1、CANKGSB-138.1-96 Supersedes CANKGSB- 138.1 -M80 Canadian General St and a rd s Board Fabric for Chain Link Fence National Standard of Canada CGSB CANICGSB- L38-1-9b ft 1874b50 0028534 2T4 M The CANADIAN GENERAL STANDARDS BOARD (CGSB), under whose auspices this standard has been developed is a govern
2、ment agency within the Federal Department of Supply and Services. CGSB is engaged in the production of voluntary standards in a wide range of subject areas through the media of standards committees and the consensus process. The standards committees are composed of representatives of relevant intere
3、sts including producers, consumers and other users, retailers. governments, educational institutions, technical, professional and trade societies, and research and testing organizations. Any given standard is developed on the consensus of views expressed by such representatives. The Ministers Adviso
4、ry Council on CGSB reviews the results of the consensus proms. CGSB has been accredited by the Standards Council of Canada as a national standards-writing organization. The standards that it develops and offers as National Standards of Canada conform to the criteria and procedures established for th
5、is purpose by the Standards Council of Canada. in addition to standards it publishes as national standards. CGSB produces standards to meet particular needs. in response to requests from a variety of sources in both the public and private sectors. Both CGSB standards and national standards developed
6、 by CGSB are developed in conformance with the policies described in the Policy Manual for the Development and Maintenance of Standards by CGSB. CGSB standards are subject to review and revision at any time, so as to ensure that they keep abreast of technological progress. Suggestions for their impr
7、ovement, which are always welcome. should be brought to the notice of the standards committees concerned. Changes to standards are issued either as separate amendment sheets or in new editions of standards. An up-to-date listing of CGSB standards, including details on latest issues and amendments, a
8、nd ordering instniaions. will be found in the CGSB Catalogue, which is published annually and is available without charge upon request. Although the intended primary application of this standard is stated in its Scope. it is important to note that it remains the responsibility of the users of the st
9、andard to judge its suitability for their particular purpose. Many tests required by CGSB standards are inherently hazardous. CGSB neither assumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, wherever performed, CGSB takes no position respe
10、cting the validity of any patent rights asserted with any item connected with this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights are entirely their own responsibility. Further information on CGSB and its services and standards may
11、 be obtained from: The Manager Standardization information Division Canadian General Standards Board Ottawa. Canada KIA 1G6 The STANDARDS COUNCIL OF CANADA is the co-ordinating body of the National Standards System, a federation of independent, autonomous organizations working towards the further de
12、velopment and improvement of voluntary standardization in the national interest. The principal objectives of the Council are to foster and promote voluntary standardization as a means of advancing the national economy, benefiting the health, safety and welfare of the public, assisting and protecting
13、 the consumer, facilitating domestic and intemational trade, and furthering international co-operation in the field of standards. A National Standard of Canada is a standard which has been approved by the Standards Council of Canada and one which reflects a reasonable agreement among the views of a
14、number of capable individuals whose collective interests provide, to the greatest practicable extent, a balance of representation of producers, users, consumers and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard that is capable of making a sig
15、nificant and timely contribution to the national interest. Approval of a standard as a National Standard of Canada indicates that a standard conforms to the criteria and proCCdures established by the Standards Council of Canada. Approval does not refer to the technical content of the standard, this
16、remains the continuing responsibility of the accredited standards-writing organization. Those who have a need to apply standards are encouraged to use National Standards of Canada whenever practicable. These standards are subject to periodic review; therefore, users are cautioned to obtain the lates
17、t edition from the organization preparing the standard. The responsibility for approving National Standards of Canada rests with the: Standards Council of Canada 45 OConnor Street Suite 1200 Ottawa, Ontario K1P 6N7 (Canaah only) by Fax - (613) 941-8705 by Mail - CGSB Sales Centre Ottawa, Canada KIA
18、1G6 in Person - Suite 1402 222 Queen Street Ottawa, Ontario CGSB CANICGSB- 138.1-96 tt 2874650 0028535 130 = NATIONAL STANDARD OF CANADA CAN/ CGSB-138.1-96 Supersedes CAN/CGSB-138.1-M80 * FABRIC FOR CHAIN LINK FENCE Prepared by the Approved by the Canadian General Standards Board -3 Standards Counci
