1、BSI Standards PublicationBS ISO/IEC/IEEE 8802-1AR:2014Information technology Telecommunicationsand information exchangebetween systems Local andmetropolitan area networksPart 1AR: Secure device identityBS ISO/IEC/IEEE 8802-1AR:2014 BRITISH STANDARDNational forewordThis British Standard is the UK imp
2、lementation of ISO/IEC/IEEE 8802-1AR:2014.The UK participation in its preparation was entrusted to Technical Committee IST/6, Data communications.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the nec
3、essary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014ISBN 978 0 580 86408 7 ICS 35.110 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard
4、was published under the authority of the Standards Policy and Strategy Committee on 30 April 2014.Amendments issued since publicationDate T e x t a f f e c t e dReference numberISO/IEC/IEEE 8802-1AR:2014(E)IEEE 2009INTERNATIONAL STANDARD ISO/IEC/IEEE8802-1ARFirst edition2014-02-15Information technol
5、ogy Telecommunications and information exchange between systems Local and metropolitan area networks Part 1AR: Secure device identity Technologies de linformation Tlcommunications et change dinformation entre systmes Rseaux locaux et mtropolitains Partie 1AR IEEE 2009 All rights reserved. Unless oth
6、erwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without permission in writing from ISO, IEC or IEEE at the respective address below. ISO cop
7、yright office IEC Central Office Institute of Electrical and Electronics Engineers, Inc. Case postale 56 3, rue de Varemb 3 Park Avenue, New York CH-1211 Geneva 20 CH-1211 Geneva 20 NY 10016-5997, USA Tel. + 41 22 749 01 11 Switzerland E-mail stds.iprieee.org Fax + 41 22 749 09 47 E-mail inmailiec.c
8、h Web www.ieee.org E-mail copyrightiso.org Web www.iec.ch Web www.iso.org Published in Switzerland ii IEEE 2009 All rights reservedBS ISO/IEC/IEEE 8802-1AR:2014 ISO/IEC/IEEE 8802-1AR:2014(E) IEEE 2009 All rights reserved iiiForeword ISO (the International Organization for Standardization) and IEC (t
9、he International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with parti
10、cular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have estab
11、lished a joint technical committee, ISO/IEC JTC 1. IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a consensus development process, approved
12、 by the American National Standards Institute, which brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of the Institute and serve without compensation. While the IEEE administers the process and establishes ru
13、les to promote fairness in the consensus development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the information contained in its standards. The main task of ISO/IEC JTC 1 is to prepare International Standards. Draft International Standards adopted by th
14、e joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is called to the possibility that implementation of this standard may require the use of subject matt
15、er covered by patent rights. By publication of this standard, no position is taken with respect to the existence or validity of any patent rights in connection therewith. ISO/IEEE is not responsible for identifying essential patents or patent claims for which a license may be required, for conductin
16、g inquiries into the legal validity or scope of patents or patent claims or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance or a Patent Statement and Licensing Declaration Form, if any, or in any licensing agreements are reasonabl
17、e or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from ISO or the IEEE Standards Association. ISO/IEC/IE
18、EE 8802-1AR was prepared by the LAN/MAN Standards Committee of the IEEE Computer Society (as IEEE Std 802.1AR-2009). It was adopted by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 6, Telecommunications and information exchange between systems, in parallel with its
19、 approval by the ISO/IEC national bodies, under the “fast-track procedure” defined in the Partner Standards Development Organization cooperation agreement between ISO and IEEE. IEEE is responsible for the maintenance of this document with participation and input from ISO/IEC national bodies. ISO/IEC
20、/IEEE 8802 consists of the following parts, under the general title Information technology Telecommunications and information exchange between systems Local and metropolitan area networks: Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications Part 1X: Port-based n
21、etwork access control Part 1AB: Station and media access control connectivity discovery Part 1AE: Media access control (MAC) security Part 1AR: Secure device identity Part 1AS: Timing and synchronization for time-sensitive applications in bridged local area networks BS ISO/IEC/IEEE 8802-1AR:2014 ISO
22、/IEC/IEEE 8802-1AR:2014(E)iv IEEE 2009 All rights reserved Part 15-4: Wireless medium access control (MAC) and physical layer (PHY) specifications for low-rate wireless personal area networks (WPANs) BS ISO/IEC/IEEE 8802-1AR:2014 ISO/IEC/IEEE 8802-1AR:2014(E)BS ISO/IEC/IEEE 8802-1AR:2014g44g40g40g40
23、;#23#23#23g54g87g71;#23#23#23;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23;#23#23#23#23#2
24、3#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23g36g53g140;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23;#23#23#23#23#2
25、3#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23;#23#23#23g44g40g40g40;#23#23#23g54g87g68g81g71g68g85g71;#23#23#23g73g82g85;#23#23#23 g47g82g70g68g79;#23#23#23g68g81g71;#23#23#23g80g72g87g85g82g83g82g79g76g87g68g81;#23#23#23g68g85g72g68;#23#23#23g81g72g87g90g82g85g78g86g179;#23
26、#23#23g54g72g70g88g85g72;#23#23#23g39g72g89g76g70g72;#23#23#23g44g71g72g81g87g76g87g92g44g40g40g40;#23#23#23g38g82g80g83g88g87g72g85;#23#23#23g54g82g70g76g72g87g92g54g83g82g81g86g82g85g72g71;#23#23#23g69g92;#23#23#23g87g75g72g47g36g49;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23g48g36g49;#
27、23#23#23g54g87g68g81g71g68g85g71g86;#23#23#23g38g82g80g80g76g87g87g72g72g44g40g40g40;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23;#23#23#23g51g68g85g78;#23#23#23g36g89g72g81g88g72;#23#23#23g49g72g90;#23#23#23g60g82g85g78;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23;#23#23#23g4
28、9g60;#23#23#23;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#2
29、3#23#23#23#23#23#23#23#23#23;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#
30、23#23#23#23#23#23#23;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23;#23#23#23g56g54g36;#23#23#23;#23#23#23;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23
31、#23#23#23#23;#23#23#23g39g72g70g72g80g69g72g85;#23#23#23;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23
32、#23#23#23#23#23#23#23;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23;#23#23#23#23#23#23#23#
33、23#23#23#23#23#23#23#23#23#23#23#23#23g36g53g55g48;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23;#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23#23BS ISO/IEC/IEEE 8802-1AR:2014 ISO/IEC/IEEE 8802-1AR:2014(E)BS ISO/IEC/IEEE 8802-1AR:2014The Institute of Elect
34、rical and Electronics Engineers, Inc.3 Park Avenue, New York, NY 10016-5997, USACopyright 2009 by the Institute of Electrical and Electronics Engineers, Inc.All rights reserved. Published 22 December 2009. Printed in the United States of America.IEEE and 802 are registered trademarks in the U.S. Pat
35、ent +1 978 750 8400. Permission to photocopy portions of any individual standard for educationalclassroom use can also be obtained through the Copyright Clearance Center.Copyright 2009 IEEE. All rights reserved. iiiBS ISO/IEC/IEEE 8802-1AR:2014 ISO/IEC/IEEE 8802-1AR:2014(E)BS ISO/IEC/IEEE 8802-1AR:2
36、014iv Copyright 2009 IEEE. All rights reserved.IntroductionA secure device identifier (DevID) is a cryptographic identity bound to a device used for assertion of thedevices identity. IEEE Std 802.1AR specifies globally unique per-device identifiers and the management and cryptographic binding of a d
37、evice toits identifiers, the relationship between an initially installed identity and subsequent locally significant identities,and interfaces and methods for use of DevIDs with existing and new provisioning and authenticationprotocols.IEEE Std 802.1AR can be used in conjunction with IEEE Std 802.1X
38、TMB2 and other IEEE and industrystandards that require a secure identifier or credential as part of authentication and provisioning processesthat establish trust in a device.1This is the first edition of IEEE Std 802.1AR.Notice to usersLaws and regulationsUsers of these documents should consult all
39、applicable laws and regulations. Compliance with theprovisions of this standard does not imply compliance to any applicable regulatory requirements.Implementers of the standard are responsible for observing or referring to the applicable regulatoryrequirements. IEEE does not, by the publication of i
40、ts standards, intend to urge action that is not incompliance with applicable laws, and these documents may not be construed as doing so. CopyrightsThis document is copyrighted by the IEEE. It is made available for a wide variety of both public and privateuses. These include both use, by reference, i
41、n laws and regulations, and use in private self-regulation,standardization, and the promotion of engineering practices and methods. By making this documentavailable for use and adoption by public authorities and private users, the IEEE does not waive any rights incopyright to this document.Updating
42、of IEEE documentsUsers of IEEE standards should be aware that these documents may be superseded at any time by theissuance of new editions or may be amended from time to time through the issuance of amendments,corrigenda, or errata. An official IEEE document at any point in time consists of the curr
43、ent edition of thedocument together with any amendments, corrigenda, or errata then in effect. In order to determine whethera given document is the current edition and whether it has been amended through the issuanceof amendments, corrigenda, or errata, visit the IEEE Standards Association website a
44、t http:/ieeexplore.ieee.org/xpl/standards.jsp, or contact the IEEE at the address listed previously.1The numbers in brackets correspond to those of the bibliography in Annex D.This introduction is not part of IEEE Std 802.1AR-2009, IEEE Standard for Local and metropolitan area networksSecure Device
45、Identity.BS ISO/IEC/IEEE 8802-1AR:2014 ISO/IEC/IEEE 8802-1AR:2014(E)BS ISO/IEC/IEEE 8802-1AR:2014Copyright 2009 IEEE. All rights reserved. vFor more information about the IEEE Standards Association or the IEEE standards development process,visit the IEEE-SA website at http:/standards.ieee.org.Errata
46、Errata, if any, for this and all other standards can be accessed at the following URL: http:/standards.ieee.org/reading/ieee/updates/errata/index.html. Users are encouraged to check this URL forerrata periodically.InterpretationsCurrent interpretations can be accessed at the following URL: http:/sta
47、ndards.ieee.org/reading/ieee/interp/index.html.PatentsAttention is called to the possibility that implementation of this standard may require use of subject mattercovered by patent rights. By publication of this standard, no position is taken with respect to the existence orvalidity of any patent ri
48、ghts in connection therewith. A patent holder or patent applicant has filed a statementof assurance that it will grant licenses under these rights without compensation or under reasonable rates,with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants
49、desiring to obtain such licenses. Other Essential Patent Claims may exist for which a statement of assurancehas not been received. The IEEE is not responsible for identifying Essential Patent Claims for which alicense may be required, for conducting inquiries into the legal validity or scope of Patents Claims, ordetermining whether any licensing terms or conditions provided in connection with submission of a Letter ofAssurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of
