BS ISO 105-F07-2002 Textiles - Tests for colour fastness - Specification for secondary acetate adjacent fabric《纺织品 色牢度试验 再生醋酸纤维贴衬织物规范》.pdf

上传人:priceawful190 文档编号:583272 上传时间:2018-12-15 格式:PDF 页数:10 大小:135.96KB
下载 相关 举报
BS ISO 105-F07-2002 Textiles - Tests for colour fastness - Specification for secondary acetate adjacent fabric《纺织品 色牢度试验 再生醋酸纤维贴衬织物规范》.pdf_第1页
第1页 / 共10页
BS ISO 105-F07-2002 Textiles - Tests for colour fastness - Specification for secondary acetate adjacent fabric《纺织品 色牢度试验 再生醋酸纤维贴衬织物规范》.pdf_第2页
第2页 / 共10页
BS ISO 105-F07-2002 Textiles - Tests for colour fastness - Specification for secondary acetate adjacent fabric《纺织品 色牢度试验 再生醋酸纤维贴衬织物规范》.pdf_第3页
第3页 / 共10页
BS ISO 105-F07-2002 Textiles - Tests for colour fastness - Specification for secondary acetate adjacent fabric《纺织品 色牢度试验 再生醋酸纤维贴衬织物规范》.pdf_第4页
第4页 / 共10页
BS ISO 105-F07-2002 Textiles - Tests for colour fastness - Specification for secondary acetate adjacent fabric《纺织品 色牢度试验 再生醋酸纤维贴衬织物规范》.pdf_第5页
第5页 / 共10页
亲,该文档总共10页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、BRITISH STANDARD BS ISO 105-F07:2001 Textiles Tests for colour fastness Part F07: Specification for secondary acetate adjacent fabric ICS 59.080.01 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS ISO 105-F07:2001 This British Standard, having been prepared under the directio

2、n of the Materials and Chemicals Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 12 June 2002 BSI 12 June 2002 ISBN 0 580 39816 1 National foreword This British Standard reproduces verbatim ISO 105-F07:2001 and implements it a

3、s the UK national standard. The UK participation in its preparation was entrusted to Technical Committee TCI/81, Colour fastness and colour measurement, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-reference

4、s The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or British Standards Online.

5、This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible i

6、nternational/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the

7、ISO title page, pages ii and iii, a blank page, pages 1 to 3, and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsReference number ISO 105-F07:2001(E) INTERNATIONAL STANDARD ISO 105

8、-F07 First edition 2001-02-15 Textiles Tests for colour fastness Part F07: Specification for secondary acetate adjacent fabric Textiles Essais de solidit des teintures Partie F07: Spcifications pour le tissu tmoin en actate secondaireISO 105-F07:2001(E) DPF dlcsiremia ihTs PDF file mya ctnoain emded

9、deb tyfepcaes. In acccnadroe with Aebods licnesign lopic,y this file may be pirntde ro ivwede tub slahl ton eb ideted lnuess teh tyfepacse which aer emdeddeb era licnesed to dna intslaled on teh computre freporming teh idetign. In wodlnidaogn this f,eli trapies accept tniereh teh sersnoptilibiy of t

10、on nifrgnigni Asebod licsnegni ilopcy. ehT ISO tneClar Secteraairt accepts no lilibaity ni this .aera Aebod is a tedarmakr fo Aebod Stsyems Icntaropro.de teDails fo the sfotwera pcudorts sude to crtaee tihs PFD file can be fdnuo in the Glarene Info leratiev to the fil;e the Pc-FDaertion arapmteres w

11、ere tpoimizde for pirtning. Evyre cera sah neeb taken to enseru taht teh file is suitlbae fro sue by ISO memreb idob.se In teh lnuikley etnev ttah a plborem leratign to it is f,dnuo lpsaee ifnrom teh tneClar Sceterairat at the sserdda givne lebwo. ISO 1002 All rhgits rsevre.de elnUss towrehise scepf

12、idei, on trap of tihs cilbuptanoi mya eb cudorperde ro utzilide ni yna form ro yb yna snaem, eelctinorc ro mecinahcal, inclidugn tohpociypong dna micrfoilm, wittuoh repmissino in writing form eitreh ISO at teh erddass belwo ro ISOs memreb ydob in the ctnuoyr of the rtseuqee.r ISO cirypothg fofice sa

13、Ce tsopale 65 1121-HC aveneG 20 leT. + 41 22 947 10 11 xaF + 14 22 947 90 74 E-mail cirypothgiso.ch eWb www.iso.ch Printed in Switzlredna ii ISO 105-F07:2001(E)iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bod

14、ies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and

15、 non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives,

16、Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements o

17、f this part of ISO 105 may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. International Standard ISO 105-F07 was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 1, Tests for coloured textiles and colorants. This

18、first edition of ISO 105-F07 cancels and replaces Section F07 of the third edition of ISO 105-F:1985, which has been technically revised. ISO 105 was previously published in thirteen “parts”, each designated by a letter (e.g. “Part A”), with publication dates between 1978 and 1985. Each part contain

