1、BRITISH STANDARD BS ISO/IEC 11587:1996 Information technology Open Systems Interconnection Application Context for Systems Management with Transaction Processing (ITU-T Rec. X.702 (1995)| ISO/IEC 11587:1996) ICS 35.100.70BS ISO/IEC 11587:1996 This British Standard, having been prepared under the dir
2、ection of the DISC Board, waspublished under the authority of the Standards Board and comes into effect on 15 November 1996 BSI 11-1998 ISBN 0 580 26560 9 National foreword This British Standard reproduces verbatim ISO/IEC 11587:1996, and implements it as the UK national standard. The UK participati
3、on in its preparation was entrusted to Technical Committee IST/21, Open Systems Interconnection, Data Management and Open Distributed Processing, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the in
4、terpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee is available on request. Cross-references The British Standards which implement inte
5、rnational or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to includ
6、e all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, theISO/
7、IECtitle page, pages ii to iv, pages 1 to 8, an inside back cover andaback cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on theinside front cover. Amendments issued since publication Amd. No. Date Co
8、mmentsBS ISO/IEC 11587:1996 ii BSI 11-1998 Contents Page Foreword iii 1 Scope 1 2 Normative references 1 2.1 Identical Recommendations|International Standards 1 2.2 Paired Recommendations|International Standards equivalent in technical content 1 2.3 Additional references 2 3 Abbreviations 2 4 Applic
9、ation context name 3 5 Component ASEs and ASOs 3 5.1 ACSE 3 5.2 ROSE 3 5.3 CMISE 3 5.4 SMASE 3 5.5 TPASE 3 5.6 CCR 3 6 Persistent application context rules 3 7 Control function (SACF/MACF) rules 3 7.1 Objectives/summary 4 7.2 Temporal ordering rules 4 7.3 Concatenation rules 4 7.4 References to base
10、 standard rules 4 7.5 Other rules 4 8 Optional features 5 9 Error handling 5 10 Conformance 5 Annex A Commentaries 6 Annex B Scenarios 7 Annex B.1 Example use of Handshake and Shared Control functional units 7 Annex B.2 Example use of Commit functional unit for provider-supported transactions 7 Anne
11、x B.3 Another example use of Commit functional unit for provider-supported transactions 8BS ISO/IEC 11587:1996 BSI 11-1998 iii Foreword ISO (the International Organization for Standardization) and IEC (theInternational Electrotechnical Commission) form the specialized system for worldwide standardiz
12、ation. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutu
13、al interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. Draft International Standards adopted by the jo
14、int technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. International Standard ISO/IEC 11587 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technolog
15、y, Subcommittee SC 21, Open systems interconnection, data management and open distributed processing, in collaboration with ITU-T. The identical text is published as ITU-T Rec. X.702. Annexes A and B of this International Standard are for information only.iv blankBS ISO/IEC 11587:1996 BSI 11-1998 1
16、1 Scope The application context, defined in this Recommendation|International Standard, is available for an association in the systems management environment. The application context provides a basic Systems Management context with TP and may be part of a family of contexts as additional requirement
17、s are defined for systems management. The application context, defined in this Recommendation|International Standard, satisfies the following requirements: support for grouping CMIS requests so that consistency constraints can be satisfied by coordinated changes that, if done individually, would not
18、 satisfy the constraints, without requiring provisions for rollback or recovery; and support for atomic synchronization of a set of CMIS requests with provisions for commitment, rollback, and recovery so that either all the CMIS requests are satisfactorily performed or none are performed. 2 Normativ
19、e references The following Recommendations and International Standards contain provisions which, through reference in this text, constitute provisions of this Recommendation|International Standard. At the time of publication, the editions indicated were valid. All Recommendations and Standards are s
20、ubject to revision, and parties to agreements based on this Recommendation|International Standard are encouraged to investigate the possibility of applying the most recent edition of the Recommendations and Standards listed below. Members of IEC and ISO maintain registers of currently valid Internat
21、ional Standards. The Telecommunication Standardization Bureau of the ITU maintains a list of currently valid ITU-T Recommendations. 2.1 Identical Recommendations|International Standards ITU-T Recommendation X.207 (1993)| ISO/IEC9545:1994, Information technology Open Systems Interconnection Applicati
22、on Layer structure. CCITT Recommendation X.701 (1992)| ISO/IEC10040:1992, Information technology Open Systems Interconnection Systems management overview. NOTEThe Systems management overview defines a systems management application context which is adequate when only SMASE and CMISE facilities are n
23、eeded. ITU-T Recommendation X.851 (1993)| ISO/IEC9804:1994, Information technology Open Systems Interconnection Service definition for the commitment, concurrency and recovery service element. ITU-T Recommendation X.852 (1993)| ISO/IEC9805-1:1994, Information technology Open Systems Interconnection
24、Protocol for the commitment, concurrency and recovery service element: protocol specification. 2.2 Paired Recommendations|International Standards equivalent in technical content CCITT Recommendation X.208 (1988), Specification of Abstract Syntax Notation One (ASN.1). ISO/IEC 8824:1990, Information t
25、echnology Open Systems Interconnection Specification of Abstract Syntax Notation One (ASN.1). CCITT Recommendation X.209 (1988), Specification of basic encoding rules for Abstract Syntax Notation One (ASN.1). ISO/IEC 8825:1990, Information technology Open Systems Interconnection Specification of Bas
26、ic Encoding Rules for Abstract Syntax Notation One (ASN.1). CCITT Recommendation X.217 (1992), Service definition for the Association Control Service Element. ISO 8649:1988, Information processing systems Open Systems Interconnection Service Definition for the Association Control Service Element. CC
27、ITT Recommendation X.219 (1988), Remote Operations: Model, notation and service definition. ISO/IEC 9072-1:1989, Information processing systems Text communication Remote Operations Part 1: Model, notation and service definition. CCITT Recommendation X.227 (1992), Association Control Protocol Specifi
28、cation for Open Systems Interconnection for CCITT Applications. ISO 8650:1988, Information processing systems Open Systems Interconnection Protocol specification for the Association Control Service Element. CCITT Recommendation X.229 (1988), Remote operations: Protocol specification. ISO/IEC 9072-2:
29、1989, Information processing systems Text communication Remote Operations Part 2: Protocol specification.BS ISO/IEC 11587:1996 2 BSI 11-1998 CCITT Recommendation X.710 (1991), Common management information service definition for CCITT applications. ISO/IEC 9595:1991, Information technology Open Syst
30、ems Interconnection Common management information service definition. CCITT Recommendation X.711 (1991), Common management information protocol specification for CCITT applications. ISO/IEC 9596-1:1991, Information technology Open Systems Interconnection Common management information protocol Part1:
31、Specification. CCITT Recommendation X.860 (1992), Open Systems Interconnection Distributed Transaction Processing: Model. ISO/IEC 10026-1:1992, Information technology Open Systems Interconnection Distributed Transaction Processing Part 1: OSI TP Model. CCITT Recommendation X.861 (1992), Open Systems
32、 Interconnection Distributed Transaction Processing: Service definition. ISO/IEC 10026-2:1992, Information technology Open Systems Interconnection Distributed Transaction Processing Part 2: OSI TP Service. ITU-T Recommendation X.862 (1993), Open Systems Interconnection Distributed Transaction Proces
33、sing: Protocol specification. ISO/IEC 10026-3:1992, Information technology Open Systems Interconnection Distributed Transaction Processing Part 3: Protocol specification. 2.3 Additional references ISO/IEC 10026-5:. 1) , Information technology Open Systems Interconnection Distributed Transaction Proc
34、essing Part 5: Application context proforma and guidelines when using OSITP. 3 Abbreviations For the purposes of this Recommendation|International Standard, the following abbreviations apply: 1) To be published. ACSE Association Control Service Element (see CCITT Rec. X.217|ISO 8649 and CCITT Rec. X
35、.227|ISO 8650) AEI Application Entity Invocation APDU Application Protocol Data Unit ASE Application Service Element ASN.1 Abstract Syntax Notation One (seeCCITT Rec. X.208| ISO/IEC 8824) ASO Application Service Object BER Basic Encoding Rules (see CCITT Rec. X.209| ISO/IEC 8825) CCR Commitment Conc
