BS PD CEN TR 16749-2014 Aluminium and aluminium alloys Classification of Defects and Imperfections in High Pressure Low Pressure and Gravity Die Cast Products《铝和铝合金 高压 低压以及重力压铸产品的缺.pdf

上传人:eastlab115 文档编号:588761 上传时间:2018-12-15 格式:PDF 页数:44 大小:3.92MB
下载 相关 举报
BS PD CEN TR 16749-2014 Aluminium and aluminium alloys Classification of Defects and Imperfections in High Pressure Low Pressure and Gravity Die Cast Products《铝和铝合金 高压 低压以及重力压铸产品的缺.pdf_第1页
第1页 / 共44页
BS PD CEN TR 16749-2014 Aluminium and aluminium alloys Classification of Defects and Imperfections in High Pressure Low Pressure and Gravity Die Cast Products《铝和铝合金 高压 低压以及重力压铸产品的缺.pdf_第2页
第2页 / 共44页
BS PD CEN TR 16749-2014 Aluminium and aluminium alloys Classification of Defects and Imperfections in High Pressure Low Pressure and Gravity Die Cast Products《铝和铝合金 高压 低压以及重力压铸产品的缺.pdf_第3页
第3页 / 共44页
BS PD CEN TR 16749-2014 Aluminium and aluminium alloys Classification of Defects and Imperfections in High Pressure Low Pressure and Gravity Die Cast Products《铝和铝合金 高压 低压以及重力压铸产品的缺.pdf_第4页
第4页 / 共44页
BS PD CEN TR 16749-2014 Aluminium and aluminium alloys Classification of Defects and Imperfections in High Pressure Low Pressure and Gravity Die Cast Products《铝和铝合金 高压 低压以及重力压铸产品的缺.pdf_第5页
第5页 / 共44页
亲,该文档总共44页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、BSI Standards PublicationPD CEN/TR 16749:2014Aluminium and aluminiumalloys Classification ofDefects and Imperfections inHigh Pressure, Low Pressureand Gravity Die Cast ProductsPD CEN/TR 16749:2014 PUBLISHED DOCUMENTNational forewordThis Published Document is the UK implementation of CEN/TR 16749:201

2、4.The UK participation in its preparation was entrusted to Technical Committee NFE/35, Light metals and their alloys.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contra

3、ct. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 86320 2ICS 77.120.10Compliance with a British Standard cannot confer immunity from legal obligations.This Published Document was published under the aut

4、hority of the Standards Policy and Strategy Committee on 31 October 2014.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dPD CEN/TR 16749:2014TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16749 October 2014 ICS 77.120.10 English Version Aluminium and aluminiu

5、m alloys - Classification of Defects and Imperfections in High Pressure, Low Pressure and Gravity Die Cast Products Aluminium et alliages daluminium - Classification des dfauts et imperfections des produits mouls par coule haute pression, basse pression et gravit Aluminium und Aluminiumlegierungen -

6、 Klassifikation von Fehlern und Unvollkommenheiten fr Druckguss, Niederdruckguss und Schwerkraftkokillenguss This Technical Report was approved by CEN on 9 September 2014. It has been drawn up by the Technical Committee CEN/TC 132. CEN members are the national standards bodies of Austria, Belgium, B

7、ulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,

8、 Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membe

9、rs. Ref. No. CEN/TR 16749:2014 EPD CEN/TR 16749:2014CEN/TR 16749:2014 (E)2 Contents Page Foreword 5 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . . 6 4 Classification of defects and imperfections in high pressure, low pressure and gravity die cast products . . 8 4.1 General 8 4.2

10、Classification . . 9 5 Definition of defects and imperfections . 10 5.1 General 10 5.2 Shrinkage defects and imperfections . . 11 5.3 Gas-related defects and imperfections . . 11 5.4 Filling-related defects and imperfections . . 12 5.5 Undesired phases . 12 5.6 Thermal contraction defects and imperf

