1、Buildings and civil engineering works VocabularyPart 3: Sustainability termsBS ISO 67073:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06 ISO 2017Buildings and civil engineering works Vocabulary Part 3:Sustainability termsBatiments et ouvrages de genie civil Voca
2、bulaire Partie 3: Termes relatifs a la durabiliteINTERNATIONALSTANDARDISO6707-3First edition2017-08Reference numberISO 6707-3:2017(E)National forewordThis British Standard is the UK implementation of ISO 67073:2017.The UK participation in its preparation was entrusted to Technical Committee CB/101/2
3、, Basic Data Terminology.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 201
4、7 Published by BSI Standards Limited 2017ISBN 978 0 580 87865 7ICS 01.040.91; 91.010.20Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2017.Amendme
5、nts/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS ISO 67073:2017 ISO 2017Buildings and civil engineering works Vocabulary Part 3: Sustainability termsBatiments et ouvrages de genie civil Vocabulaire Partie 3: Termes relatifs a la durabiliteINTERNATIONAL STANDARDISO6707-3Fir
6、st edition2017-08Reference numberISO 6707-3:2017(E)BS ISO 67073:2017ISO 6707-3:2017(E)ii ISO 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in
7、any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Bla
8、ndonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 67073:2017ISO 6707-3:2017(E)ii ISO 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no
9、 part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs membe
10、r body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgISO 6707-3:2017(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 13.1 Ba
11、se terms. 13.2 Entities . 23.3 Products, components 33.4 Activities, processes, methods, persons 53.5 Resources . 93.6 Conditions, phenomena 133.7 Properties: Ability, performance, indicators, requirements, measures 17Bibliography .24Alphabetical index .26 ISO 2017 All rights reserved iiiContents Pa
12、geBS ISO 67073:2017ISO 6707-3:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body i
13、nterested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechn
14、ical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO do
15、cuments should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held resp
16、onsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information gi
17、ven for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) princ
18、iples in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html.This document was prepared by Technical Committee ISO/TC 59, Buildings and civil engineering works, Subcommittee SC 2, Terminology and harmonization of languages.A list of all parts in the ISO 67
19、07 series can be found on the ISO website.iv ISO 2017 All rights reservedBS ISO 67073:2017ISO 6707-3:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is no
20、rmally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in
21、 the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular t
22、he different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this d
23、ocument may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .is
24、o .org/ patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as infor
25、mation about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html.This document was prepared by Technical Committee ISO/TC 59, Buildings and civil engineering works, Subcommittee SC 2, Termi
26、nology and harmonization of languages.A list of all parts in the ISO 6707 series can be found on the ISO website.iv ISO 2017 All rights reserved ISO 6707-3:2017(E)IntroductionWith the growth in the number of international construction projects and the development of the international market in const
27、ruction products, there is an increasing need for agreement on a common language.ISO 6707-1 defines general terms related to buildings and civil engineering works. This document establishes preferred terms and concepts related to sustainability for buildings and other types of construction works. Co
28、mmunication is important to the implementation and operation of the concept of sustainable development related to building and civil engineering. In the interest of common understanding and standardization, consistent word usage is encouraged to help eliminate the major barrier to effective technica
29、l communication.The preparation of this document was undertaken under the administrative direction of ISO/TC 59/SC 2, but the development work was undertaken by a joint working group of ISO/TC 59/SC 2 and ISO/TC 59/SC 17.This document presents a mix of terms and definitions, some of which are repeat
30、ed from other ISO publications, while others are those that have been derived from ISO standards on environmental management and environmental life cycle assessment. Derivations have been performed carefully in order to maintain the original intention, but to enable interpretation to the context of
31、sustainability and sustainable development related to buildings and civil engineering works.This document does not contain a complete list of terms of relevance to the thematic field, but focuses on concepts that have been standardized and/or applied through publication of individual standards withi
