1、Earth-moving machinery SafetyPart 5: Requirements for hydraulic excavatorsBS ISO 204745:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06 ISO 2017Earth-moving machinery Safety Part 5: Requirements for hydraulic excavatorsEngins de terrassement Scurit Partie 5: Exi
2、gences applicables aux pelles hydrauliquesINTERNATIONAL STANDARDISO20474-5Second edition2017-07Reference numberISO 20474-5:2017(E)National forewordThis British Standard is the UK implementation of ISO 204745:2017.The UK participation in its preparation was entrusted to Technical Committee B/513/1, E
3、arth moving machinery (International).A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards In
4、stitution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 81824 0ICS 53.100Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2017.Amendments/cor
5、rigenda issued since publicationDate Text affectedBRITISH STANDARDBS ISO 204745:2017 ISO 2017Earth-moving machinery Safety Part 5: Requirements for hydraulic excavatorsEngins de terrassement Scurit Partie 5: Exigences applicables aux pelles hydrauliquesINTERNATIONAL STANDARDISO20474-5Second edition2
6、017-07Reference numberISO 20474-5:2017(E)BS ISO 204745:2017ISO 20474-5:2017(E)ii ISO 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
7、 or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet
8、8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 204745:2017ISO 20474-5:2017(E)ii ISO 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part
9、of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body
10、 in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgISO 20474-5:2017(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 24 Safety re
11、quirements and protective measures . 44.1 General . 44.2 Operator station . 44.2.1 Operator protection 44.2.2 Rear window defrosting system . 54.3 Controls for driving and steering 54.4 Swing brakes . 54.5 Stability and safety devices 54.5.1 General 54.5.2 Bucket and shovel applications . 54.5.3 Obj
12、ect-handling applications 54.6 Specific requirements for walking excavators . 64.6.1 Operator station . 64.6.2 Wheel brake system 64.6.3 Operator protection 74.6.4 Stability 74.6.5 Retrieval and towing 95 Information for use 9Annex A (normative) Requirements for excavator swing brakes 10Annex B (inf
13、ormative) Illustrations13Bibliography .16 ISO 2017 All rights reserved iiiContents PageBS ISO 204745:2017ISO 20474-5:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International
14、 Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, a
15、lso take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1.
16、 In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the el
17、ements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations recei
18、ved (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment,
19、as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .htmlThis document was prepared by Technical Committee ISO/TC 127, Earth-moving machinery, Subcommittee SC 2, Safe
20、ty, ergonomics and general requirements.This second edition cancels and replaces the first edition (ISO 20474-5:2008), which has been technically revised with the following changes: normative references have been updated; references to national and regional provisions in the withdrawn ISO/TS 20474-1
21、4 have been deleted; new safety requirements and protective measures have been added, including requirements for load safety devices and the normative annex, Requirements for excavator swing brakes.It is intended to be used in conjunction with ISO 20474-1.A list of all parts in the ISO 20474 series,
22、 published under the general title, Earth-moving machinery Safety, can be found on the ISO website.iv ISO 2017 All rights reservedBS ISO 204745:2017ISO 20474-5:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member b
23、odies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental a
24、nd non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are d
25、escribed in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is d
26、rawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or o
27、n the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and exp
28、ressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .htmlThis document was prepared by Technical Committee ISO/TC 127, Eart
29、h-moving machinery, Subcommittee SC 2, Safety, ergonomics and general requirements.This second edition cancels and replaces the first edition (ISO 20474-5:2008), which has been technically revised with the following changes: normative references have been updated; references to national and regional
30、 provisions in the withdrawn ISO/TS 20474-14 have been deleted; new safety requirements and protective measures have been added, including requirements for load safety devices and the normative annex, Requirements for excavator swing brakes.It is intended to be used in conjunction with ISO 20474-1.A
31、 list of all parts in the ISO 20474 series, published under the general title, Earth-moving machinery Safety, can be found on the ISO website.iv ISO 2017 All rights reserved ISO 20474-5:2017(E)IntroductionThis document is a type-C standard as stated in ISO 12100.The machinery concerned and the exten
