1、BSI Standards Publication3D Display devicesPart 12-1: Measuring methods forstereoscopic displays usingglasses - OpticalBS IEC 62629-12-1:2014National forewordThis British Standard is the UK implementation of IEC 62629-12-1:2014.The UK participation in its preparation was entrusted to TechnicalCommit
2、tee EPL/47, Semiconductors.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 201
3、4.Published by BSI Standards Limited 2014ISBN 978 0 580 79808 5ICS 31.120; 31.260Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2014.Amendments/corrigenda
4、 issued since publicationDate Text affectedBRITISH STANDARDBS IEC 62629-12-1:2014IEC 62629-12-1 Edition 1.0 2014-01 INTERNATIONAL STANDARD NORME INTERNATIONALE 3D Display devices Part 12-1: Measuring methods for stereoscopic displays using glasses Optical Dispositifs daffichage 3D Partie 12-1: Mthod
5、es de mesure pour les crans stroscopiques utilisant des lunettes Optique INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE XB ICS 31.120; 31.260 PRICE CODE CODE PRIX ISBN 978-2-8322-1309-4 Registered trademark of the International Electrotechnical Commission Marque
6、 dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. BS IEC 62629-12-1:2014 2 62629-12-1 IEC:2014 CONTENTS FOREWOR
7、D . 7 1 Scope 9 2 Normative references 10 3 Terms and definitions 10 4 Structure of measuring equipment . 12 5 Standard measuring conditions 12 5.1 Environmental conditions . 12 5.2 Set-up conditions . 12 5.2.1 Measurement distance and viewing direction 12 5.2.2 Measuring layouts 12 5.2.3 Set-up con
8、ditions of stereoscopic display . 17 5.2.4 Glasses 17 5.2.5 LMD (light measuring device) . 21 5.3 Input signals 22 5.3.1 Signal format and field frequency of input video signal 22 5.3.2 List of input signals . 22 5.4 Measuring points . 24 5.5 Warm-up condition of display modules and glasses . 24 5.6
9、 Lighting conditions . 24 5.6.1 General 24 5.6.2 Dark-room conditions 24 5.7 List of input signals, measuring points and layout for each measuring item . 25 6 Measuring methods for the pair of stereoscopic display and glasses . 25 6.1 General 25 6.2 Luminance, luminance uniformity and interocular lu
10、minance difference 26 6.2.1 Purpose 26 6.2.2 Measuring equipment . 26 6.2.3 Measuring conditions 26 6.2.4 Measuring procedure 26 6.2.5 Measurement report 27 6.3 Dark-room contrast ratio and interocular contrast difference 28 6.3.1 General 28 6.3.2 Measuring equipment . 28 6.3.3 Measuring conditions
11、29 6.3.4 Input signal . 29 6.3.5 Measuring procedure 29 6.3.6 Measurement report 30 6.4 Colour gamut . 31 6.4.1 Purpose 31 6.4.2 Measuring equipment . 31 6.4.3 Measurement 31 6.5 White chromaticity, chromatic uniformity and interocular chromatic difference . 32 6.5.1 Purpose 32 BS IEC 62629-12-1:201
12、462629-12-1 IEC:2014 3 6.5.2 Measuring equipment . 32 6.5.3 Measurement 32 6.6 Interocular crosstalk at screen centre. 33 6.6.1 General 33 6.6.2 Measuring equipment . 34 6.6.3 Measuring conditions 34 6.6.4 Selection of the method (selection of applied signals) . 34 6.6.5 Input signal . 34 6.6.6 Proc
13、edure for 4 % window method 35 6.6.7 Procedure for full screen method 35 6.6.8 Calculation of interocular crosstalk . 35 6.6.9 Measurement report 36 6.7 Interocular crosstalk screen position dependency (interocular crosstalk uniformity) 37 6.7.1 General 37 6.7.2 Measuring equipment . 37 6.7.3 Measur
14、ing conditions 37 6.7.4 Measuring layout 38 6.7.5 Use of two-dimensional LMD 38 6.7.6 Selection of the method (selection of applied signals) . 38 6.7.7 Input signal of full screen and 0,44 % windows methods . 38 6.7.8 Procedure using full screen or 0,44 % windows signals for a two-dimensional LMD .