32、n ISO/TC 59/SC 17 and on terms and definitions of concepts frequently encountered in the literature related to sustainability in buildings and other types of construction works.Attention has been paid to how the terms selected have been used in ISO standards and European standards so as to maintain
33、the original intention.ISO/TR 21932 was one of the principle sources employed. Although informative in nature, it contains terms and definitions of concepts that have been applied and standardized in the documents developed to date under ISO/TC 59/SC 17, as well as other terms and definitions that c
34、onstitute work in progress within SC 17 or established within CEN/TC 350 (given in Annexes B and C).A related vocabulary on terms under ISO/TC 268: ISO 37102 is expected to focus on concepts that have been standardized and/or applied through publications within ISO/TC 268.This document is intended t
35、o be used in conjunction with ISO 6707-1. ISO 2017 All rights reserved vBS ISO 67073:2017Buildings and civil engineering works Vocabulary Part 3: Sustainability terms1 ScopeThis document establishes preferred terms and definitions for concepts applicable to sustainability and sustainable development
36、 related to buildings and civil engineering works.NOTE It focuses on concepts that have been standardized and/or applied through publication of individual International Standards within ISO/TC 59/SC 17 and on terms and definitions of concepts frequently encountered in the literature of buildings and
37、 other types of construction works that relate to sustainable development.2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For und
38、ated references, the latest edition of the referenced document (including any amendments) applies.ISO 6707-1, Buildings and civil engineering works Vocabulary Part 1: General terms3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 6707-1 and the followin
39、g apply.ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at h t t p :/ www .electropedia .org/ ISO Online browsing platform: available at h t t p :/ www .iso .org/ obpNOTE Where terms in definitions are defined in this d
40、ocument, the relevant terms are in italics, and the term number is given after the relevant term. Where terms in definitions are defined in ISO 6707-1, the terms are also in italics but no term number is given.3.1 Base terms3.1.1sustainable developmentdevelopment that meets the environmental, social
41、 and economic needs of the present without compromising the ability of future generations to meet their own needsSOURCE: ISO Guide 82:2014, 3.2, modified Note 1 to entry has been removed.3.1.2sustainabilitystate of the global system, including environmental, social and economic aspects in which the
42、needs of the present are met without compromising the ability of future generations to meet their own needsNote 1 to entry: The environmental, social and economic aspects interact and are interdependent and are often referred to as the three dimensions of sustainability.Note 2 to entry: Sustainabili
43、ty is the goal of sustainable development (3.1.1).INTERNATIONAL STANDARD ISO 6707-3:2017(E) ISO 2017 All rights reserved 1BS ISO 67073:2017Buildings and civil engineering works Vocabulary Part 3: Sustainability terms1 ScopeThis document establishes preferred terms and definitions for concepts applic
44、able to sustainability and sustainable development related to buildings and civil engineering works.NOTE It focuses on concepts that have been standardized and/or applied through publication of individual International Standards within ISO/TC 59/SC 17 and on terms and definitions of concepts frequen
45、tly encountered in the literature of buildings and other types of construction works that relate to sustainable development.2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated r
46、eferences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 6707-1, Buildings and civil engineering works Vocabulary Part 1: General terms3 Terms and definitionsFor the purposes of this document, the terms an
47、d definitions given in ISO 6707-1 and the following apply.ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at h t t p :/ www .electropedia .org/ ISO Online browsing platform: available at h t t p :/ www .iso .org/ obpNOT
48、E Where terms in definitions are defined in this document, the relevant terms are in italics, and the term number is given after the relevant term. Where terms in definitions are defined in ISO 6707-1, the terms are also in italics but no term number is given.3.1 Base terms3.1.1sustainable developme
49、ntdevelopment that meets the environmental, social and economic needs of the present without compromising the ability of future generations to meet their own needsSOURCE: ISO Guide 82:2014, 3.2, modified Note 1 to entry has been removed.3.1.2sustainabilitystate of the global system, including environmental, social and economic aspects in which the needs of the present are met without compromising the ability of future generations to meet their own needsNote 1 to entry: The environmental, social