19、ed a series of “sections”, each designated by the respective part letter and by a two-digit serial number (e.g. “Section A01”). These sections are now being republished as separate documents, themselves designated “parts” but retaining their earlier alphanumeric designations. A complete list of thes

20、e parts is given in ISO 105-A01.INTERNATIONAL STANDARD ISO 105-F07:2001(E)1 Textiles Tests for colour fastness Part F07: Specification for secondary acetate adjacent fabric 1 Scope This part of ISO 105 specifies an undyed secondary acetate adjacent fabric which may be used for the assessment of stai

21、ning in colour fastness tests. The staining properties of the secondary acetate adjacent fabric under test are assessed against a secondary acetate reference adjacent fabric using a secondary acetate dyed reference fabric, both of which are available from a specified source. 2 Normative references T

22、he following normative documents contain provisions which, through reference in this text, constitute provisions of this part of ISO 105. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part of ISO

23、105 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Stan

24、dards. ISO 105-A02:1993, Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour. ISO 105-C02:1989, Textiles Tests for colour fastness Part C02: Colour fastness to washing: Test 2. ISO 105-J01:1997, Textiles Tests for colour fastness Part J01: General principles for me

25、asurement of surface colour. ISO 105-J02:1997, Textiles Tests for colour fastness Part J02: Instrumental assessment of relative whiteness. ISO 3071:1980, Textiles Determination of pH of the aqueous extract. ISO 3801:1977, Textiles Woven fabrics Determination of mass per unit length and mass per unit

26、 area. 3 Materials 3.1 Secondary acetate adjacent fabric under test, in accordance with the requirements in clause 4. 3.2 Secondary acetate reference adjacent fabric, in accordance with the requirements in clause 4. 3.3 Secondary acetate dyed reference fabric, in accordance with the requirements in

27、clause 4, and dyed with C.I. Disperse Red 1. NOTE Contact AATCC, One Davis Drive, P.O. Box 12215, Research Triangle Park, NC 27709-2215, U.S.A., for sources of supply for reference adjacent fabrics and for dyed reference fabrics.ISO 105-F07:2001(E) 2 4 Specification for secondary acetate adjacent fa

28、bric The fabric shall have the following properties. Mass per unit area: (160 5) g/m 2 determined in accordance with ISO 3801. Whiteness value: Y 10 86 2 W 10 69 2 T 10 1 1( i .e . 2to0 ) Measurements shall be made with specular included in accordance with ISO 105-J01, excluding 0/45 (45/0). Luminan

29、ce (Y 10 ), Whiteness (W 10 )a n dT i n t( T 10 ) values shall be calculated using CIE standard illuminant D 65 and CIE 1964 supplementary standard colorimetric observer (10 observer) in accordance with ISO 105-J02. The pH of the aqueous extract shall be 7 0,5 when determined by the method described

30、 in ISO 3071. NOTE Information about the production of secondary acetate adjacent fabric and secondary acetate dyed reference fabric is held in a report by the co-secretariats of ISO/TC 38/SC 1. 5 Assessment of staining properties of secondary acetate adjacent fabric under test 5.1 General As adjace

31、nt fabrics are required to yield reproducible results when used in colour fastness tests, their most important property is standardized staining characteristics. The staining characteristics of secondary acetate adjacent fabric under test shall conform to those of the secondary acetate reference adj

32、acent fabric when tested using the secondary acetate dyed reference fabric. 5.2 Test procedure Place a secondary acetate dyed reference fabric (3.3) between the secondary acetate adjacent fabric under test (3.1) and the secondary acetate reference adjacent fabric (3.2). To eliminate possible differe

33、nces in test conditions, use both the secondary acetate adjacent fabric under test and the secondary acetate reference adjacent fabric in th esa meco mp o si tesp e ci me n .Te stth espe ci me na cco rd i n gtoIS O1 05-C0 2. 5.3 Performance requirements The colour difference between the stain on the

34、 secondary acetate adjacent fabric under test and the stain on the secondary acetate reference adjacent fabric shall not be greater than 4-5 when evaluated using the grey scale for assessing change in colour, in accordance with ISO 105-A02.ISO 105-F07:2001(E)3 Bibliography 1 ISO 105-A01:1994, Textil

35、es Tests for colour fastness Part A01: General principles of testing.BS ISO 105-F07:2001 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at

36、the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and se

37、rvices. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers

38、members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44

39、 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Informati

40、on on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the

41、Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Adminis

42、tration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyrigh

43、t subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or

44、 by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.

展开阅读全文
相关资源
  • BS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdfBS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdf
  • BS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdfBS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdf
  • BS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdfBS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdf
  • BS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdfBS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdf
  • BS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdfBS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdf
  • BS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdfBS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdf
  • BS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdfBS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdf
  • BS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdfBS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdf
  • BS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdfBS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdf
  • BS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdfBS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > BS

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1