1、BRITISH STANDARD BS ISO 15142-3:2003 Implants for surgery Metal intramedullary nailing systems Part 3: Connection devices and reamer diameter measurements ICS 11.040.40 BS ISO 15142-3:2003 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 21 Au
2、gust 2003 BSI 21 August 2003 ISBN 0 580 42495 2 National foreword This British Standard reproduces verbatim ISO 15142-3:2003 and implements it as the UK national standard. Together with the British Standards BS ISO 15142-1 and BS ISO 15142-2:2003 it supersedes BS 3531-14.1:1990 which is withdrawn. T
3、he UK participation in its preparation was entrusted by Technical Committee CH/150, Implants for surgery, to Subcommittee CH/150/5, Osteosynthesis and spinal devices, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary
4、. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of Britis
5、h Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present
6、to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an insi
7、de front cover, the ISO title page, pages ii to v, a blank page, pages 1 to 5 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments Reference number ISO 15142-3:2003(E) OSI 3002INT
8、ERNATIONAL STANDARD ISO 15142-3 First edition 2003-08-01 Implants for surgery Metal intramedullary nailing systems Part 3: Connection devices and reamer diameter measurements Implants chirurgicaux Systmes denclouage intramdullaire en mtal Partie 3: Dispositifs de connexion et mesurage du diamtre des
9、 alsoirsBSISO151423:2003IS-24151 O3:(3002E) DPlcsid Fremia ihTs PDF file may ctnoian emdebt dedyfepcaes. In ccaocnadrw eith Aebods licensilop gnic,y this file mairp eb ynted iv roweb detu slahl ton ide ebtlnu deess the typefaces whice era hml era deddebicsnede to i dnanstlaled t noeh computfrep reor
10、mign tide ehtin.g In wodlnidaot gnhis file, trapise atpecc tiereht nser ehnopsiiblity fo not infriigngn Aebods licensilop gnic.y ehT ISO tneClar Secrteiraat caceptl on siibality in this .aera Ai ebods a tredamafo kr Aebod SystemI sncotaropr.de teDails fo teh softwacudorp erts sut deo crtaee this PDF
11、 file cna f ebi dnuon tlareneG eh Info leratit evo the file; tP ehDc-Frtaeion marapterew setpo erimizde for irpnti.gn Evyre caer neeb sah taken to sneeru that the file is suitlbae fosu re yb ISO memdob rebeis. In tlnu ehikletneve y ttah lborp aem leratit gno it is f,dnuo plsaee inform ttneC ehlar Se
12、crteiraat ta the serddaig sleb nevwo. ISO 3002 All irthgs erse.devr lnUeto sswrehise specified, on trap fo this lbupictaion maeb y cudorperro de tuilizi den yna form ro na ybm ynae,s lecetrinoc ro mecinahcal, inclidung tohpcoiypodna gn micrfoilm, wittuoh repmissii non writign from ietI rehSa Ot tsse
13、rdda eh ebolw or ISOs memreb i ydobn the cnuotrfo y ttseuqer ehe.r ISO cirypothg fofice saCe tsopale 65 eneG 1121-HC 02 av leT. 4 + 10 947 22 1 11 xaF0 947 22 14 + 9 74 E-mail coirypthgiso.o gr We bwww.is.o gro Pulbisdehi n Switlrez dnaii ISO 3002 Allr ihgtsser edevrBSISO151423:2003IS-24151 O3:(3002
14、E) I SO 3002 All irhgts seredevr iiiContents Page Foreword iv Introduction v 1 Scope 1 2 Normative references. 1 3 Terms and definitions. 1 4 Classification and designation 1 5 Insertion/removal device requirements 2 6 Measurement of reamer diameter . 2 7 Drive connections for insertion and removal
15、of locking components 2 Annex A (normative) Hook connection element dimensions 3 Annex B (informative) ANSI B1.1 parallel external threads 4 Bibliography . 5 BSISO151423:2003IS-24151 O3:(3002E) iv I SO 3002 All irhgts seredevrForeword ISO (the International Organization for Standardization) is a wor
16、ldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on
17、 that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted
18、in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standar
19、d requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 15142-3 was prepared by
20、 Technical Committee ISO/TC 150, Implants for surgery, Subcommittee SC 5, Osteosynthesis and spinal devices. ISO 15142 consists of the following parts, under the general title Implants for surgery Metal intramedullary nailing systems: Part 1: Intramedullary nails Part 2: Locking components Part 3: C
21、onnection devices and reamer diameter measurements BSISO151423:2003IS-24151 O3:(3002E) I SO 3002 All irhgts seredevr vIntroduction Intramedullary nailing is a method of fixation for temporary stabilization of long bones with reduced strength due to fractures or disease or both. Medical and engineeri
22、ng considerations influence the design of the different devices and the choice of a device for a particular clinical situation. Nails are often, but not always, removed when they have completed their intended purpose of temporary stabilization. BSISO151423:2003blank BSISO151423:2003INTENRATIONAL TSA