15、39 6.7.9 Procedure using full screen or 0,44 % windows signals with a point-measurement LMD . 40 6.7.10 Measurement report 40 6.8 Viewing direction dependency 41 6.8.1 General 41 6.8.2 Viewing direction (angle) 41 6.8.3 Measuring item . 41 6.8.4 Measuring equipment . 41 6.8.5 Input signals . 42 6.8.
16、6 Measuring conditions 42 6.8.7 Measuring procedure 42 6.8.8 Measurement report 42 6.9 Characteristics depending on the in-plane rotation of the glass lens 44 6.9.1 Purpose 44 6.9.2 Measurement in-plane rotation . 44 6.9.3 Measuring item . 44 6.9.4 Measuring equipment . 44 6.9.5 Input signals . 44 6
17、.9.6 Measuring conditions 44 6.9.7 Measuring procedure 44 6.9.8 Measurement report 45 6.10 Characteristics depending on the tilt of the glass lens 45 6.10.1 Purpose 45 6.10.2 Measurement 45 6.10.3 Measurement report 45 6.11 Viewing distance dependency 45 6.11.1 General 45 BS IEC 62629-12-1:2014 4 62
18、629-12-1 IEC:2014 6.11.2 Measurement distance 46 6.11.3 Measuring item . 46 6.11.4 Measuring equipment . 46 6.11.5 Input signals . 46 6.11.6 Measuring conditions 46 6.11.7 Measuring procedure 46 6.11.8 Measurement report 47 7 Measuring methods for the glasses . 48 7.1 General 48 7.2 Additional equip
19、ment for the measurement of glasses 49 7.2.1 General 49 7.2.2 Light source 49 7.2.3 Polarizer . 49 7.2.4 Optical band pass filter . 49 7.2.5 Fast response light measuring device (fast response LMD) 50 7.3 Measuring conditions of glasses 50 7.3.1 General 50 7.3.2 Designed centre of glass lens . 50 7.
20、3.3 Standard measuring layout of glasses 50 7.3.4 Driving conditions (frequency and open-close duty) of active glasses . 51 7.3.5 Lighting condition . 52 7.3.6 Temperature conditions of glasses . 52 7.4 Transmittance at open and closed states, colour shift, extinction ratio, interocular transmittanc
21、e, interocular extinction ratio and interocular chromaticity difference . 53 7.4.1 General 53 7.4.2 Description of colour shift . 53 7.4.3 Measuring equipment . 53 7.4.4 Measuring conditions 53 7.4.5 Measuring procedure 53 7.5 Response time (open state to/from closed state) of active glasses . 59 7.
22、5.1 General 59 7.5.2 Measuring equipment . 60 7.5.3 Measuring conditions 60 7.5.4 Measuring procedure 60 7.5.5 Analysis of response time . 61 7.5.6 Measurement report 62 7.6 Angular characteristic 62 7.6.1 General 62 7.6.2 Measuring item . 62 7.6.3 Measuring conditions 62 7.6.4 Layout of the glasses
23、 62 7.6.5 Procedure . 63 7.6.6 Measurement report 63 7.7 Temperature dependency 63 7.7.1 General 63 7.7.2 Measuring item . 63 7.7.3 Additional measuring equipment . 63 BS IEC 62629-12-1:201462629-12-1 IEC:2014 5 7.7.4 Measuring conditions 63 7.7.5 Layout of glasses 63 7.7.6 Procedure . 63 7.7.7 Meas
24、urement report 64 7.8 Lens uniformity 64 7.8.1 General 64 7.8.2 Measuring equipment . 64 7.8.3 Measuring conditions 64 7.8.4 Measuring procedure 65 Annex A (informative) Symbols 67 Bibliography 69 Figure 1 Standard measuring layout (side view, centre point measurement) 13 Figure 2 Measuring layout f
25、or multi-point measurement with head-still (eye-turn) condition (side view) . 14 Figure 3 Measuring layout for multi-point measurement with head-turn (point-observation) condition (side view) . 14 Figure 4 Head-turn and head-still conditions (top views) 15 Figure 5 Measuring layout for designed view
26、ing point (side view) 15 Figure 6 Measuring layout for horizontal viewing direction dependency 16 Figure 7 Measuring layout for vertical viewing direction dependency 17 Figure 8 Example of designed configuration of glasses 18 Figure 9 Position of glasses . 19 Figure 10 In-plane rotation of glasses (
27、front view) 19 Figure 11 Layout of glasses for larger aperture LMD 20 Figure 12 Example image in the view finder . 20 Figure 13 Layout of glasses for larger aperture LMD for multi-point measurement with head-still condition 21 Figure 14 Layout of glasses for larger aperture LMD for multi-point measu
