1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS ISO 603-12:1999 ICS 25
2、.100.70 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Bonded abrasive products Dimensions Part 12: Grinding wheels for deburring and fettling on a straight grinderThis British Standard, having been prepared under the direction of the Engineering Sector Committee, was publish
3、ed under the authority of the Standards Committee and comes into effect on 15 November 1999 BSI 11-1999 ISBN 0 580 35708 2 BS ISO 603-12:1999 Amendments issued since publication Amd. No. Date Comments National foreword This British Standard reproduces verbatim ISO 603-12:1999 and implements it as th
4、e UK national standard. The UK participation in its preparation was entrusted to Technical Committee MTE/13, Grinding wheels, abrasive tools, paper, cloths and powder, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee a
5、ny enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references
6、The British Standards which implement international publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British St
7、andard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cove
8、r, an inside front cover, the ISO title page, pages ii and iii, a blank page, pages 1 to 6, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued.A Referencenumbe r ISO60312:1999 (E) INTERNATIONAL STANDARD ISO 60312 Fir
9、stedition 19990715 Bondedabrasiveproducts Dimensions Part12: Grindingwheelsfordeburringandfettling onastraightgrinder ProduitsabrasifsagglomrsDimensions Partie12:Meulespourbarbageetbavuragesurmeuleusesportatives droitesISO60312:1999(E) ii Contents Page 1Scop e1 2Normativereference s1 3Dimension s.2
10、3.1Type1:Straightgrindingwhee l2 3.2Type4:Wheeltaperedonbothside s.3 3.3Type16:Cylindricalplug,taperedcon e.4 3.4Type18:Cylindricalplug,flaten d4 3.5Type18R:Cylindricalplug,rounden d.4 3.6Type19:Cylindricalplug,taperrollshape d4 4Designatio n5 5Specification s.5 5.1Tolerance s.5 5.2Balancin g.5 5.3M
11、arkin g5 Bibliography6 ISO60312:1999(E) iii Foreword ISO (the InternationalOrganizationforStandardization)isaworldwidefederationofnationalstandardsbodies(ISO memberbodies).TheworkofpreparingInternationalStandardsisnormallycarriedoutthroughISOtechnical committees.Eachmemberbodyinterestedinasubjectfor
12、whichatechnicalcommitteehasbeenestablishedhas therighttoberepresentedonthatcommittee.Internationalorganizations,governmentalandnongovernmental,in liaisonwithISO,alsotakepartinthework.ISOcollaboratescloselywiththeInternationalElectrotechnical Commission(IEC)onallmattersofelectrotechnicalstandardizati
13、on. InternationalStandardsaredraftedinaccordancewiththerulesgivenintheISO/IECDirectives,Part3. DraftInternationalStandardsadoptedbythetechnicalcommitteesarecirculatedtoth ememberbodiesforvoting. PublicationasanInternationalStandardrequiresapprovalbyatleast75%ofthememberbodiescastingavote. Internatio
14、nalStandardISO60312waspreparedbyTechnicalCommitteeISO/TC29, Smalltools,subcommittee SC5, Grindingwheelsandabrasives . Thisfirstedition,togetherwithISO6031:1999toISO60311:1999an dISO60313:1999toISO60316:1999, cancelsandreplacesISO/R603:1967,ISO6032:1981,ISO1117:1975,ISO2220:1972,ISO2933:1974, ISO3290
15、:1976andISO3921:1976asatechnicalrevisionofthesestandards. ISO603consistsofthefollowingparts,underthegeneraltitle BondedabrasiveproductsDimensions : Part1:Grindingwheelsforexternalcylindricalgrindingbetweencentres Part2:Grindingwheelsforcentrelessexternalcylindricalgrinding Part3:Grindingwheelsforint
16、ernalcylindricalgrinding Part4:Grindingwheelsforsurfacegrinding/peripheralgrinding Part5:Grindingwheelsforsurfacegrinding/facegrinding Part6:Grindingwheelsfortoolandtoolroomgrinding Part7:Grindingwheelsformanuallyguidedgrinding Part8:Grindingwheelsfordeburringandfettling/snagging Part9:Grindingwheel
17、sforhighpressuregrinding Part10:Stonesforhoningandsuperfinishings Part11:Handfinishingsticks Part12:Grindingwheelsfordeburringandfettlingonastraightgrinder Part13:Grindingwheelsfordeburringandfettlingonaverticalgrinder Part14:Grindingwheelsfordeburringandfettling/snaggingonananglegrinder Part15:Grin
18、dingwheelsforcuttingoffonstationaryormobilecuttingoffmachines Part16:GrindingwheelsforcuttingoffonhandheldpowertoolsINTERNATIONALSTANDARD ISO60312:1999(E) 1 BondedabrasiveproductsDimensions Part12: Grindingwheelsfordeburringandfettlingonastraightgrinder 1Scope ThispartofISO603specifiesthenominaldime