32、t to which hazards, hazardous situations or hazardous events are covered are indicated in the Scope of this document.When requirements of this type-C standard are different from those which are stated in type-A or B standards, the requirements of this type-C standard take precedence over the require
33、ments of the other standards for machines that have been designed and built according to the requirements of this type-C standard.ISO 20474 provides acceptable safety requirements for earth-moving machinery. This standard does not necessarily provide requirements to meet all national and regional re
34、gulatory provisions, e.g. Japan does not allow object handling with earth-moving machinery. ISO 2017 All rights reserved vBS ISO 204745:2017BS ISO 204745:2017Earth-moving machinery Safety Part 5: Requirements for hydraulic excavators1 ScopeThis document gives the safety requirements specific to hydr
35、aulic excavators as defined in ISO 6165. It is intended to be used in conjunction with ISO 20474-1, which specifies general safety requirements common to two or more earth-moving machine families. The specific requirements given in this document take precedence over the general requirements of ISO 2
36、0474-1.This document deals with all significant hazards, hazardous situations and events relevant to the earth-moving machinery within its scope (see ISO 20474-1:2017, Annex A) when used as intended or under conditions of misuse reasonably foreseeable by the manufacturer. It specifies the appropriat
37、e technical measures for eliminating or reducing risks arising from relevant hazards, hazardous situations or events during commissioning, operation and maintenance.This document is not applicable to machines manufactured before the date of its publication.2 Normative referencesThe following documen
38、ts are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 3449:2005, Eart
39、h-moving machinery Falling-object protective structures Laboratory tests and performance requirementsISO 3471, Earth-moving machinery Roll-over protective structures Laboratory tests and performance requirementsISO 6165, Earth-moving machinery Basic types Identification and terms and definitionsISO
40、6682, Earth-moving machinery Zones of comfort and reach for controlsISO 6683, Earth-moving machinery Seat belts and seat belt anchorages Performance requirements and testsISO 7096, Earth-moving machinery Laboratory evaluation of operator seat vibrationISO 7135, Earth-moving machinery Hydraulic excav
41、ators Terminology and commercial specificationsISO 7451, Earth-moving machinery Volumetric ratings for hoe-type and grab-type buckets of hydraulic excavators and backhoe loadersISO 7546, Earth-moving machinery Loader and front loading excavator buckets Volumetric ratingsISO 8643, Earth-moving machin
42、ery Hydraulic excavator and backhoe loader lowering control device Requirements and testsISO 10262, Earth-moving machinery Hydraulic excavators Laboratory tests and performance requirements for operator protective guardsISO 10567, Earth-moving machinery Hydraulic excavators Lift capacityINTERNATIONA
43、L STANDARD ISO 20474-5:2017(E) ISO 2017 All rights reserved 1BS ISO 204745:2017ISO 20474-5:2017(E)ISO 12117, Earth-moving machinery Tip-over protection structure (TOPS) for compact excavators Laboratory tests and performance requirementsISO 12117-2:2008, Earth-moving machinery Laboratory tests and p
44、erformance requirements for protective structures of excavators Part 2: Roll-over protective structures (ROPS) for excavators of over 6 t. Amended by ISO 12117-2:2008/Amd 1:2016ISO 20474-1:2017, Earth-moving machinery Safety Part 1: General requirements3 Terms and definitionsFor the purposes of this
45、 document, the terms and definitions given in ISO 20474-1, ISO 6165 and ISO 7135, and the following apply.ISO and IEC maintain terminological databases for use in standardization at the following addresses: ISO Online browsing platform: available at h t t p :/ www .iso .org/ obp IEC Electropedia: av
46、ailable at h t t p :/ www .electropedia .org/ 3.1excavatorhydraulic excavatorself-propelled machine on crawlers, wheels or legs, having an upper structure normally capable of a 360 swing with mounted equipment (3.3), primarily designed for excavating with bucket, without moving the undercarriage dur
47、ing the work cycleNote 1 to entry: An excavator work cycle normally comprises excavating, elevating, swinging and the discharging of material.Note 2 to entry: An excavator can also be used for object or material handling/transportation.Note 3 to entry: Unless specifically identified as a cable excav
48、ator, an excavator is commonly referred to as a hydraulic excavator.Note 4 to entry: See Annex B for illustrations.SOURCE: ISO 6165:2012, 4.4, modified By adding Note 4.3.1.1compact excavatorexcavator (3.1) with an operating mass 6 000 kg or lessNote 1 to entry: See Annex B for illustrations.SOURCE:
49、 ISO 6165:2012, 4.4.4, modified By adding Note 1.3.1.2walking excavatorexcavator (3.1) with three or more supporting legs which can be articulated, telescopic or both and which can be fitted with wheelsNote 1 to entry: See Annex B for an illustration.SOURCE: ISO 6165:2012, 4.4.2, modified By adding Note 1.3.2extra-long reach equipment applicationapplication of hydraulic excavator (3.1) equipped with extra-long reach equipmentNote 1 to entry:
