1、BS ISO25639-2:2008ICS 01.020NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDExhibitions, shows,fairs and conventionsPart 2: Measurement procedures forstatistical purposesThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCom
2、mittee on 31 December2008 BSI 2008ISBN 978 0 580 58688 0Amendments/corrigenda issued since publicationDate CommentsBS ISO 25639-2:2008National forewordThis British Standard is the UK implementation of ISO 25639-2:2008.The UK participation in its preparation was entrusted to TechnicalCommittee SVS/1/
3、2, Exhibitions and Trade Fairs.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard
4、 cannot confer immunityfrom legal obligations.BS ISO 25639-2:2008Reference numberISO 25639-2:2008(E)ISO 2008INTERNATIONAL STANDARD ISO25639-2First edition2008-11-15Exhibitions, shows, fairs and conventions Part 2: Measurement procedures for statistical purposes Terminologie du secteur des foires, sa
5、lons et congrs ou manifestations commerciales Partie 2: Mthodes de comptage des fins statistiques BS ISO 25639-2:2008ISO 25639-2:2008(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited
6、 unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trad
7、emark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodie
8、s. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO 2008 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any me
9、ans, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copy
10、rightiso.org Web www.iso.org Published in Switzerland ii ISO 2008 All rights reservedBS ISO 25639-2:2008ISO 25639-2:2008(E) ISO 2008 All rights reserved iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). Th
11、e work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-gov
12、ernmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
13、The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vo
14、te. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 25639-2 was prepared by Project Committee ISO/PC 237, Exhibition terminology. ISO 25639 consi
15、sts of the following parts, under the general title Exhibitions, shows, fairs and conventions: Part 1: Vocabulary Part 2: Measurement procedures for statistical purposes BS ISO 25639-2:2008ISO 25639-2:2008(E) iv ISO 2008 All rights reservedIntroduction In the context of the exhibition industry, ISO
16、25639-1 fulfils the important basic function in standardization of specifying commonly-used terms and definitions. Of equal importance is establishing standard measurement procedures applicable to the terms defined in ISO 25639-1, in order to ensure uniformity in interpretation. This part of ISO 256
17、39 fulfils the latter function and is consequently intended for integral use with ISO 25639-1. BS ISO 25639-2:2008INTERNATIONAL STANDARD ISO 25639-2:2008(E) ISO 2008 All rights reserved 1Exhibitions, shows, fairs and conventions Part 2: Measurement procedures for statistical purposes 1 Scope This pa
18、rt of ISO 25639 establishes standard measurement procedures applicable to terms commonly used in the exhibition industry, as defined in ISO 25639-1. This part of ISO 25639 is intended for integral use with ISO 25639-1. 2 Normative references The following referenced documents are indispensable for t
19、he application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 25639-1, Exhibitions, shows, fairs and conventions Part 1: Vocabulary 3 Terms and definitions For the p
20、urposes of this document, the terms and definitions given in ISO 25639-1 apply. 4 Individual and entity 4.1 General This clause specifies standard measurement procedures applicable to terms of the category “individual and entity”. 4.2 Exhibitor The measurement of the number of exhibitors shall be su
21、pported by the contractual document between the organizer and the main exhibitor. 4.3 Main exhibitor The measurement of the number of main exhibitors shall be supported by the contractual document between the organizer and the main exhibitor. BS ISO 25639-2:2008ISO 25639-2:2008(E) 2 ISO 2008 All rig
22、hts reserved4.4 Co-exhibitor The measurement of the number of co-exhibitors shall be supported by the submission of data made by the main exhibitor to the organizer. 4.5 International exhibitor The measurement of the number of international exhibitors shall be supported by the contractual document b
23、etween the organizer and the main exhibitor. 4.6 National exhibitor The measurement of the number of national exhibitors shall be supported by the contractual documents or declaration made by the exhibitor to the organizer. 4.7 Exhibitor staff The measurement of the number of exhibitor staff shall b
24、e supported by the number of exhibitor badges issued for the exhibitors. 4.8 Represented company The measurement of the number of represented companies shall be supported by the documentation submitted by the main exhibitor to the organizer. 4.9 Visit The measurement of the number of visits shall be
25、 supported by the organizers registration and/or entry control system. 4.10 Visitor The measurement of the number of visitors shall be supported by the organizers registration and/or entry control system. Each visitor shall be counted only once for the duration of exhibition. 4.11 Trade visitor The
26、measurement of the number of trade visitors shall be supported by the organizers registration and entry control system. NOTE In the absence of a registration system, the measurement of the number of trade visitors can be done through an independent and audited visitor survey conducted onsite. 4.12 G
27、eneral public visitor The measurement of the number of general public visitors shall be supported by the organizers registration and entry control system. NOTE In the absence of a registration system, the measurement of the number of general public visitors can be done through an independent and aud