19、nsions,inmillimeters,of: Type1:Straightgrindingwheel Type4:Wheeltaperedonbothsides Type16:Cylindricalplug,taperedcone Type18:Cylindricalplug,flatend Type18R:Cylindricalplug,roundend Type19:Cylindricalplug,taperrollshaped These bonded abrasive products areintendedtobeusedfordeburringandfettlingofanys
20、urfacesofaworkpiece usinghandheldgrindingmachines(straightgrinder).Theworkpieceisfixed,thegrindingmachineisguidedby hand. 2Normativereferences The followingnormativedocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsof thispartofISO 603.Fordatedreferences,subsequentamendm
21、entsto,orrevisionsof,anyofthesepublicationsdo notapply.However,partiestoagreementsbasedonthispartofISO 603areencouragedtoinvestigatethe possibilityofapplyingthemostrecenteditionsofthenormativedocumentsindicatedbelow .Forundated references,thelateseditionofthenormativedocumentreferredtoapplies.Member
22、sofISOandIECmaintain registersofcurrentlyvalidInternationalStandards. ISO525:1999, BondedabrasiveproductsGeneralrequirements . ISO6103:1999, BondedabrasiveproductsStaticbalancingofgrindingwheelsTesting . ISO13942: 1) , BondedabrasiveproductsLimitdeviationsandrunouttolerances. 1) Tobepublished.ISO603
23、12:1999(E) 2 3Dimensions 3.1Type1:Straightgrindingwheel SeeFigure1andTable1. Figure1Type1 Table1DimensionsofType1 DTH 32 10 8 40 10 10 10 50 13 10 20 63 10 13 16 20 10 80 10 20 25 32 13 100 20 25 32 40 16 100 20 25 32 40 20 125 20 25 32 40 16 125 20 25 32 40 20 DTH 125 20 25 32 40 32 150 20 25 32 40
24、 16 150 20 25 32 40 20 150 20 25 32 40 32 180 20 25 32 40 20 180 20 25 32 40 32 200 25 32 20 200 25 32 32 ISO60312:1999(E) 3 3.2Type4:Wheeltaperedonbothsides SeeFigure2andTable2. Figure2Type4 Table2DimensionsofType4 DTHU 80 20 25 16 21 100 20 25 15 20 125 20 25 20 14 19 150 20 25 13 18 180 25 17 200
25、 25 32 16ISO60312:1999(E) 4 3.3Type16:Cylindricalplug,taperedcone SeeFigure3andTable3. 3.4Type18:Cylindricalplug,flatend SeeFigure4andTable3. 3.5Type18R:Cylindricalplug,roundend SeeFigure5andTable3. 3.6Type19:Cylindricalplug,taperroll shaped SeeFigure6andTable3. Figure3Type16 Figure4Type18 Figure5Ty
26、pe18R Figure6Type19 Table3DimensionsofType16,Type18,Type18RandType19 Type DT HH 1 JLR 1 32 40 50 63 M10 M12 12 14 10 16 20 50 80 M12 M14 14 16 13 16 63 63 80 100 M16 18 16 25 30 80 80 100 20 25 30 32 40 50 M10 12 16 40 18and 40 50 M12 14 18R 63 20 50 50 80 M12 M14 14 16 63 80 63 80 80 M16 18 25 40 6
27、3 M12 14 20 190 19 63 80 80 80 M16 18 25 25 165 150 ISO60312:1999(E) 5 4Designation A complete designation ofa bonded abrasive product in accordancewiththispartofISO 603shallbeconsistofthe followinginformation: a) b) designationofthebondedabrasives,e.g.Grindingwheel; referenceofthispartofISO603; c)
28、d) e) f) type(shape); dimensions; specificationsofaninternalnature; themaximumoperatingspeed. InaccordancewithISO525 andthispartofISO603 EXAMPLE Agrindingwheelfordeburring,Typ e 1,D=150mm ,T=25mm ,H=20mm ,natureofabrasiveA ,grainsize24, gradeQ,structure5,natureofbondBandamaximumoperatingspeedof50m/s
29、isdesignatedasfollows: GrindingwheelISO603121150 325 320A24Q5B50m/s 5Specifications Thespecificationsarelefttothemanufacturesdiscretion,seeISO525. 5.1Tolerances LimitdeviationsandrunouttolerancesinaccordancewithISO13942. 5.2Balancing BalancingisinaccordancewithISO6103. 5.3Marking Markingofbondedabra
30、siveproductsisinaccordancewithISO525.ISO60312:1999(E) 6 Bibliography 1ISO84861, BondedabrasivesDeterminationanddesignationofgrainsizedistributionPart1:MacrogritsF4 toF220 . 2ISO84862, BondedabrasivesDeterminationanddesignationofgrainsizedistributionPart2:Microgrits F230toF1200 .BS ISO 603-12:1999 BS
31、I 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI Bri
32、tish Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of
33、British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of
34、 the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying stan
35、dards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as Briti
36、sh Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give det
37、ails on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits cont
38、act Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988
39、 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details suc
40、h as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.
