1、BSI Standards PublicationBS ISO 17572-2:2015Intelligent transport systems(ITS) Location referencing forgeographic databasesPart 2: Pre-coded location references (pre-coded profile)BS ISO 17572-2:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 17572-2:2015.
2、 It supersedes BS ISO 17572-2:2008 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee EPL/278, Intelligent transport systems.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purpor
3、t to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 82014 4 ICS 03.220.01; 35.240.60 Compliance with a British Standard cannot confer immunity from leg
4、al obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e d ISO 2015Intelligent transport systems (ITS) Location referencing for geographic database
5、s Part 2: Pre-coded location references (pre-coded profile)Systmes intelligents de transport (SIT) Localisation pour bases de donnes gographiques Partie 2: Localisations prcodes (profil prcod)INTERNATIONAL STANDARDISO 17572-2Second edition 2015-01-15Reference number ISO 17572-2:2015(E)BS ISO 17572-2
6、:2015ISO 17572-2:2015(E)ii ISO 2015 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2015All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting o
7、n the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCase postale 56 CH-1211 Geneva 20Tel. + 41 22 749 01 11Fax + 41 22 749 09 47E-mail copyrightiso.or
8、gWeb www.iso.orgPublished in SwitzerlandBS ISO 17572-2:2015ISO 17572-2:2015(E) ISO 2015 All rights reserved iiiContents PageForeword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 14 Abbreviated terms 25 Requirements for a location referencing standard 26 Conceptual dat
9、a model for location referencing methods . 27 Specification of pre-coded location references 37.1 General concept 37.2 Location database creation and updating . 47.3 Location database provision . 47.4 Location database usage . 48 Implementations at present . 48.1 General . 48.2 Vehicle Information a
10、nd Communication System (VICS) . 48.3 Traffic Message Channel (TMC)/ALERT-C Specification . 58.4 Korean node link ID system . 68.5 Road Section Identification Data set 6Annex A (informative) Logical format for VICS link location 8Annex B (informative) ALERT-C location reference, TPEG2 logical struct
11、ure 28Annex C (normative) ALERT-C location reference, TPEG2 binary representation 31Annex D (normative) ALERT-C location reference, TPEG2 XML representation 33Annex E (informative) Korean node-link location reference, TPEG2 logical structure 35Annex F (normative) Korean node-link location reference,
12、 TPEG2 binary representation 37Annex G (normative) Korean node-link location reference, TPEG2 XML representation .38Annex H (informative) Road Section Identification Data set .40Bibliography .46BS ISO 17572-2:2015ISO 17572-2:2015(E)ForewordISO (the International Organization for Standardization) is
13、a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represent
14、ed on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop t
15、his document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC
16、Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the d
17、evelopment of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of
18、ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 204, Intell
19、igent transport systems.This second edition cancels and replaces the first edition (ISO 17572-2:2008), which has been technically revised.ISO 17572 consists of the following parts, under the general title Intelligent transport systems (ITS) Location referencing for geographic databases: Part 1: Gene
20、ral requirements and conceptual model Part 2: Pre-coded location references (pre-coded profile) Part 3: Dynamic location references (dynamic profile)iv ISO 2015 All rights reservedBS ISO 17572-2:2015ISO 17572-2:2015(E)IntroductionA location reference (LR) is a unique identification of a geographic o
21、bject. In a digital world, a real-world geographic object can be represented by a feature in a geographic database. An example of a commonly known location reference is a postal address of a house. Examples of object instances include a particular exit ramp on a particular motorway, a road junction,
22、 or a hotel. For efficiency reasons, location references are often coded. This is especially significant if the location reference is used to define the location for information about various objects between different systems. For intelligent transport systems (ITS), many different types of real-wor
23、ld objects will be addressed. Amongst these, location referencing of the road network, or components thereof, is a particular focus.Communication of a location reference for specific geographic phenomena, corresponding to objects in geographic databases, in a standard, unambiguous manner is a vital
24、part of an integrated ITS system in which different applications and sources of geographic data will be used. location referencing methods (LRMs, methods of referencing object instances) differ by applications, by the data model used to create the database, or by the enforced object referencing impo
25、sed by the specific mapping system used to create and store the database. A standard location referencing method allows for a common and unambiguous identification of object instances representing the same geographic phenomena in different geographic databases produced by different vendors, for vari
26、ed applications, and operating on multiple hardware/software platforms. If ITS applications using digital map databases are to become widespread, data reference across various applications and systems has to be possible. Information prepared on one system, such as traffic messages, has to be interpr
27、etable by all receiving systems. A standard method to refer to specific object instances is essential to achieving such objectives.Japan, Korea, Australia, Canada, the US, and European ITS bodies are all supporting activities of location referencing. Japan has developed a Link Specification for VICS
28、. Japan has developed the Road Section Identification Data set which uses road sections and reference points after the publication of the first edition of this part of ISO 17572 in 2008. In Europe, the RDS-TMC traffic messaging system has been developed. In addition, methods have been developed and
