1、Sealants for non-structural use in joints in buildings andpedestrian walkways Guidance for CE marking and Declaration of Performance (DoP)PD CEN/TR 17068:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis Published Document is the UK implementa
2、tion of CEN/TR 17068:2017.The UK participation in its preparation was entrusted to TechnicalCommittee B/547, Sealants for building and construction.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the ne
3、cessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 95790 1ICS 91.100.50Compliance with a British Standard cannot confer immunity fromlegal obligations.This Published Document
4、 was published under the authority of theStandards Policy and Strategy Committee on 31 March 2017.Amendments/corrigenda issued since publicationDate Text affectedPUBLISHED DOCUMENTPD CEN/TR 17068:2017TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 17068 February 2017 ICS 91.100.50 Engl
5、ish Version Sealants for non-structural use in joints in buildings and pedestrian walkways - Guidance for CE marking and Declaration of Performance (DoP) Mastics pour joints pour des usages non structuraux dans les constructions immobilires et pour chemins pitonniers - Lignes directrices concernant
6、le marquage CE et la dclaration des performances (DoP)Fugendichtstoffe fr nicht tragende Anwendungen in Gebuden und Fugngerwegen - Anleitung fr die CE-Kennzeichnung und die Leistungserklrung This Technical Report was approved by CEN on 6 February 2017. It has been drawn up by the Technical Committee
7、 CEN/TC 349.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, No
8、rway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All right
9、s of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN/TR 17068:2017 EPD CEN/TR 17068:2017CEN/TR 17068:2017 (E) 2 Contents Page European foreword . 3 Introduction 4 1 Scope 5 2 Normative references 5 3 Example of DOP 5 4 Examples of CE marking . 7 4.
10、1 Background . 7 4.2 Example of CE marking . 7 4.3 Example of an additional customer information . 9 Bibliography . 10 PD CEN/TR 17068:2017CEN/TR 17068:2017 (E) 3 European foreword This document (CEN/TR 17068:2017) has been prepared by Technical Committee CEN/TC 349 “Sealants for joints in building
11、construction”, the secretariat of which is held by AFNOR. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. PD CEN/TR 17068:2017CEN/TR 17068:2017 (E) 4
12、 Introduction In 2015, as it was in line with the provisions in Subclause 11.4 of the CEN-CENELEC Internal Regulations, BT/TCMG on behalf of BT decides that Technical Committees preparing hENs in support of Regulation EU 305/211 (CPR - Construction Products Regulation) could develop Technical Report
13、s to include examples of CE marking and Declaration of Performance (DoP). These examples are especially useful for SMEs. This Technical Report does not supersede the provisions of the CPR. PD CEN/TR 17068:2017CEN/TR 17068:2017 (E) 5 1 Scope This Technical Report provides guidance for CE marking and
14、Declaration of Performance (DoP) for sealants for joints in building construction. 2 Normative references Not applicable. 3 Example of DOP This clause gives an example of a DoP that may be used for a sealant intended to be used in joints only on the internal side of facade elements: DECLARATION OF P
15、ERFORMANCE No. 00001 DOP - 2017/05/12 1. Unique identification code of the product-type: Easy seal 2. Intended use/es: Interior facade sealant (F INT) 3. Manufacturer: AnyCo SA, PO Box 21 B-1050 Brussels, Belgium Tel.:+32987654321 Fax: +32123456789 e-mail: anyco.saprovider.be 4. Authorized represent
16、ative: Not relevant 5. System/s of AVCP: System 4 for the type testing System 3 for the reaction to fire 6. Harmonized standard: EN 15651-1:2017 PD CEN/TR 17068:2017CEN/TR 17068:2017 (E) 6 Notified body/-ies: Notified testing laboratory No. 1234 performed the testing of the reaction to fire 7. Decla
17、red performance/s: Essential characteristics Performance System/s of assessment and verification of constancy of performance Harmonized technical specification Reaction to fire Class E System 3 EN 156511:2017 Release of chemicals dangerous to the environment and health NPD System 4 Water tightness a
18、nd air tightness, as: - resistance to flow 5 mm - loss of volume 45 % - tensile properties, i.e. elongation at break (23 C) (*) 25 % Durability - tensile properties, i.e. elongation at break (23 C) (*) 25 % (*) Conditioning method A Tested on mortar M1 substrate, no primer 8. Appropriate Technical D
19、ocumentation and /or Specific Technical Documentation: Not relevant The performance of the product identified above is in conformity with the set of declared performance/s. This declaration of performance is issued in accordance with Regulation (EU) No 305/2011, under the sole responsibility of the
20、manufacturer identified above. Signed for and on behalf of the manufacturer by: (name) At (place) on (date of issue) . (signature) . PD CEN/TR 17068:2017CEN/TR 17068:2017 (E) 7 4 Examples of CE marking 4.1 Background Article 9 of the CPR stipulates that CE marking shall be affixed to the constructio
21、n product or a label attached to the product (or accompanying documentation). The content and scope of CE marking is set out in Article 9(2). Some products however, are too small to affix the entire CE marking to the product packaging consistent with Article 9(2). In these cases, Article 9(1) of the
22、 CPR states that CE marking can be affixed to the accompanying documents instead. Nevertheless, the absence of any visible CE marking on the label of the product packaging will lead to considerable problems with its marketing and free movement in the European Economic Area (EEA). Consequently, only
23、in cases where it is not possible to affix the CE marking containing all information required by Article 9(2) of the CPR directly on the product itself or its packaging, an additional customer information (short summary of the CE marking), small enough to fit on a small label/product such as a joint
24、 sealant container can be affixed. This additional customer information represents additional voluntary information to the CE marking that is consistent with Article 9(2) and can be found in the accompanying documents. For tubular bags without labels and tubes, which are sometimes supplied in carton
25、s (external packaging) containing several bags/tubes, the entire CE marking should be affixed to the accompanying documents in accordance with the CPR, Article 9(1). To improve marketability or acceptance of the product on the market, the entire CE marking can be affixed additionally to the external
26、 packaging or, if applicable, on blister packaging. This clause gives an example of CE marking and the additional customer information. 4.2 Example of CE marking This subclause gives an example of CE marking of sealants in interior application under system 4 and of Euroclass E subject to fire regula
27、tions under system 3. PD CEN/TR 17068:2017CEN/TR 17068:2017 (E) 8 CE marking, consisting of the “CE”-symbol 0123 Identification number of the notified test laboratory AnyCo Ltd, PO Box 21, B-1050, Brussels, Belgium 16 No. 00001 DOP 2017/05/12 Name and the registered address of the manufacturer, or i
28、dentifying mark Last two digits of the year in which the marking was first affixed Reference number of the DOP EN 156511:2017 Easy seal Sealant for faade for interior application (FINT) Conditioning: Method A Substrate: Mortar M1, no primer No. of European standard applied Unique identification code
29、 of the product-type Intended use of the product as laid down in the European standard applied Reaction to fire Class E Level or class of the performance declared Release of chemicals dangerous to the environment and health NPD WATER TIGHTNESS and AIR TIGHTNESS - resistance to flow 5 mm - loss of vo
30、lume 45 % - tensile properties, i.e. elongation at break (23 C) 25 % Durability - tensile properties, i.e. elongation at break (23 C) 25 % www.anyco-ltd.eu/dop Website hosting the DoP Figure 1 Example CE marking of sealants for facades in interior application under system 4 and of Euroclass E subjec
31、t to fire regulations under system 3 PD CEN/TR 17068:2017CEN/TR 17068:2017 (E) 9 4.3 Example of an additional customer information An additional customer information could be drafted similar to the example below: www.anyco-ltd.eu/dop“CE”- symbol 16 AnyCo Ltd No. 00001 DOP 2017/05/12 Last two digits
32、of the year in which the marking was first affixed Name or identifying mark of the manufacturer NOTE Registered address of the manufacturer may also be added. Reference number of the DOP EN 156511 F INT No. of European standard applied Type of sealant Website hosting the DoP NOTE Website hosting the
33、 DoP (only mandatory when making a DoP available on a website acc. to Delegated Regulation (EU) No 157/2014) Figure 2 Example of an additional customer information of sealants for facades in interior application PD CEN/TR 17068:2017CEN/TR 17068:2017 (E) 10 Bibliography 1 EN 15651-1:2017, Sealants fo
34、r non-structural use in joints in buildings and pedestrian walkways Part 1: Sealants for facade elements 2 EN 15651 (all parts), Sealants for non-structural use in joints in buildings and pedestrian walkways 3 Commission Delegated Regulation (EU) No 157/2014 of 30 October 2013 on the conditions for
35、making a declaration of performance on construction products available on a website 4 Regulation (EU) N 305/2011 of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC, Annex III: Declaration of performance 5 Commission
36、 Delegated Regulation (EU) N 574/2014 of 21 February 2014 amending Annex III to Regulation (EU) No 305/2011 of the European Parliament and of the Council on the model to be used for drawing up a declaration of performance on construction products PD CEN/TR 17068:2017This page deliberately left blank
37、BSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI
38、)About usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consul
39、tation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting o
40、ur Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standard
41、s from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the content in BSI publications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the in
42、formation used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use.Save for the provisions below, you may not transfer, share or disseminate any portion of the standard to any other person. You may not adapt, distrib
43、ute, commercially exploit, or publicly display the standard or any portion thereof in any manner whatsoever without BSIs prior written consent.Storing and using standardsStandards purchased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for per
44、sonal or internal company use only. The standard may be stored on more than 1 device provided that it is accessible by the sole named user only and that only 1 copy is accessed at any one time. A single paper copy may be printed for personal or internal company use only.Standards purchased in hard c
45、opy format: A British Standard purchased in hard copy format is for personal or internal company use only. It may not be further reproduced in any format to create an additional copy. This includes scanning of the document.If you need more than 1 copy of the document, or if you wish to share the doc
46、ument on an internal network, you can save money by choosing a subscription product (see Subscriptions).Reproducing extractsFor permission to reproduce content from BSI publications contact the BSI Copyright & Licensing team.SubscriptionsOur range of subscription services are designed to make using
47、standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up t
48、o date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Li