23、NDADR IS-24151 O3:(3002E)I SO 3002 All irhgts seredevr 1Implants for surgery Metal intramedullary nailing systems Part 3: Connection devices and reamer diameter measurements 1 Scope This part of ISO 15142 specifies metallic medical devices used for the temporary intramedullary stabilization of long
24、bones by surgical implantation, classifying and giving other requirements and dimensions for the devices used to insert, remove or both insert and remove intramedullary nails. It also provides a means of measuring reamer diameter. It is applicable to all metal intramedullary fixation devices used fo
25、r temporary fixation of long bones in the human body, except drive connections for locking elements. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the lat
26、est edition of the referenced document (including any amendments) applies. ISO 8319 (all parts), Orthopaedic instruments Drive connections ISO 15142-2, Implants for surgery Metal intramedullary nailing systems Part 2: Locking components 3 Terms and definitions For the purposes of this document, the
27、following terms and definitions apply. 3.1 connection element integral part of the nail intended to connect the nail to the locking component or insertion/removal device EXAMPLE Hole, window, bore, slot or thread. ISO 15142-1:2003, 3.5 3.2 insertion/removal device device external to the nail which c
28、onnects temporarily to the nail through the nails connection element(s) in order to assist the insertion and/or removal of the nail EXAMPLE Driving handle, drill guide, extractor bolt or hook. ISO 15142-1:2003, 3.10 4 Classification and designation Insertion/removal devices shall be classified as ei
29、ther those containing a) hooks, or b) parallel external threads. BSISO151423:2003IS-24151 O3:(3002E) 2 I SO 3002 All irhgts seredevr5 Insertion/removal device requirements 5.1 All intramedullary nails shall have features (connection elements) which permit the attachment of instruments which aid in t
30、heir insertion and removal. Such insertion/removal devices shall connect temporarily to the nail during surgery via the connection element. 5.2 The dimensions of hook connection elements for insertion/removal devices shall be in accordance with Annex A. 5.3 The dimensions of parallel external thread
31、s for insertion/removal devices should be as specified in ISO 8319 designations M4 to M12. NOTE Many existing insertion/removal devices utilize parallel external threadforms conforming to ANSI B1.1 designations 1/4-28, 5/16-24, 3/8-24, 7/16-20 and 9/16-18. Parallel external threadforms conforming to
32、 these designations can also be used. These designations are given in Annex B for information. 6 Measurement of reamer diameter The diameter of a reamer intended for use with an intramedullary nailing system shall be measured by use of a ring gauge through which the reamer will pass. The marking on
33、the reamer shall correspond to the gauge diameter. NOTE Considerable confusion has arisen in the past because reamers were described either by their actual diameter, as measured by a ring gauge, or by the diameter of the hole produced in bone or by the diameter of the nail for which they are intende
34、d. 7 Drive connections for insertion and removal of locking components See ISO 15142-2. BSISO151423:2003IS-24151 O3:(3002E) I SO 3002 All irhgts seredevr 3Annex A (normative) Hook connection element dimensions See Figure A.1 and Tables A.1 and A.2. Figure A.1 Hooks Table A.1 Dimensions for hooks in
35、cloverleaf nails Dimensions in millimetres Dimension aDiameter range e f g 6 to 9 0 0,3 2,1 10 to 16 u 3,15 7 to 8,7 W 2 aSee Figure A.1. Table A.2 Dimensions for hooks in V-shaped nails Dimensions in millimetres Dimension aDiameter range e 0 0,1 f g 4 to 5 1,2 5,5 to 11 1,8 5 to 5,8 W 2 aSee Figure
36、 A.1. BSISO151423:2003IS-24151 O3:(3002E) 4 I SO 3002 All irhgts seredevrAnnex B (informative) ANSI B1.1 parallel external threads See Table B.1 for ANSI screw thread diameters. Table B.1 Parallel external threads (as defined in ANSI B1.1) Diameter Designation inch mm 1/4-28 0,2500 6,35 5/16-24 0,31
37、25 7,94 3/8-24 0,3750 9,53 7/16-20 0,4375 11,11 9/16-18 0,5625 14,29 BSISO151423:2003IS-24151 O3:(3002E) I SO 3002 All irhgts seredevr 5Bibliography 1 ANSI B1.1, Unified Inch Screw Threads (UN & UNR Thread Forms) BSISO151423:2003BS ISO 15142-3:2003 BSI 389 Chiswick High Road London W4 4AL BSI Britis
38、h Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of Bri
39、tish Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of th
40、e technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Bu
41、ying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for internat
42、ional standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Techn
43、ical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with
44、 standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards
45、 via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies
46、. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free us
47、e, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.