29、refined in the EVIDENCE and AGORA projects based on intersections identified by geographic coordinates and other intersection descriptors. In the US, standards for location referencing have been developed to accommodate several different location referencing methods.This International Standard provi
30、des specifications for location referencing for ITS systems (although other committees or standardization bodies can subsequently consider extending it to a more generic context). In addition, this edition does not deal with public transport location referencing; this issue will be dealt with in a l
31、ater edition. ISO 2015 All rights reserved vBS ISO 17572-2:2015BS ISO 17572-2:2015Intelligent transport systems (ITS) Location referencing for geographic databases Part 2: Pre-coded location references (pre-coded profile)1 ScopeThis International Standard specifies location referencing methods (LRMs
32、) that describe locations in the context of geographic databases and will be used to locate transport-related phenomena in an encoder system as well as in the decoder side. This International Standard defines what is meant by such objects and describes the reference in detail, including whether or n
33、ot components of the reference are mandatory or optional, and their characteristics.This International Standard specifies two different LRMs: pre-coded location references (pre-coded profile); dynamic location references (dynamic profile).This International Standard does not define a physical format
34、 for implementing the LRM. However, the requirements for physical formats are defined.This part of ISO 17572 specifies the pre-coded location referencing method, comprising specification of pre-coded location references (pre-coded profile), logical format for VICS link location (see Annex A), TPEG p
35、hysical format for ALERT-C-location references (see Annex B, Annex C, and Annex D), TPEG physical format for Korean node-link ID references (see Annex E, Annex F, and Annex G), and logical format for Road Section Identification Data set (see Annex H).Logical formats of the implementations at present
36、 are described as informative; on the other hand, physical formats of the implementations at present are described as normative in the annexes.It is consistent with other International Standards developed by ISO/TC 204 such as ISO 14825.2 Normative referencesThe following documents, in whole or in p
37、art, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 17572-1, Intelligent transport systems (ITS)
38、Location referencing for geographic databases Part 1: General requirements and conceptual model3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 17572-1 and the following apply.INTERNATIONAL STANDARD ISO 17572-2:2015(E) ISO 2015 All rights reserved 1BS
39、ISO 17572-2:2015ISO 17572-2:2015(E)3.1major linkdirected link in a road network4 Abbreviated termsALERT Advice and Problem Location for European Road TrafficDATEX Data Exchange (protocol for exchange of traffic and travel information between traffic centres)GCId generic component identifierGDF Geogr
40、aphic Data FileID identifierITRF International Terrestrial Reference FrameLDB location databaseLI location informationLR location referencing (or reference)LRM location referencing methodLRS location referencing systemLRP location referencing procedureMOCT Ministry of Construction and Transportation
41、 (Republic of Korea)RDS Radio Data SystemSOEI System Operating and Exchanging InformationTMC Traffic Message ChannelTPEG Transport Protocol Expert GroupTTI Traffic and Traveller InformationUTM Universal Transverse MercatorVICS Vehicle Information and Communication SystemRSIDs Road Section Identifica
42、tion Data set5 Requirements for a location referencing standardFor details, see ISO 17572-1:2014, Clause 4.For an inventory of location referencing methods, see ISO 17572-1:2014, Annex A.6 Conceptual data model for location referencing methodsFor details, see ISO 17572-1:2014, Clause 5.2 ISO 2015 Al
43、l rights reservedBS ISO 17572-2:2015ISO 17572-2:2015(E)For examples of conceptual data model use, see ISO 17572-1:2014, Annex B.7 Specification of pre-coded location references7.1 General conceptPre-coded location referencing is a method which makes use of end-user client devices carrying a location
44、 database (LDB) that is exactly the same as the corresponding location database used by a service provider of a particular message being exchanged. All pre-coded location referencing methods shall share the concept of defining a commonly used database of IDs. This concept has been developed in the p
45、ast for technologies such as RDS-TMC and VICS to allow an (over-the-air) interface to be designed that uses compact code values (IDs) in the corresponding databases to express particular pre-coded locations of various types.The location referencing method here is divided into three steps performed t
46、o implement the location referencing system. The first step is a process of defining the database of location IDs for a given area and the corresponding road network. In this step, different service providers and systems provider agree on a defined database containing all locations to be codable (lo
47、cation database creation). In the second step, this database is provisioned via various means into the service providers database as well as into all receiving systems (location database provisioning). The third step is in real-time where a service provider can now make use of that database and refe
48、rence to locations by using the newly introduced IDs (location database usage). See Figure 1, which illustrates this concept.Figure 1 General concept of pre-coded location referencing system ISO 2015 All rights reserved 3BS ISO 17572-2:2015ISO 17572-2:2015(E)7.2 Location database creation and updati
49、ngThe different location referencing systems more or less support standardized ways to create a new release of a location database. All of them share a conceptual model specifying how the different location categories specified in ISO 17572-1 are related to each other. This specification, together with some guiding literature, helps the community to create new releases of the location database.7.3 Location database provisionAfter finalization of the creation process, the newly created location database is provisioned into the