28、ited visitor survey conducted onsite. 4.13 International visitor The measurement of the number of international visitors shall be supported by the organizers registration and entry control system. BS ISO 25639-2:2008ISO 25639-2:2008(E) ISO 2008 All rights reserved 3NOTE In the absence of a registrat
29、ion system, the measurement of the number of international visitors can be done through an independent and audited visitor survey conducted onsite. 4.14 National visitor The measurement of the number of national visitors shall be supported by the organizers registration and entry control system. NOT
30、E In the absence of a registration system, the measurement of the number of national visitors can be done through an independent and audited visitor survey conducted onsite. 4.15 Hosted visitor The measurement of the number of hosted visitors shall be supported by the organizers registration and/or
31、entry control system. 4.16 Delegate The measurement of the number of delegates shall be supported by the organizers registration and/or entry control system. 4.17 International delegate The measurement of the number of international delegates shall be supported by the organizers registration and/or
32、entry control system. 4.18 National delegate The measurement of the number of national delegates shall be supported by the organizers registration and/or entry control system. 4.19 Accompanying person The measurement of the number of accompanying persons shall be supported by the organizers registra
33、tion and/or entry control system. 4.20 Media representative The measurement of the number of media representatives shall be supported by the organizers registration and/or entry control system. Each media representative shall be counted only once for duration of exhibition. 4.21 Attendee The measure
34、ment of the number of attendees shall be supported by the measurements as defined elsewhere in this part of ISO 25639. Each attendee shall be counted once only for duration of exhibition. 4.22 Total attendance The measurement of total attendance and the breakdown of admission categories shall be sup
35、ported by the measurements as defined elsewhere in this part of ISO 25639. BS ISO 25639-2:2008ISO 25639-2:2008(E) 4 ISO 2008 All rights reserved5 Types of events 5.1 General This clause specifies standard measurement procedures applicable to terms of the category “types of events”. 5.2 International
36、 exhibition The measurement of the number of international exhibitions shall be supported by the organizers registration system and/or entry control system and/or the contracts between the organizer and the main exhibitor. 6 Physical item 6.1 General This clause specifies standard measurement proced
37、ures applicable to terms of the category “physical item”. 6.2 Booth space The measurement of the size of booth space shall be supported by the contractual document between organizer and the exhibitor. It can be cross-checked by actual floor measurements or through scaled drawings. 6.3 Raw space The
38、measurement of the size of raw space shall be supported by the contractual document between the organizer and the main exhibitor. 6.4 Contra booth The measurement of the number of contra booths shall be supported by the contractual document between the organizer and the main exhibitor. 6.5 Gross ind
39、oor exhibition venue space The measurement of the size of gross indoor exhibition venue space shall be supported by scaled drawings of the venue. 6.6 Gross outdoor exhibition venue space The measurement of the size of gross outdoor exhibition venue space shall be supported by scaled drawings of the
40、venue. 6.7 Rented exhibition space The measurement of the size of rented exhibition space shall be supported by the contractual document between the organizer and the exhibitor. It can be cross-checked by actual floor measurements or through scaled drawings. 6.8 Gross exhibition space The measuremen
41、t of the size of gross exhibition space shall be supported by the contractual document between the organizer and the venue. It can be cross-checked by actual floor measurements or through scaled drawings. BS ISO 25639-2:2008ISO 25639-2:2008(E) ISO 2008 All rights reserved 56.9 Net exhibition space T
42、he measurement of the size of net exhibition space shall be supported by the contractual document between the organizer and the exhibitor. The featured areas and booth space can be cross-checked by actual floor measurements or through scaled drawings. 7 Miscellaneous 7.1 General This clause specifie
43、s standard measurement procedures applicable to terms of the category “miscellaneous”. 7.2 Duration of exhibition The measurement of the duration of exhibition shall be supported by the imprints on the exhibitions documents. BS ISO 25639-2:2008ISO 25639-2:2008(E) ICS 01.020 Price based on 5 pages IS
44、O 2008 All rights reserved BS ISO 25639-2:2008This page has been intentionally left blank BS ISO25639-2:2008BSI GroupHeadquarters 389Chiswick High Road,London, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards InstitutionBSI is the independent national body responsible for pre
45、paring BritishStandards. It presents the UK view on standards in Europe and at theinternational level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments oreditions.It
46、 is the constant aim of BSI to improve the quality of our products and services.We would be grateful if anyone finding an inaccuracy or ambiguity while usingthis British Standard would inform the Secretary of the technical committeeresponsible, the identity of which can be found on the inside front
47、cover. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should bead
48、dressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89967001 Email: You may also buy directly using a debit/creditcard from the BSI Shop on the Website http:/ response to orders for international standards, it is BSI policy to supply theBSI implementation of those that have been published as British Standards,unless otherwise requested.Information on standardsBSI provides a wide range of information on nat