36、urrency and Recovery (see ISO/IEC 9804-1 and9805-1) CMIP Common Management Information Protocol (see CCITT Rec. X.711| ISO/IEC 9596-1) CMIS Common Management Information Service (see CCITT Rec. X.710| ISO/IEC 9595) CMISE Common Management Information Service Element (see CCITT Rec. X.710|ISO/IEC 959
37、5 and CCITT Rec. X.711|ISO/IEC 9596-1) ISP International Standard Profile MACF Multiple Association Control Function MIS Management Information Service OSI Open Systems Interconnection RO Remote Operations (see CCITT Rec. X.219|ISO/IEC 9072-1 and CCITT Rec. X.229|ISO/IEC 9072-2) ROSE Remote Operatio
38、ns Service Element (see CCITT Rec. X.219| ISO/IEC 9072-1 and CCITT Rec. X.229|ISO/IEC 9072-2) SACF Single Association Control Function SMAE Systems Management Application Entity SMASE Systems Management Application Service Element SMFU Systems Management Functional Unit SMO Systems Management Overvi
39、ew (seeCCITT Rec. X.701| ISO/IEC 10040) TP Transaction Processing (see CCITT and ITU-T Recs. X.860/861/862| ISO/IEC 10026) TPASE Transaction Processing Application Service Element TPSU Transaction Processing Service User TPSUI Transaction Processing Service User InvocationBS ISO/IEC 11587:1996 BSI 1
40、1-1998 3 4 Application context name The Application Context Name of the application context, defined in this Recommendation|International Standard, shall have the following object identifier value: joint-iso-ccitt(2) ms(9) applicationContext(4) systems-management-with-tp(3) version1(0) and an object
41、 descriptor of: “Systems management application context with TP Version 1” 5 Component ASEs and ASOs The application context, defined in this Recommendation|International Standard, consists of the following ASEs: 5.1 ACSE 5.2 ROSE 5.3 CMISE 5.4 SMASE 5.5 TPASE 5.6 CCR 6 Persistent application contex
42、t rules Rules that concern information that has a lifetime that is greater than the lifetime of an association apply to the application context, defined in this Recommendation|International Standard, and are specified in ITU-T Rec. X.862|ISO/IEC 10026-3. 7 Control function (SACF/MACF) rules Besides
43、the rules already specified in the standards for the component ASEs, the rules of this clause apply to the application context, defined in this Recommendation|International Standard. This includes the rules for the determination of the common set of SMFUs as specified in CCITT Rec. X.701|ISO/IEC 100
44、40. TPSP Transaction Processing Service Provider Reference CCITT Rec. X.217|ISO 8649 and CCITT Rec. X.227|ISO 8650 Version number 1 Brief Description Association Control Service Element Reference CCITT Rec. X.219|ISO/IEC 9072-1 and CCITT Rec. X.229| ISO/IEC 9072-2 Version number 1 Brief Description
45、Remote Operations Service Element NOTEROSE versions are specified indirectly as part of CMISE. Reference CCITT Rec. X.710|ISO/IEC 9595 and CCITT Rec. X.711| ISO/IEC 9596-1 Version number 2 Brief Description Common Management Information Service Element Reference CCITT Rec. X.701|ISO/IEC 10040 (SMO)
46、Version number 1 (of SMASE UserData) Brief Description Systems Management Application Service Element Reference CCITT and ITU-T Recs. X.860/861/862|ISO/IEC 10026 Version number 1 Brief Description Transaction Processing Application Service Element Reference ISO/IEC 9804-1 and 9805-1 Version number 2
47、 Brief Description Commitment Concurrency and Recovery NOTECCR is used only when required by the functional units of TP selected on a dialogue.BS ISO/IEC 11587:1996 4 BSI 11-1998 7.1 Objectives/summary SMASE provides service to the user of the Systems Management Application Entity (SMAE); that user
48、is also both an MIS user and a Transaction Processing Service User (TPSU). SMASE uses CMISE which, in turn, uses ROSE. The SMAE includes the MACF that supports TP. The SACF provides the management association services to the SMAE and uses ACSE. SMASE, CMISE, and ROSE share a single abstract syntax t
49、hat is defined in CMIP. Presentation services that cannot be shared (such as Resynchronize) are used only by TPASE, CCR, and ACSE. CCR services are used only through TP services. ROSE services are used only through CMIS. The TP Dialogue functional unit and the CMIS kernel functional unit are always available. NOTEThe services actually used within the CMIS kernel depend on the needs of the CMIS user and may be a subset of the CMIS kernel services. In
