BS PD CEN TR 15316-6-6-2017 Energy performance of buildings Method for calculation of system energy performance and system efficiencies Explanation and justification of EN 15316-4-.pdf

上传人:terrorscript155 文档编号:588710 上传时间:2018-12-15 格式:PDF 页数:48 大小:2.36MB
下载 相关 举报
BS PD CEN TR 15316-6-6-2017 Energy performance of buildings Method for calculation of system energy performance and system efficiencies Explanation and justification of EN 15316-4-.pdf_第1页
第1页 / 共48页
BS PD CEN TR 15316-6-6-2017 Energy performance of buildings Method for calculation of system energy performance and system efficiencies Explanation and justification of EN 15316-4-.pdf_第2页
第2页 / 共48页
BS PD CEN TR 15316-6-6-2017 Energy performance of buildings Method for calculation of system energy performance and system efficiencies Explanation and justification of EN 15316-4-.pdf_第3页
第3页 / 共48页
BS PD CEN TR 15316-6-6-2017 Energy performance of buildings Method for calculation of system energy performance and system efficiencies Explanation and justification of EN 15316-4-.pdf_第4页
第4页 / 共48页
BS PD CEN TR 15316-6-6-2017 Energy performance of buildings Method for calculation of system energy performance and system efficiencies Explanation and justification of EN 15316-4-.pdf_第5页
第5页 / 共48页
亲,该文档总共48页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、Energy performance of buildings - Method for calculation of system energy performance and system efficienciesPart 6-6: Explanation and justification of EN 15316-4-3, Module M3-8-3, M8-8-3PD CEN/TR 15316-6-6:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06TECHNICA

2、L REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15316-6-6 April 2017 ICS 27.160; 91.120.10; 91.140.10 English Version Energy performance of buildings - Method for calculation of system energy performance and system efficiencies - Part 6-6: Explanation and justification of EN 15316-4-3, Module

3、M3-8-3, M8-8-3 Heizungsanlagen und Wasserbasierte Khlanlagen in Gebuden - Verfahren zur Berechnung der Energieanforderungen und Nutzungsgrade der Anlagen - Teil 6-6: Begleitende TR zur EN 15316-4-3 (Wrmeerzeugungssysteme, thermische Solar- und Photovoltaikanlagen) This Technical Report was approved

4、by CEN on 27 February 2017. It has been drawn up by the Technical Committee CEN/TC 228. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Ic

5、eland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CEN

6、ELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN/TR 15316-6-6:2017 ENational forewordThis Published Document is the UK implementation of CEN/TR 15316-6-6:2017.The UK pa

7、rticipation in its preparation was entrusted to Technical Committee RHE/24, Heating systems and water based cooling systems in buildings.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary pr

8、ovisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 95252 4ICS 27.160; 91.140.10; 91.120.10Compliance with a British Standard cannot confer immunity from legal obligations.This British

9、 Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2017.Amendments/corrigenda issued since publicationDate Text affectedPUBLISHED DOCUMENTPD CEN/TR 15316-6-6:2017TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15316-6-6 April 2017 ICS

10、27.160; 91.120.10; 91.140.10 English Version Energy performance of buildings - Method for calculation of system energy performance and system efficiencies - Part 6-6: Explanation and justification of EN 15316-4-3, Module M3-8-3, M8-8-3 Heizungsanlagen und Wasserbasierte Khlanlagen in Gebuden - Verfa

11、hren zur Berechnung der Energieanforderungen und Nutzungsgrade der Anlagen - Teil 6-6: Begleitende TR zur EN 15316-4-3 (Wrmeerzeugungssysteme, thermische Solar- und Photovoltaikanlagen) This Technical Report was approved by CEN on 27 February 2017. It has been drawn up by the Technical Committee CEN

12、/TC 228. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norwa

13、y, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights o

14、f exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN/TR 15316-6-6:2017 EPD CEN/TR 15316-6-6:2017CEN/TR 15316-6-6:2017 (E) 2 Contents Page European foreword . 4 Introduction 5 1 Scope 7 2 Normative references 7 3 Terms and definitions . 7 4 Symbols and

15、 subscripts 7 5 Information on the methods . 7 5.1 General 7 5.2 Solar thermal methods 7 5.3 Photovoltaic applications . 8 6 Method description 8 6.1 Solar thermal applications 8 6.1.1 Method 1 monthly, using system test data 8 6.1.2 Method 2 monthly, using component specifications 11 6.1.3 Method 3

