1、BSI Standards PublicationBS ISO 13007-5:2015Ceramic tiles Grouts andadhesivesPart 5: Requirements, test methods,evaluation of conformity, classification anddesignation of liquid-applied waterproofingmembranes for use beneath ceramic tilingbonded with adhesivesBS ISO 13007-5:2015 BRITISH STANDARDNati
2、onal forewordThis British Standard is the UK implementation of ISO 13007-5:2015.The UK participation in its preparation was entrusted to TechnicalCommittee B/539, Ceramic tiles and other rigid tiling.A list of organizations represented on this committee can beobtained on request to its secretary.Thi
3、s publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2015. Published by BSI StandardsLimited 2015ISBN 978 0 580 81946 9ICS 91.100.10; 91.100.23Compliance with a British Standard cannot
4、 confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 August 2015.Amendments issued since publicationDate Text affectedBS ISO 13007-5:2015 ISO 2015Ceramic tiles Grouts and adhesives Part 5: Requirements, tes
5、t methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesivesCarreaux cramiques Mortiers de joints et colles Partie 5: Exigences, mthodes dessai, valuation de conformit, classification et la dsignati
6、on des membranes liquides tanches leau appliques pour la pose de carreaux cramiquesINTERNATIONAL STANDARDISO13007-5First edition2015-08-15Reference numberISO 13007-5:2015(E)BS ISO 13007-5:2015ISO 13007-5:2015(E)ii ISO 2015 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2015, Published in Switze
7、rlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requ
8、ested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 13007-5:2015ISO 13007-5:2015(E)Foreword iv1 Scop
9、e . 12 Normative references 13 Terms and definitions . 24 Requirements 25 Evaluation of conformity 35.1 General . 35.2 Reaction to fire 36 Classification and designation . 37 Marking and labelling . 5Annex A (normative) Test methods . 6Bibliography .19 ISO 2015 All rights reserved iiiContents PageBS
10、 ISO 13007-5:2015ISO 13007-5:2015(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body in
11、terested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechni
12、cal Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO doc
13、uments should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsi
14、ble for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for
15、 the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL:
16、 Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 189, Ceramic tile.ISO 13007 consists of the following parts, under the general title Ceramic tiles Grouts and adhesives: Part 1: Terms, definitions and specifications for adhesives Part 2: Test methods for adh
17、esives Part 3: Terms, definitions and specifications for grouts Part 4: Test methods for grouts Part 5: Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing products for use beneath ceramic tiling bonded with adhesivesiv ISO 2015 All ri
18、ghts reservedBS ISO 13007-5:2015INTERNATIONAL STANDARD ISO 13007-5:2015(E)Ceramic tiles Grouts and adhesives Part 5: Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesives1 Sc
19、opeThis part of ISO 13007 gives terminology concerning the products, and specifies test methods (see Annex A) and values of performance requirements, for liquid-applied waterproofing products associated with tile adhesives. It specifies the evaluation of conformity and the classification and designa
20、tion of liquid-applied waterproofing products beneath ceramic tiling.It is applicable to all liquid-applied waterproofing membranes including polymer modified cementitious coatings, dispersions and reaction resin coatings used beneath ceramic tiling for internal and external tile installations on wa
21、lls and floors.NOTE Liquid-applied waterproofing products can also be used beneath other types of tiles (natural and agglomerated stones, etc.), as long as an adverse reaction does not occur between the membrane and the alternative tile.2 Normative referencesThe following documents, in whole or in p
22、art, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 13006, Ceramic tiles Definitions, classificat
23、ion, characteristics and markingISO 13007-1, Ceramic tiles Grouts and adhesives Part 1: Terms, definitions and specifications for adhesivesISO 13007-2, Ceramic tiles Grouts and adhesives Part 2: Test methods for adhesivesISO 15605, Adhesives SamplingEN 196-1, Methods of testing cement Part 1: Determ
24、ination of strengthEN 197-1, Cement Part 1: Composition, specifications and conformity criteria for common cementsEN 480-1:2006, Admixture for concrete, mortar and grout Test methods Part 1: Reference concrete and mortar for testingEN 1008, Mixing water for concrete Specification for sampling, testi
25、ng and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concreteEN 1067, Adhesives Examination and preparation of samples for testingEN 12390-2, Testing hardened concrete Making and curing specimens for strength testsEN 12620,
26、 Aggregates for concrete ISO 2015 All rights reserved 1BS ISO 13007-5:2015ISO 13007-5:2015(E)3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.3.1liquid-applied waterproofing membranesingle- or multi component waterproofing material applied in a unif
27、orm layer or layers, beneath ceramic tilingNote 1 to entry: The final waterproofing membrane can include a reinforcing cloth or mesh.3.2polymer modified cementitious liquid-applied waterproofing membraneCMmixture of hydraulic binding agents, aggregates and organic additives that has only to be mixed
28、 with water or liquid admixture just before use3.3dispersion liquid-applied waterproofing membraneDMmixture of organic binding agent(s) in the form of an aqueous polymer dispersion, organic additives and mineral fillersNote 1 to entry: The mixture is ready for use.3.4reaction resin liquid-applied wa
29、terproofing membraneRMmixture of synthetic resin, mineral fillers and organic additives in which hardening occurs by chemical reactionNote 1 to entry: They are available in one or more component forms.3.5crack bridging abilityability of the cured waterproofing material to withstand propagation of cr
