1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS ISO 15143-2:2010Earth-moving machinery andmobile road constructionmachinery Worksite dataexchangePart 2: Data dictionaryBS ISO 15143-2:2010 BRITISH STANDARDNational forewordTh
2、is British Standard is the UK implementation of ISO 15143-2:2010.The UK participation in its preparation was entrusted to TechnicalCommittee B/513/1, Earth moving machinery (International).A list of organizations represented on this committee can beobtained on request to its secretary.This publicati
3、on does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2010ISBN 978 0 580 58887 7ICS 35.240.99; 53.100Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the
4、 authority of theStandards Policy and Strategy Committee on 31 October 2010.Amendments issued since publicationDate Text affectedBS ISO 15143-2:2010Reference numberISO 15143-2:2010(E)ISO 2010INTERNATIONAL STANDARD ISO15143-2First edition2010-08-01Earth-moving machinery and mobile road construction m
5、achinery Worksite data exchange Part 2: Data dictionary Engins de terrassement et machines mobiles de construction de routes change de donnes sur le chantier Partie 2: Dictionnaire de donnes BS ISO 15143-2:2010ISO 15143-2:2010(E) PDF disclaimer This PDF file may contain embedded typefaces. In accord
6、ance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes lic
7、ensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printi
8、ng. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO 2010 All rights reserved. Unless otherwise
9、specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright offi
10、ce Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2010 All rights reservedBS ISO 15143-2:2010ISO 15143-2:2010(E) ISO 2010 All rights reserved iiiContents Page Foreword iv Introduction.v 1 Scope1 2
11、 Normative references1 3 Terms and definitions .2 3.1 General .2 3.2 Metadata .3 3.3 Elements (see Annex A for data element concept names and definitions)9 4 Data dictionary.14 4.1 General .14 4.2 Composition of data dictionary .14 4.3 Metadata .15 4.4 Classification of the data dictionary16 4.5 Des
12、cription method of data dictionary contents .18 5 Application schema for worksite data exchange.19 Annex A (normative) Basic data dictionary tables21 Annex B (normative) Structure of data dictionary 51 Annex C (informative) Application example of machine management using ISO 15143 53 Bibliography58
13、BS ISO 15143-2:2010ISO 15143-2:2010(E) iv ISO 2010 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO techni
14、cal committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely w
15、ith the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft Int
16、ernational Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document m
17、ay be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 15143-2 was prepared by Technical Committee ISO/TC 127, Earth-moving machinery, Subcommittee SC 3, Machine characteristics, electrical and electronic systems, operation and mainte
18、nance. ISO 15143 consists of the following parts, under the general title Earth-moving machinery and mobile road construction machinery Worksite data exchange: Part 1: System architecture Part 2: Data dictionary BS ISO 15143-2:2010ISO 15143-2:2010(E) ISO 2010 All rights reserved vIntroduction Electr
19、onic data exchange on the construction worksite is rapidly becoming a key technology enabling a number of advances in the construction industry. Moving from predominantly manual data collection methods to more automated data collection and communication will improve worksite quality control. Electro
20、nic data exchange will further aid in the scheduling of maintenance, the provision of supervisory functions to be conducted remotely from the worksite and the enhancement of the coordination between engineering tasks, construction management and day-to-day operations on the worksite. The implementat
21、ion of an electronic data communication system requires an a-priori definition and specification of the elements of data to be communicated. Specification of unique data elements for worksite communication involves the use of an application schema to diagrammatically identify the scenario in which e
22、ach item of data is to be used. After the scenario has been described, data elements are assigned metadata attributes to fully define and describe the individual data element. The list of data elements with attributes are compiled in tabular form in a data dictionary, which forms the subject of this
23、 part of ISO 15143. Generally, the purpose of data dictionaries is recognized to be the following: a) to improve the ability to share data elements in a particular domain or among different domains; b) to provide a base for better understanding of the semantic meaning and syntax of data elements; c)
24、 to manage a data resource so as to maintain the correctness and consistency of the resource; d) to provide a basis for the development of consistent databases and software that use databases. BS ISO 15143-2:2010BS ISO 15143-2:2010INTERNATIONAL STANDARD ISO 15143-2:2010(E) ISO 2010 All rights reserv
25、ed 1Earth-moving machinery and mobile road construction machinery Worksite data exchange Part 2: Data dictionary 1 Scope This part of ISO 15143 specifies a data dictionary for the exchange of data in worksite data-controlled construction operations as specified in ISO 15143-1. It also applies to wor
26、ksite data exchange for the purpose of services related to machine use (see ISO 15143-1:2010, Clause 4), and gives definitions of terms used in relation to the data dictionary. For the purposes of data exchange between different systems, it includes identification, definition and specification of co
27、mmon items of data to be exchanged on typical earth-moving construction worksites, definition of application schema, metadata describing the attributes of each data element, and basic normative data elements with their attributes (in tabular format). NOTE ISO 15143-1:2010, Annex A, describes the mea
28、ns to extend the data element table presented in Annex A of this part of ISO 15143. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of th
29、e referenced document (including any amendments) applies. ISO 5353:1995, Earth-moving machinery, and tractors and machinery for agriculture and forestry Seat index point ISO 15143-1:2010, Earth-moving machinery and mobile road construction machinery Worksite data exchange Part 1: System architecture