16、 hourly, using component data 19 6.2 Solar photovoltaic applications 22 7 Method selection 22 8 Worked out examples . 22 8.1 Solar thermal applications . 22 8.1.1 Method 1 using system test data . 23 8.1.2 Method 2 monthly, using component specifications 25 8.1.3 Method 3 hourly, using component spe

17、cifications . 28 9 Application range . 30 9.1 Energy performance 30 9.1.1 Solar thermal applications . 30 9.1.2 Solar photovoltaic applications 30 9.2 Energy certificate . 30 9.2.1 Solar thermal applications . 30 9.2.2 Solar photovoltaic applications 31 9.3 Inspection . 31 9.3.1 Solar thermal applic

18、ations . 31 9.3.2 Solar photovoltaic applications 32 9.4 Recommendations (tailored rating) . 32 9.4.1 Solar thermal applications . 32 9.4.2 Solar photovoltaic applications 32 9.5 Building or system complexity 32 9.5.1 Solar thermal applications . 32 9.5.2 Solar photovoltaic applications 32 10 Regula

19、tion use . 32 11 Information on the accompanying spreadsheet . 33 12 Results of the validation tests 33 PD CEN/TR 15316-6-6:2017CEN/TR 15316-6-6:2017 (E) 3 13 Quality issues . 33 A.1 Method 1 thermal solar, using system data . 34 A.2 Method 2 (monthly) . 36 A.3 Method 3 (hourly) 37 B.1 Example 1, me

20、thod 2 . 38 B.1.1 Input data and summary of results 38 B.1.2 Detailed results for the hot water service . 38 B.1.3 Detailed results for the space heating function . 39 Bibliography . 42 PD CEN/TR 15316-6-6:2017CEN/TR 15316-6-6:2017 (E) 4 European foreword This document (CEN/TR 15316-6-6:2017) has be

21、en prepared by Technical Committee CEN/TC 228 “Heating systems and water based cooling systems in buildings”, the secretariat of which is held by DIN. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be

22、 held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. PD CEN/TR 15316-6-6:2017CEN/TR 15316-6-6:2017 (E) 5 Introduction The set of EPB standards, technical repor

23、ts and supporting tools In order to facilitate the necessary overall consistency and coherence, in terminology, approach, input/output relations and formats, for the whole set of EPB-standards, the following documents and tools are available: a) a document with basic principles to be followed in dra

24、fting EPB-standards: CEN/TS 16628:2014, Energy Performance of Buildings - Basic Principles for the set of EPB standards 1; b) a document with detailed technical rules to be followed in drafting EPB-standards; CEN/TS 16629:2014, Energy Performance of Buildings - Detailed Technical Rules for the set o

25、f EPB-standards 2; c) the detailed technical rules are the basis for the following tools: 1) a common template for each EPB-standard, including specific drafting instructions for the relevant clauses; 2) a common template for each technical report that accompanies an EPB standard or a cluster of EPB

26、 standards, including specific drafting instructions for the relevant clauses; 3) a common template for the spreadsheet that accompanies each EPB standard, to demonstrate the correctness of the EPB calculation procedures. Each EPB-standards follows the basic principles and the detailed technical rul

27、es and relates to the overarching EPB-standard, EN ISO 52000-1 17. One of the main purposes of the revision of the EPB-standards is to enable that laws and regulations directly refer to the EPB-standards and make compliance with them compulsory. This requires that the set of EPB-standards consists o

28、f a systematic, clear, comprehensive and unambiguous set of energy performance procedures. The number of options provided is kept as low as possible, taking into account national and regional differences in climate, culture and building tradition, policy and legal frameworks (subsidiarity principle)

29、. For each option, an informative default option is provided (Annex B). Rationale behind the EPB technical reports There is a risk that the purpose and limitations of the EPB standards will be misunderstood, unless the background and context to their contents and the thinking behind them is explaine

30、d in some detail to readers of the standards. Consequently, various types of informative contents are recorded and made available for users to properly understand, apply and nationally or regionally implement the EPB standards. If this explanation would have been attempted in the standards themselve

31、s, the result is likely to be confusing and cumbersome, especially if the standards are implemented or referenced in national or regional building codes. Therefore each EPB standard is accompanied by an informative technical report, like this one, where all informative content is collected, to ensur

32、e a clear separation between normative and informative contents (see CEN/TS 16629 2): to avoid flooding and confusing the actual normative part with informative content, to reduce the page count of the actual standard, and PD CEN/TR 15316-6-6:2017CEN/TR 15316-6-6:2017 (E) 6 to facilitate understandi

