1、Plastics Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sourcesBS ISO 4582:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06 ISO 2017Plastics Determinatio
2、n of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sourcesPlastiques Dtermination des changements de coloration et des variations de proprits aprs exposition au rayonnement solaire sous verre, aux agents at
3、mosphriques ou aux sources de rayonnement de laboratoireINTERNATIONAL STANDARDISO4582Fourth edition2017-08Reference numberISO 4582:2017(E)National forewordThis British Standard is the UK implementation of ISO 4582:2017. It supersedes BS 27825:Method 552A:1999, which is withdrawn.The UK participation
4、 in its preparation was entrusted to Technical Committee PRI/21, Testing of plastics.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for it
5、s correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 88547 1ICS 83.080.01Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and
6、 Strategy Committee on 30 September 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS ISO 4582:2017 ISO 2017Plastics Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laborator
7、y radiation sourcesPlastiques Dtermination des changements de coloration et des variations de proprits aprs exposition au rayonnement solaire sous verre, aux agents atmosphriques ou aux sources de rayonnement de laboratoireINTERNATIONAL STANDARDISO4582Fourth edition2017-08Reference numberISO 4582:20
8、17(E)BS ISO 4582:2017ISO 4582:2017(E)ii ISO 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanica
9、l, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, Switzerl
10、andTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 4582:2017ISO 4582:2017(E)ii ISO 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utili
11、zed otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright
12、 officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgISO 4582:2017(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 14 Determination of changes in colour or other appearance att
13、ributes . 24.1 General . 24.2 Changes in colour . 24.2.1 Principles 24.2.2 Apparatus . 34.2.3 Test specimens. 34.2.4 Procedure . 34.3 Changes in other appearance properties . 55 Determination of changes in mechanical or other properties . 55.1 Principles . 55.2 Apparatus 65.3 Test specimens 65.4 Pro
14、cedure 65.4.1 Determination of initial properties 65.4.2 Storage of file specimens 65.4.3 Determination of properties after exposure 76 Expression of results 76.1 Changes in colour . 76.1.1 Instrumental measurements . 76.1.2 Visual assessment . 76.2 Changes in other appearance properties . 76.2.1 In
15、strumental measurements . 76.2.2 Visual assessment of change in appearance attributes 86.2.3 Changes in mechanical and other properties . 87 Precision . 98 Test report . 9Annex A (normative) Statistical formulae based on ISO 2602 for determination of mean and standard deviation and procedure for det
16、ermination of time to 50 % loss of property .10Annex B (informative) Possible effects of surface cleaning on assessment of exposure 15Bibliography .16 ISO 2017 All rights reserved iiiContents PageBS ISO 4582:2017ISO 4582:2017(E)ForewordISO (the International Organization for Standardization) is a wo
17、rldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented o
18、n that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this
19、document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Dire
20、ctives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the dev
21、elopment of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary n
22、ature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .htmlThis
23、document was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 6, Ageing, chemical and environmental resistance.This fourth edition cancels and replaces the third edition (ISO 4582:2007), which has been technically revised. The main changes compared to the previous edition are as
24、follows: due to the withdrawal of all parts of ISO 7724, the colour measurement procedure has been revised.iv ISO 2017 All rights reservedBS ISO 4582:2017ISO 4582:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO membe
25、r bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmenta
26、l and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance ar
27、e described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention i
28、s drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/o
29、r on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
30、expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .htmlThis document was prepared by Technical Committee ISO/TC 61, Pl
31、astics, Subcommittee SC 6, Ageing, chemical and environmental resistance.This fourth edition cancels and replaces the third edition (ISO 4582:2007), which has been technically revised. The main changes compared to the previous edition are as follows: due to the withdrawal of all parts of ISO 7724, t
32、he colour measurement procedure has been revised.iv ISO 2017 All rights reserved ISO 4582:2017(E)IntroductionA number of different exposure techniques can be used to provide information on the effects of environmental stresses such as simulated solar radiation, heat and water on plastics see ISO 877
33、 (all parts) and ISO 4892 (all parts). Each exposure test has its own particular application and relevance. When determining changes in a particular property or attribute of a material subjected to different exposures, the same evaluation methods should be used after all exposures to ensure meaningf
34、ul results.Results for plastics subjected to exposure tests are strongly dependent on the type of exposure conditions used, the type of plastic being tested and the property being evaluated. A result obtained for one property may not be the same as that for a different property of the same material,
35、 even if the same exposure test is used. This document is not intended to establish a fixed procedure for conducting the exposure test, but is intended to provide a set of specific procedures used to express the results for change in a characteristic property of the material after it has been expose
36、d. It is up to the user to determine which exposure conditions are most relevant to the specific material and the service conditions being used.Test methods should be selected to determine changes in appearance and properties of the exposed material with its proposed application in mind. The exposur
37、e test used should be devised to discriminate among materials based on such changes. This document suggests typical properties that can be used to determine changes in plastics which have been subjected to exposure tests.NOTE Because of large differences in the spectral distribution of the radiation
38、 sources used, there can be large differences in results for the same plastics exposed in the various devices described in ISO 4892 (all parts). Therefore, comparisons between plastics are intended to be made only based on results from exposures in the same type of device and under the same conditio
39、ns. For optimum comparisons, plastics are expected to be exposed at the same time in the same device. ISO 2017 All rights reserved vBS ISO 4582:2017Plastics Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laborat
40、ory radiation sources1 ScopeThis document specifies methods to determine changes in colour and other appearance properties, and variations in mechanical or other properties, of plastics that have been exposed to glass-filtered solar radiation, to natural weathering or to simulated solar radiation fr
41、om a laboratory source. The procedure used to analyse data depends on whether the test used to characterize the materials being exposed is destructive or non-destructive. The exposures are conducted under conditions described in specific exposure standards.2 Normative referencesThe following documen
42、ts are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 105-A01, Textil
43、es Tests for colour fastness Part A01: General principles of testingISO 105-A02, Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colourISO 105-A03, Textiles Tests for colour fastness Part A03: Grey scale for assessing stainingISO 291, Plastics Standard atmospheres for
44、 conditioning and testingISO 2602, Statistical interpretation of test results Estimation of the mean Confidence intervalISO 10640, Plastics Methodology for assessing polymer photoageing by FTIR and UV/visible spectroscopyISO 11664-1, Colorimetry Part 1: CIE standard colorimetric observersISO 11664-2
45、, Colorimetry Part 2: CIE standard illuminantsISO 11664-3, Colorimetry Part 3: CIE tristimulus valuesISO 11664-4, Colorimetry Part 4: CIE 1976 L*a*b* Colour spaceCIE Publication No. 15, Colorimetry3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.ISO
46、 and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at h t t p :/ www .electropedia .org/ ISO Online browsing platform: available at h t t p :/ www .iso .org/ obpINTERNATIONAL STANDARD ISO 4582:2017(E) ISO 2017 All rights rese
47、rved 1BS ISO 4582:2017Plastics Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources1 ScopeThis document specifies methods to determine changes in colour and other appearance properties, an
48、d variations in mechanical or other properties, of plastics that have been exposed to glass-filtered solar radiation, to natural weathering or to simulated solar radiation from a laboratory source. The procedure used to analyse data depends on whether the test used to characterize the materials bein
49、g exposed is destructive or non-destructive. The exposures are conducted under conditions described in specific exposure standards.2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 105-A01, Textiles Tests for colour