28、rement with head-turn condition 21 Figure 15 4 % window 23 Figure 16 Offset 4 % window . 23 Figure 17 Measuring points for the centre and multi-point measurement 24 Figure 18 Example measurement result of colour gamut 32 Figure 19 0,44 % white windows at level 100 % for the measurement of interocula
29、r crosstalk screen position dependency . 38 Figure 20 Signals of 0,44 % white windows methods for interocular crosstalk screen position dependency . 39 Figure 21 Standard measuring layout of glasses 51 Figure 22 Some classification examples of stereoscopic displays using a polarizer 51 Figure 23 Sta
30、ndard driving timing chart for active glasses 52 Figure 24 Temperature chamber 52 Figure 25 Configuration of measurement for the response time of the glasses . 60 Figure 26 Example of observed response waveform 61 Figure 27 Example analysis of response waveform 61 Figure 28 Measuring layout of lens
31、uniformity using a point-measurement LMD . 65 BS IEC 62629-12-1:2014 6 62629-12-1 IEC:2014 Figure 29 Measuring layout of lens uniformity using a two-dimensional LMD 65 Figure 30 Measuring points of lens uniformity measurement 65 Figure A.1 Subscripts of symbols (example 1) 67 Figure A.2 Subscripts o
32、f symbols (example 2) 67 Table 1 List of input signals, measuring points and layout for each measuring item . 25 Table 2 Example of measurement result for full screen white luminance, 4 % white window luminance and luminance uniformity . 27 Table 3 Example of full screen white luminance, 4 % white w
33、indow luminance and interocular luminance difference . 28 Table 4 Example table of 4 % window dark-room contrast ratio and interocular contrast difference 31 Table 5 Example of white chromaticity measurement result 33 Table 6 Example of measurement result of interocular crosstalk at screen centre 37
34、 Table 7 Example of measurement summary of interocular crosstalk screen position dependency for left view by 9-point measurement . 40 Table 8 Example of measurement result for viewing direction dependency of full screen white luminance, 4 % white window luminance, dark-room contrast ratio and intero
35、cular crosstalk at screen centre 43 Table 9 Example of measurement result for viewing distance dependency . 48 Table 10 Active glasses (1) 58 Table 11 Active glasses (2) 58 Table 12 Passive glasses with circular polarizer and linear polarizer (1) 59 Table 13 Passive glasses with circular polarizer a
36、nd linear polarizer (2) 59 Table 14 Example result of response time measurement 62 Table 15 Example result of colour response time measurement . 62 Table A.1 List of typical symbols 68 BS IEC 62629-12-1:201462629-12-1 IEC:2014 7 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ 3D DISPLAY DEVICES Part 12-
37、1: Measuring methods for stereoscopic displays using glasses Optical FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote internat
38、ional co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter r
39、eferred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate
40、 in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an inter
41、national consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reason
42、able efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC
43、Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conform
44、ity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publicatio
45、n. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or fo
46、r costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct a
47、pplication of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62629-12-1 has been prepared by
48、IEC technical committee 110: Electronic display devices. The text of this standard is based on the following documents: FDIS Report on voting 110/524/FDIS 110/537/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. T
49、his publication has been drafted in accordance with the ISO/IEC Directives, Part 2. BS IEC 62629-12-1:2014 8 62629-12-1 IEC:2014 A list of all the parts in the IEC 62629 series, under the general title 3D display devices, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.