11、ections . 12 5.7 Metal-die interaction defects and imperfections . 13 5.8 Geometrical defects and imperfections . 13 Annex A (informative) Description of defects and imperfections in High Pressure, Low Pressure and Gravity Die Cast Products . . 14 A.1 Internal defects and imperfections . 14 A.1.1 Sh

12、rinkage defects and imperfections . . 14 A.1.1.1 Macro-shrinkage (Type A1.1) . . 14 A.1.1.2 Interdendritic shrinkage (Type A1.2) . . 14 A.1.1.3 Layer porosity (Type A1.3) . . 15 A.1.2 Gas-related defects and imperfections . . 16 A.1.2.1 Air entrapment porosity (Type A2.1) . . 16 A.1.2.2 Hydrogen por

13、osity (Type A2.2) . 17 A.1.2.3 Vapor entrapment porosity (Type A2.3) . 18 PD CEN/TR 16749:2014 CEN/TR 16749:2014 (E)3 A.1.2.4 Lubricant/release agent entrapment porosity (Type A2.4). 18 A.1.3 Filling-related defects and imperfections . . 19 A.1.3.1 Cold joint (Type A3.1). 19 A.1.3.2 Lamination (Type

14、 A3.2) . . 20 A.1.3.3 Cold shot (Type A3.3). 20 A.1.4 Undesired phases . 21 A.1.4.1 Inclusion (Type A4.1) . 21 A.1.4.2 Undesired structure (Type A4.2) . 21 A.1.5 Thermal contraction defects and imperfections . 22 A.1.5.1 Cold crack (Type A5.1) . 22 A.1.5.2 Hot tear, hot crack (Type A5.2) . 23 A.2 Su

15、rface defects and imperfections . 24 A.2.1 Shrinkage defects and imperfections . . 24 A.2.1.1 Sink (Type B1.1) 24 A.2.2 Gas-related defects and imperfections . . 25 A.2.2.1 Blister (Type B2.1) . . 25 A.2.2.2 Pinhole (Type B2.2) . . 25 A.2.3 Filling-related defects and imperfections . . 26 A.2.3.1 Co

16、ld joint and vortex (Type B3.1) . 26 A.2.3.2 Lamination (Type B3.2) . . 27 A.2.3.3 Cold shot (Type B3.3). 27 A.2.4 Undesired phases . 28 A.2.4.1 Surface deposit (Type B4.1) . . 28 A.2.4.2 Contaminant or inclusion (Type B4.2) . . 28 A.2.5 Thermal contraction defects and imperfections . 29 A.2.5.1 Col

17、d crack (Type B5.1) . 29 A.2.5.2 Hot tear, hot crack (Type B5.2) . 30 A.2.6 Metal/die interaction defects and imperfections . 30 A.2.6.1 Erosion (Type B6.1) . . 30 A.2.6.2 Soldering (Type B6.2). 31 PD CEN/TR 16749:2014CEN/TR 16749:2014 (E)4 A.2.6.3 Thermal fatigue marks (Type B6.3) . 31 A.2.6.4 Ejec

18、tion mark (Type B6.4) . 32 A.2.6.5 Corrosion of the die (Type B6.5) . 32 A.3 Geometry defects and imperfections . 33 A.3.1 Lack of material - Incompleteness (Type C1.1) . 33 A.3.2 Excess of material - Flash (Type C2.1) . 33 A.3.3 Out of tolerance - Deformation (Type C3.1) . 34 Annex B (informative)

19、Translations of defects and imperfections terminology . . 35 Annex C (informative) Examples of detection techniques and size of defects and imperfections . 37 Bibliography . 39 PD CEN/TR 16749:2014Foreword This document (CEN/TR 16749:2014) has been prepared by Technical Committee CEN/TC 132 “Alumini

20、um and aluminium alloys”, the secretariat of which is held by AFNOR. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. CEN/TR 16749:2014

21、 (E)PD CEN/TR 16749:20141 Scope This Technical Report specifies the classification of the defects and imperfections may be present in cast products manufactured by high pressure, low pressure and gravity die casting of aluminium alloys. 2 Normative references The following documents, in whole or in

22、part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12258-1:2012, Aluminium and aluminium alloys