33、ng of the set of EPB standards. This was also one of the main recommendations from the European CENSE project 19 that laid the foundation for the preparation of the set of EPB standards. PD CEN/TR 15316-6-6:2017CEN/TR 15316-6-6:2017 (E) 7 1 Scope This Technical Report refers to EN 15316-4-3, Modules

34、 3-8 and 8-8. It contains information to support the correct understanding, use and national adaptation of EN 15316-4-3. This Technical Report does not contain any normative provision. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document an

35、d are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 15316-4-3:2017, Energy performance of buildings Method for calculation of system energy requirem

36、ents and system efficiencies Part 4-3: Heat generation systems, thermal solar and photovoltaic systems, Module M3-8-3, M8-8-3, M11-8-3 EN ISO 7345:1995, Thermal insulation Physical quantities and definitions (ISO 7345:1987) EN ISO 52000-1:2017, Energy performance of buildings Overarching EPB assessm

37、ent Part 1: General framework and procedures (ISO 52000-1:2017) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 7345:1995, EN ISO 52000-1:2017, EN 15316-4-3:2017 (the accompanied EPB standard) apply. 4 Symbols and subscripts For the purposes of th

38、is document, the symbols and subscripts given in EN ISO 52000-1:2017 and in EN 15316-4-3:2017 apply. 5 Information on the methods 5.1 General The standard describes six methods for solar applications for intended use in buildings. The methods one to three refer to solar thermal applications and the

39、methods four to six refer to photovoltaic applications. 5.2 Solar thermal methods Method 1 is used for solar thermal applications if (only) system test data according to EN 12976-2 is available. This is commonly the case for solar system types for which the component specifications cannot be determi

40、ned separately. An example of this is a so called Integrated Collector Storage system (= ICS). The system test result, the annual performance of the system, for the actual climate conditions is interpolated to the actual heat demand. Optionally the annual performance is distributed over the month, u

41、sing the distribution of the solar irradiance on the collector plane as the key. The method 1 is limited to the generation of heat for the service domestic hot water production. PD CEN/TR 15316-6-6:2017CEN/TR 15316-6-6:2017 (E) 8 Method 2 is used for solar thermal applications if component specifica

42、tions for the collector and heat storage are available. This is commonly the case for solar thermal for intended use in buildings. Examples of this are solar domestic hot water systems and combi-systems. The method 2 applies the so called Fchart method 3 to calculate the monthly performance using th

43、e component specifications and system design parameters as input. The method 2 is applicable for the services water heating and space heating. The method 2 is intended for use with a monthly time step. Method 3 is used for solar thermal applications if component specifications for the collector and

44、heat storage are available. Method 3 applies an hourly numerical calculation method to determine the solar loop output to the storage tank. The method 3 is intended to be used in combination with EN 15316-5. The combination of the two methods is applicable for the services water heating and space he

45、ating. 5.3 Photovoltaic applications 6 Method description 6.1 Solar thermal applications 6.1.1 Method 1 monthly, using system test data 6.1.1.1 General The effect of a thermal solar system on the energy performance of a building comprises of: heat output to the distribution systems for domestic hot

46、water, thus reducing the buildings consumption of other (e.g. conventionally generated) heat; recovered losses used for space heating, thus reducing the buildings consumption of heat for space heating; electricity to be supplied, thus increasing the buildings consumption of electricity; reduction of

47、 operation time of the conventional heating generator. In some cases, the conventional back-up heater can be turned off during summer, thus reducing stand-by thermal losses and auxiliary electricity consumption. 6.1.1.2 Rationale Method 1 uses system test data for the product technical input data. T

48、he system test data are derived from a test result according to EN 12976-2 or according to EN 12977-2. The test method following EN 12976-2 consists of two steps: 1. system test; The goal of the system test is to determine the whole system performance parameters determined from dynamic operating con

49、ditions. 2. annual performance calculation. The performance parameters are combined with a simplified, standardized, calculation model to calculate the performance for (e.g.) one year for specific reference climate and heat use conditions. Method 1 requires two sets of the annual performance for the climate conditions applicable. One for a lower or equal and one with a higher heat use than applicable. By means of linear interpolation the annual performance for the applicable heat use is derived from these results. P

展开阅读全文
相关资源
  • BS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdfBS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdf
  • BS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdfBS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdf
  • BS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdfBS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdf
  • BS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdfBS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdf
  • BS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdfBS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdf
  • BS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdfBS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdf
  • BS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdfBS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdf
  • BS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdfBS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdf
  • BS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdfBS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdf
  • BS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdfBS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > BS

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1