30、acks without deterioration3.6primerliquid coating applied to the surface, prior to the application of a liquid waterproofing product, to improve adhesion and durability of the bond between the substrate and the membrane3.7fundamental characteristicscharacteristics that a liquid-applied waterproofing
31、 membrane product always needs to have3.8optional characteristicscharacteristics for specific service conditions where enhanced levels of performance are required or which provide further information about its general performance4 RequirementsThe liquid-applied waterproofing membrane products shall
32、comply with the characteristics specified in Table 1.Table 2 gives the additional characteristics that might be required for special service conditions.The amount of water and/or liquid admixture required for preparing the cementitious liquid-applied water waterproofing membrane shall be the same fo
33、r all tests of that product.2 ISO 2015 All rights reservedBS ISO 13007-5:2015ISO 13007-5:2015(E)Table 1 Product requirements Fundamental characteristicsCharacteristic Requirement Test methodInitial tensile adhesion strength 0,5 N/mm2A.6.2Tensile adhesion strength after water contact 0,5 N/mm2A.6.3 o
34、r A.6.4Tensile adhesion strength after heat ageing 0,5 N/mm2A.6.5Tensile adhesion strength after freezethaw cycles 0,5 N/mm2A.6.6Tensile adhesion strength after contact with lime water 0,5 N/mm2A.6.9Waterproofing No visual penetra-tion below mem-brane and 20 g weight gainA.7Crack bridging ability un
35、der standard conditions 0,75 mm A.8.2Table 2 Product requirements Optional characteristicsCharacteristic Requirement Test methodTensile adhesion strength after contact with chlorinated water 0,5 N/mm2A.6.7 or A.6.8Crack bridging ability at low temperature (- 5C) 0,75 mm A.8.3Crack bridging ability a
36、t very low temperature (- 20C) 0,75 mm A.8.35 Evaluation of conformity5.1 GeneralThe liquid-applied waterproofing membrane shall be considered conformant if test results indicate compliance with all of the fundamental characteristics listed in Table 1. For those products claiming the optional classi
37、fications in Clause 5, test results must also indicate compliance with the optional characteristics listed in Table 2.5.2 Reaction to fireReaction to fire may be of concern in individual countries, and may need to be considered in light of local standards or regulatory requirements6 Classification a
38、nd designationThe liquid-applied waterproofing membranes are classified into one of the three types, according to the definitions given in Clause 3:CM cementitious liquid-applied waterproofing membrane;DM dispersion liquid-applied waterproofing membrane;RM reaction resin liquid-applied waterproofing
39、 membrane.For each type it is possible to have different classes, related to the different optional characteristics given in Table 2. These classes are designated by the following abbreviations:O1 with improved crack bridging ability at 5C;O2 with improved crack bridging ability at 20C;P resistant t
40、o contact with chlorinated water (i.e. for use in swimming pools). ISO 2015 All rights reserved 3BS ISO 13007-5:2015ISO 13007-5:2015(E)The product is designated by the symbol for the type (CM, DM or RM), followed by the abbreviation of the class or classes it belongs to. Table 3 describes the design
41、ation of the products types and classes which shall be used.Table 3 Classification and designation of liquid-applied waterproofing membranesSymbolDescriptionType ClassCM Normal cementitious liquid-applied waterproofing membraneDM Normal dispersion liquid-applied waterproofing membraneRM Normal react
42、ion resin liquid-applied waterproofing membraneCM O1Cementitious liquid-applied waterproofing membrane with crack bridging ability at low temperature (5C)CM O2Cementitious liquid-applied waterproofing membrane with crack bridging ability at low temperature (20C)DM O1Dispersion liquid-applied waterpr
43、oofing membrane with crack bridging ability at low tem-perature (5C)DM O2Dispersion liquid-applied waterproofing membrane with crack bridging ability at low tem-perature (20C)RM O1Reaction resin liquid-applied waterproofing membrane with crack bridging ability at low temperature (5C)RM O2Reaction re
44、sin liquid-applied waterproofing membrane with crack bridging ability at low temperature (20C)CM PCementitious liquid-applied waterproofing membrane resistant to contact with chlorinated waterDM P Dispersion liquid-applied waterproofing membrane resistant to contact with chlorinated waterRM PReactio
45、n resin liquid-applied waterproofing membrane resistant to contact with chlorinated waterCM O1PCementitious liquid-applied waterproofing membrane with crack bridging ability at low temperature (5C) and resistant to contact with chlorinated waterCM O2PCementitious liquid-applied waterproofing membran
46、e with crack bridging ability at low temperature (20C) and resistant to contact with chlorinated waterDM O1PDispersion liquid-applied waterproofing membrane with crack bridging ability at low tem-perature (5C) and resistant to contact with chlorinated waterDM O2PDispersion liquid-applied waterproofi
47、ng membrane with crack bridging ability at low tem-perature (20C) and resistant to contact with chlorinated waterRM O1PReaction resin liquid-applied waterproofing membrane with crack bridging ability at low temperature (5C) and resistant to contact with chlorinated waterRM O2PReaction resin liquid-a
48、pplied waterproofing membrane with crack bridging ability at low temperature (20C) and resistant to contact with chlorinated water4 ISO 2015 All rights reservedBS ISO 13007-5:2015ISO 13007-5:2015(E)7 Marking and labellingProducts complying with the requirements of this part of ISO 13007 shall be cle
49、arly marked with the following information:a) name of the product;b) manufacturers mark and place of origin;c) date or code of production, shelf life and conditions of storage;d) dated reference to this part of ISO 13007, i.e. ISO 13007-5:2015;e) type of product according to Clause 6 and using symbols given in Clause 6;f) instructions for use: mix proportions (where applicable); maturing time (where applicable); pot life; mo
