1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58loops Part 1: Dimensions of healds manufactured of rolled steel wireICS 59.120.30Textile machinery
2、and accessories Flat steel healds with closed end BRITISH STANDARDBS ISO 363-1:2006BS ISO 363-1:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2006 BSI 2006ISBN 0 580 49627 9Amendments issued since publicationAmd. No. Date Co
3、mmentsThis publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.National forewordThis British Standard was published by BSI. It is the UK
4、implementation of ISO 363-1:2006. This standard, together with BS ISO 363-2:2006 supersedes BS ISO 363:1992.The UK participation in its preparation was entrusted to Technical Committee TCI/33, Textile machinery. A list of organizations represented on TCI/33 can be obtained on request to its secretar
5、y.Reference numberISO 363-1:2006(E)INTERNATIONAL STANDARD ISO363-1First edition2006-03-15Textile machinery and accessories Flat steel healds with closed end loops Part 1: Dimensions of healds manufactured of rolled steel wire Matriel pour lindustrie textile Lisses en acier plat avec boucles dextrmit
6、s fermes Partie 1: Dimensions des lisses fabriques en fils dacier lamin BS ISO 363-1:2006ii iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carri
7、ed out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. I
8、SO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare Internati
9、onal Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the el
10、ements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 363-1 was prepared by Technical Committee ISO/TC 72, Textile machinery and accessories, Subcommittee SC 3, Machinery for fabric manufacturing including pr
11、eparatory machinery and accessories. This first edition of ISO 363-1 cancels and replaces ISO 363:1992, of which it constitute a technical revision. ISO 363 consists of the following parts, under the general title Textile machinery and accessories Flat steel healds with closed end loops: Part 1: Dim
12、ensions of healds manufactured of rolled steel wire Part 2: Dimensions of healds manufactured of hardened strip steel BS ISO 363-1:2006blank1Textile machinery and accessories Flat steel healds with closed end loops Part 1: Dimensions of healds manufactured of rolled steel wire 1 Scope This part of I
13、SO 363 specifies the main dimensions of flat steel healds with closed end loops, manufactured of rolled steel wire for use in the textile industry. 2 Dimensions See Figure 1 and Table 1. BS ISO 363-1:20062 Dimensions in millimetres Key 1 straight healds SIMPLEX 2 cranked healds DUPLEX 3 end loop off
14、set 4 thread eye aOn some weaving machines, the transverse centreline of the thread eyes is at a distance of L/2 instead of (L/2) 10. bThe healds can be ordered with corrugated end loops at the upper end and flat end loops at the lower end; such healds are recommended for USTERautomatic drawing-in m
15、achines. (USTER are examples of suitable products available commercially. This information is given for the convenience of users of this part of ISO 363 and does not constitute an endorsement by ISO of these products.) cSection enlarged. dDirection of eye: open to the right, R. eSharp edges. Figure
16、1 BS ISO 363-1:20063Table 1 Dimensions in millimetres Cross-section of heald aDimension of thread eye Distance between end loops b s l2b1L 2 0,25 5 1 280 330 2,2 0,3 5,5 1,2 280 330 2,5 0,35 6 1,5 280 330 380 420 2,8 0,4 6,5 1,8 280 330 380 420 aFor certain methods of manufacture, slight deviations
17、from the dimensions are permissible. BS ISO 363-1:2006BS ISO BSI389 Chiswick High RoadLondonW4 4AL363-1:2006BSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level
18、. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be gratef
19、ul if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updat
20、ing service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: orde
21、rsbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a w
22、ide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)
23、20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002
24、. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also
25、 holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, reco
26、rding or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.