23、 - Terms and definitions - Part 1: General terms 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 12258-1:2012 and the following apply. 3.1 casting process process in which molten metal is introduced into a mould where it solidifies SOURCE: EN 12258-1:

24、2012, 3.1.1 3.2 die casting process casting process in which molten metal is injected under substantial pressure, typically above 70 bars, into a metal die and solidifies under this pressure Note 1 to entry: Die casting process is also referred to as “pressure die casting (process)” or “high pressur

25、e die casting (process)”. SOURCE: EN 12258-1:2012, 3.1.10 3.3 permanent mould casting process casting process in which molten metal is introduced by gravity or low pressure into a mould constructed of durable material, typically iron or steel Note 1 to entry: A permanent mould casting process where

26、the metal solidifies in a metal mould under low pressure (typically less than 1 bar above atmospheric pressure) is also referred to as a “low pressure die casting process”. SOURCE: EN 12258-1:2012, 3.1.9 3.4 casting product at or near finished shape, formed by solidification of the metal in a mould

27、or a die SOURCE: EN 12258-1:2012, 2.5.1 3.5 dendrite crystal that has a tree-like, branching pattern, being most evident in cast metals slowly cooled through the solidification range SOURCE: EN 12258-1:2012, 4.5.17 CEN/TR 16749:2014 (E)PD CEN/TR 16749:20143.6 microstructure structure of a metal as r

28、evealed by microscopic examination of a surface, typically after mechanical and/or chemical preparation, e.g. polishing and micro-etching SOURCE: EN 12258-1:2012, 4.5.10 3.7 dendrite arm spacing mean distance of adjacent secondary arms of a dendrite SOURCE: EN 12258-1:2012, 4.5.18 3.8 defect quality

29、 characteristic which is lower with respect to the level or state foreseen (usually specified) and which does not allow the product to carry out a function requested SOURCE: EN 12258-1:2012, 7.1.2 3.9 imperfection quality characteristic which is for a some extent lower with respect to the level or s

30、tate foreseen or a deviation from a continuous appearance of the base material not yet evaluated against a threshold level (a technical OK / not OK evaluation is not allowed) Note 1 to entry: The term “inhomogeneity” can also be used. Note 2 to entry: This does not mean necessarily that the product

31、is not suitable for use. An imperfection needs to be evaluated by means of a proper scale, based on the related specifications, to decide if the product has a quality level making it suitable for the use. 3.10 shrinkage cavity void left in cast metals as a result of solidification shrinkage SOURCE:

32、EN 12258-1:2012, 5.2.10 3.11 gas porosity porosity caused by entrapped gas, evolution by evaporated organic release compounds, or by evolution of dissolved hydrogen during solidification 3.12 inclusion extraneous material accidentally entrapped into the liquid metal and whose possible root causes ar

33、e melt treatment procedures initiating oxidation, transported to the melt by contaminated ingot surfaces, transported into castings due to abrasion of process equipment, entrapped into the metal surface during hot or cold working 3.13 blister raised spot whose inside is hollow, that forms on the sur

34、face of products and is caused by the expansion of entrapped gas at the opening of the die or during conditions of elevated temperature in subsurface regions, typically during thermal treatment CEN/TR 16749:2014 (E)PD CEN/TR 16749:20143.14 hot crack crack formed in a cast metal or in a welding becau

35、se of internal stress developed upon cooling at the solidus temperature or slightly above SOURCE: EN 12258-1:2012, 5.2.8 3.15 cold crack crack in cast metal initiated by mechanical stresses at temperatures significantly below the solidus temperature SOURCE: EN 12258-1:2012, 5.2.9 3.16 corrosion dete

36、rioration of a metal by chemical or electrochemical reaction with its environment SOURCE: EN 12258-1:2012, 5.6.14 3.17 flash thin protrusion into the parting surface of a die which forms when metal, in excess of that required to fill the impressions, is forced between the die interfaces 4 Classifica

37、tion of defects and imperfections in high pressure, low pressure and gravity die cast products 4.1 General Defects and imperfections implemented in the present classification are metallurgy-related, i.e. directly bound to high pressure, low pressure and gravity die casting processes. The defects and

38、 imperfections are classified using a scheme based on three levels: a) The level I is based on morphology/location of defects and imperfections, with reference to the investigation techniques suitable for their detection (visual inspections and controls involving the bulk material): there are intern

39、al (Table 1) and external or surface (Table 2) defects and imperfections. Sub-surface defects and imperfections (i.e. so close to the surface that they can affect external aspect detectable by conventional surface investigation techniques) are considered surface defects and imperfections. Finally, t

40、he geometrical defects and imperfections (Table 3) refer to the casting shape in terms of dimensions and tolerances. b) The level II is mainly focused on the metallurgical, physical, chemical and process-based origin of defects and imperfections. They are grouped into several classes according to th

41、eir general metallurgical origin: 1) defects and imperfections related to the presence of gas (gas-related defects and imperfections); 2) defects and imperfections related to material volume contraction during metal solidification (shrinkage defects and imperfections); 3) defects and imperfections r

42、elated to thermal contraction prevented by previously solidified metal or by the die (thermal contraction defects and imperfections); 4) defects and imperfections related to incorrect filling of the die-cavity (filling defects and imperfections); CEN/TR 16749:2014 (E)PD CEN/TR 16749:20145) defects a

43、nd imperfections related to metal/die interaction; 6) defects and imperfections related to the presence of unsuitable phases (undesired phases), originating from the interaction of the metal with external environment during melting, pouring, casting, filling or extraction/ejection from the die. As p

44、reviously observed, the knowledge of metallurgical origin could supply starting points for corrective actions (e.g. on process parameters). c) The level III is used to identify the specific types of defects and imperfections. Usually, the term adopted to describe a particular type of defect and impe

45、rfection allows a better definition of its metallurgical origin, which was preliminarily identified in the previous level. NOTE Other defects and imperfections, related to subsequent operations (handling finishing, machining), have not been considered. 4.2 Classification Table 1 Classification of in

46、ternal defects and imperfections Level I Level II Level III A Internal defects and imperfections A1 Shrinkage defects and imperfections A1.1 Macro-shrinkage A1.2 Interdendritic shrinkage A1.3 Layer porosity A2 Gas-related defects and imperfections A2.1 Air entrapment porosity A2.2 Hydrogen porosity

47、A2.3 Vapour entrapment porosity A2.4 Lubricant and/or die release agent entrapment porosity A3 Filling-related defects and imperfections A3.1 Cold joint A3.2 Lamination A3.3 Cold shot A4 Undesired phases A4.1 Inclusion A4.2 Undesired structure A5 Thermal contraction defects and imperfections A5.1 Co

48、ld crack A5.2 Hot tear, hot crack CEN/TR 16749:2014 (E)PD CEN/TR 16749:2014Table 2 Classification of surface defects and imperfections Level I Level II Level III B Surface defects and imperfections B1 Shrinkage defects and imperfections B1.1 Sink B2 Gas-related defects and imperfections B2.1 Blister

49、 B2.2 Pinhole B3 Filling-related defects and imperfections B3.1 Cold joint, Vortex B3.2 Lamination B3.3 Cold shot B4 Undesired phases B4.1 Surface deposit B4.2 Contamination, inclusion B5 Thermal contraction defects and imperfections B5.1 Cold crack B5.2 Hot tear, hot crack B6 Metal-die interaction defects and imperfections B6.1 Erosion B6.2 Soldering B6.3 Thermal fatigue marks B6.4 Ejection mark B6.5 Corrosion of the die Table 3 Classification of geometrical defects and imperfections Level I Level II Level III C Geometrical defects and imperfec

展开阅读全文
相关资源
  • BS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdfBS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdf
  • BS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdfBS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdf
  • BS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdfBS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdf
  • BS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdfBS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdf
  • BS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdfBS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdf
  • BS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdfBS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdf
  • BS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdfBS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdf
  • BS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdfBS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdf
  • BS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdfBS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdf
  • BS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdfBS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > BS

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1