiers (including Symbology Identifiers) ISO/IEC 15426-1, Information technology Automatic identificati
37、on and data capture techniques Bar code verifier conformance specifications Part 1: Linear symbols ISO/IEC 15426-2, Information technology Automatic identification and data capture techniques Bar code verifier conformance specification Part 2: Two-dimensional symbols ISO/IEC 15438 Information techno
38、logy Automatic identification and data capture techniques PDF417 bar code symbology specification ISO/IEC 16022 Information technology Automatic identification and data capture techniques Data Matrix bar code symbology specification ISO/IEC 16388, Information technology Automatic identification and
39、data capture techniques Code 39 bar code symbology specification ISO/IEC 19762-1, Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 1: General terms relating to AIDC EN ISO/IEC 15423:2010 (E)BS EN ISO/IEC 15423:20102 ISO/IEC 2011 All rights
40、 reservedISO/IEC 19762-2, Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 2: Optically readable media (ORM) ISO/IEC 24723, Information technology Automatic identification and data capture techniques EAN.UCC Composite bar code symbology sp
41、ecification ISO/IEC 24724, Information technology Automatic identification and data capture techniques Reduced Space Symbology (RSS) bar code symbology specification 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO/IEC 19762 and the following apply. 3
42、.1 contact scanner particular type of scanner in which the scanning action takes place with the scanner in actual or near contact with the symbol, e.g. wand or light pen 3.2 decode redundancy acquisition of a predetermined number of identical decodes before acceptance by a decoder of a valid decode
43、EXAMPLE Decode redundancy of 2 requires two identical decodes. 3.3 exit window datum point from which the reading diagram is measured, positioned on the beam midpoint and closest to the reading end of the scanner 3.4 maximum reading distance distance from the exit window to the end of the depth of f
44、ield NOTE See R in Figure 2. 3.5 minimum reading distance distance from the exit window to the beginning of the depth of field NOTE See A in Figure 2. 3.6 raster distance distance between the two most widely spaced adjacent scan lines projected on a plane at a defined distance from the scanner exit
45、window NOTE See E in Figure B.3. 3.7 raster width distance between the two outermost scan lines projected on a plane at a defined distance from the scanner exit window NOTE This covers a reading field which depends on the construction of the scanner and on the reading distance. See D in Figure B.3.
46、BS EN ISO/IEC 15423:2010EN ISO/IEC 15423:2010 (E) ISO/IEC 2011 All rights reserved 33.8 reading angle angular rotation of a symbol in an axis relative to a scan line NOTE Three different reading angles, tilt, skew and pitch are illustrated in Figure 1. Tilt refers to rotation around the z axis, skew
47、 to rotation around the x axis and pitch to rotation around the y axis. tilt skew pitch Figure 1 Reading angles 3.9 reading diagram graphical representation of the reading zone for a specific X dimension (or other parameters) of the bar code symbol NOTE The parameters of the reading diagram are: mea
48、surements made from the exit window of the reader; reading distance, measured on the z axis; X dimension (in mm); skew, tilt and pitch angles; symbol contrast value; ambient light level; and symbology. See Annex B. 3.10 reading zone whole region (line, area or volume) in front of the exit window of
49、a non-contact scanner in which defined symbols can be read NOTE See zone MNOP in Figure 2. X Axis Y Axis Z Axis BS EN ISO/IEC 15423:2010EN ISO/IEC 15423:2010 (E)4 ISO/IEC 2011 All rights reservedC Scanner Reading zone Two-axis BN O M P AR Figure 2 Example of reading zone (MNOP) NOTE Certain application requirements, for example in automated conveyor scanning systems, may restrict the effective reading zone to that shown in Figure 3 (MNOP). CScannerR