30、 ISO 19107:2003, Geographic information Spatial schema ISO/IEC 10646, Information technology Universal Multiple-Octet Coded Character Set (UCS) ISO 16754, Earth-moving machinery Determination of average ground contact pressure for crawler machines ISO/IEC 11179-1:2004, Information technology Metadat
31、a registries (MDR) Part 1: Framework ISO/IEC 11179-3:2003, Information technology Metadata registries (MDR) Part 3: Registry metamodel and basic attributes BS ISO 15143-2:2010ISO 15143-2:2010(E) 2 ISO 2010 All rights reserved3 Terms and definitions For the purposes of this document, the terms and de
32、finitions given in ISO 15143-1 and ISO/IEC 11179-1, and the following apply. 3.1 General 3.1.1 information information processing knowledge concerning objects, such as facts, events, things, processes, or ideas, including concepts, that within a certain context has a particular meaning ISO/IEC 11179
33、-1 3.1.2 information system information processing system, together with associated organizational resources such as human, technical, and financial resources, that provides and distributes information ISO 2382-1 3.1.3 data dictionary database used for data that refers to the use and structure of ot
34、her data; that is, a database for the storage of metadata ISO/IEC 11179-1 3.1.4 metadata data that defines and describes other data ISO/IEC 11179-3 3.1.5 metadata registry MDR information system for registering metadata ISO/IEC 11179-3 3.1.6 metamodel data model that specifies one or more other data
35、 models ISO/IEC 11179-3 3.1.7 metamodel construct unit of notation for modelling ISO/IEC 11179-3 3.1.8 designation representation of a concept by a sign which denotes it ISO 1087-1 cf. designation (3.2.1.2) NOTE See also name (3.2.1.9). BS ISO 15143-2:2010ISO 15143-2:2010(E) ISO 2010 All rights rese
36、rved 33.2 Metadata 3.2.1 Data elements 3.2.1.1 administered item registry item for which administrative information is recorded in an Administration Record ISO/IEC 11179-3 NOTE 1 Metamodel construct is: Class. NOTE 2 ISO/IEC 11179-3:2003, 4.7.2, lists the specifying types of administered item. 3.2.1
37、.2 designation administered item designation of an administered item within a context ISO/IEC 11179-3 NOTE 1 Metamodel construct is: Class. NOTE 2 ISO/IEC 11179-3 also defines “designation” as defined in 3.1.8 above. 3.2.1.3 classification scheme descriptive information for an arrangement or divisio
38、n of objects into groups based on characteristics which the objects have in common ISO/IEC 11179-3 3.2.1.4 classification scheme item CSI item of content in a classification scheme ISO/IEC 11179-3 NOTE 1 Metamodel construct is: Class. NOTE 2 This may be a node in a taxonomy or ontology, a term in a
39、thesaurus, etc. 3.2.1.5 classification scheme item value classification scheme name instance of a classification scheme item (CSI) ISO/IEC 11179-3 NOTE 1 Metamodel construct is: Attribute of classification scheme item. NOTE 2 See also Table 1, for the instance of the classification scheme item value
40、. 3.2.1.6 data element concept DEC concept that can be represented in the form of a data element (DE), described independently of any particular representation ISO/IEC 11179-3 NOTE Metamodel construct is: Class. 3.2.1.7 data element concept name designation item of a data element concept BS ISO 1514
41、3-2:2010ISO 15143-2:2010(E) 4 ISO 2010 All rights reserved3.2.1.8 data element DE unit of data for which the definition, identification, representation and permissible values are specified by means of a set of attributes NOTE Metamodel construct is: Class. 3.2.1.9 name administered item name by whic
42、h an administered item is designated within a specific context ISO/IEC 11179-3 NOTE 1 Metamodel construct is: Attribute of designation. NOTE 2 ISO/IEC 11179-3 also defines “name” as the designation of an object by a linguistic expression. 3.2.1.10 definition administered item definition of an admini
43、stered item within a context ISO/IEC 11179-3 NOTE 1 Metamodel construct is: Class. NOTE 2 ISO/IEC 11179-3 also defines “definition” as the representation of a concept by a descriptive statement which serves to differentiate it from related concepts. 3.2.1.11 definition text definition text of the de
44、finition ISO/IEC 11179-3 NOTE Metamodel construct is: Attribute of definition. 3.2.1.12 definition source reference reference to the source from which the definition is taken ISO/IEC 11179-3 NOTE Metamodel construct is: Attribute of definition. 3.2.1.13 data element example representative illustrati
45、on of the data element ISO/IEC 11179-3 NOTE Metamodel construct is: Class. 3.2.1.14 data element example item actual illustrative case of the data element ISO/IEC 11179-3 NOTE Metamodel construct is: Attribute of data element example. BS ISO 15143-2:2010ISO 15143-2:2010(E) ISO 2010 All rights reserv
46、ed 53.2.1.15 data origin reference to the physical source of the data; the instrument, individual or device that performs the measurement and originates the value of the data element NOTE Metamodel construct is: Attribute of source. 3.2.1.16 origin administered item source (document, project, discip
47、line or model) of the administered item NOTE Metamodel construct is: Attribute of administration record. 3.2.1.17 data identifier item identifier unique identifier for an administered item within a maintenance agency ISO/IEC 11179-3 NOTE Metamodel construct is: Attribute of item identifier. 3.2.1.18
48、 version version number unique version identifier of the administered item ISO/IEC 11179-3 NOTE Metamodel construct is: Attribute of item identifier. 3.2.1.19 administrative status current status designation of the status in the administrative process of a maintenance agency for handling registratio
49、n requests ISO/IEC 11179-3 NOTE 1 Metamodel construct is: Attribute of administration record. NOTE 2 The values and associated meanings of “administrative status” are determined by each maintenance agency. 3.2.1.20 last change date date of last change date the administered item was last changed ISO/IEC 11179-3 NOTE Metamodel construct is: Attribute of administration record. 3.2.1.21 explanatory comment comment descriptive comments about the