19、l of Canada ? Published February 1996 by the Canadian General Standards Board Ottawa, Canada K1A 1G6 Minister of Supply and Services Canada - 19% No part of this publication my be reproduced in any form without the prior permission of the publisher. CGSB CAN/CGSB- 138.1-76 * M L874b50 002853b O77 M
20、CANADIAN GENERAL STANDARDS BOARD Araujo, T. Bastarache, A. Berner, A. Bhardwaj, P. Fraser, G. Gladu, M. Hofstetter, C. Jacobson, H. Kelly, T. Kielbiski, M. Legare, N. Nielsen, J.P. Posner, C. Prost, M. Sanders, M. Talarico, F. Vachon, A. Villeneuve, D. Waldrum, G. Worth, A.W. Craig, W. Secretary COM
21、MITTEE ON WIRE FENCING (Membership at date of approval) Triodem Technical Services Ltd. Department of Public Works Canadian Fence Industry Association Ontario Hydro Frost Wire Products Ltd. Canadian Fence Industry Association McGowan Fence and Supply Allied Tube and Conduit Ministry of Transportatio
22、n, Ontario Metro Fence and Fittings Ltd. McLellan Supply Alberta Ltd. Department of National Defence Correctional Service of Canada Prost Cedar Products Ltd. Tree Island Industries Ltd. Groupe BMF Lundy Fence Department of Transport, Quebec Canadian Fence Industry Association Railway Association of
23、Canada Canadian General Standards Board c f Acknowledgnient is inade for the transhtion of this National Stcutdard of COMda by the Translation Bureau of the Department of the Secretary of State. CANKGSB-138.1-96 . 1. 1.1 1.2 2. 2.1 2.1.1 2. I .2 2.2 3. 3.1 CAN/CGSB-138.1-96 Supersedes CAN/CGSB-138.1
24、-M80 CANADIAN GENERAL STANDARDS BOARD FABRIC FOR CHAIN LINK FENCE SCOPE This stanud gives the requirements for various properties of chain link fence fabric useL -.i commercial and industrial applications. The testing and evaluation of a product against this standard may require the use of materials
25、 and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with a
26、ny existing applicable regulatory requirements prior to its use. REFERENCED PUBLICATIONS The following publications are referenced in this standard: Canadian Standards Association (CSA) G162.1 - Methods of Determining Mass of Coating on Zinc-Coated (Galvanized) Steel Wire. American Society for Testi
27、ng and Materials (ASTM) A 428 - Test Methods for Weight of Coating on Aluminum-Coated iron or Steel Particles B 6 - Specification for Zinc (Slab zinc) B 211 - Specification for Aluminum and Aluminum Alloy Bar, Rod and Wire D 412 - Test Methods for Rubber Properties in Tension D 792 - Test Methods fo
28、r Specific Gravity and Density of Plastics by Displacement D 1499 - Practice for Operating Light- and Water-Exposure Apparatus (Carbon-Arc Type) for Exposure of Plastics D 2240 - Standard Test Method for Rubber Property - Durometer Hardness G 23 - Practice for Operating Light- and Water-Exposure App
29、aratus (Carbon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials. A reference to a regulation is always to the latest issue. A dated reference is to the issue specified. An undated reference is to the latest issue, unless otherwise specified by the authority applying this standa
30、rd. The sources are given in the Notes section. TERMINOLOGY The following definitions apply in this standard: Chain Link Fence Fabric (Grillage mtallique) A fencing material made from wire helically wound and interwoven in such a manner as to provide a continuous mesh without knots or ties except in
31、 the form of knuckling or twisting of the ends of the wires to form the selvage of the fabric. Knuckling (Jointure) The type of selvage obtained by interlocking adjacent wire ends, in pairs, and then bending the wire ends back into a closed loop. 4. 4.1 5. 5.1 5.2 5.2.1 5.2.2 5.2.3 Style 1. Heavy -
32、CGSB CAN/CGSB- 138-1-96 * 1874650 0028538 94T W Grade Twisting (Torsade) The type of selvage obtained by twisting adjacent wire ends together, in pairs, in a close helix of 1-1/2 machine turns, which is equivalent to 3 full twists. The wire ends beyond the twist shall be at least 6 mm long. CLASSIFI
33、CATION The fence fabric shall be supplied in the following types, classes, styles and grades as shown in Table 1 and shall be as specified (par. 9.1): 1. Steel Fabric 2. Aluminum Alloy Fabric TABLE 1 Classification of Fabric Class A. Zinc-Coated Galvanized After Weaving B. Zinc-Coated Galvanized Bef
34、ore Coating 3. Light C. Aluminum-Coated 3. Light D. Vinyl-Coated NIA 1. Heavy -1 2. Medium NfA 3. Light 1. Heavy 2. Medium 3. Light GENERAL REQUIREMENTS Materiais and Workmanship - Materials used for the construction of chain link fence fabric shall be produced by methods recognized as good commerci
35、al practice. The fabric shall be of uniform quality and condition, and shall be free from any defects or imperfections that might adversely affect its serviceability and appearance. The base metal shall be of such quality and purity that when drawn to the size of wire specified, the finished fence f
36、abric shall be uniform and have the properties and characteristics as detailed in this standard. Manufacturing Progress Characteristics Typs I, Class A - Fabric that is zinc-coated after weaving shall be hotdip galvanized. The zinc coating shall be applied in a continuous process and shall not be ap
37、plied to the fabric in roil form. Type I, Class B - Fabric that is zinc-coated before weaving may be made from either electrolytically or hot-dip galvanized wire. I j Type I, Class C - Fabric that is aluminum-coated before weaving shall be hot dip coated. 2 CANICGSB-138.1-96 CGSB CAN/CGSB- 138.1-76
38、* W 1874b50 0028539 b m 5.2.4 5.2.5 6. 6.1 6.1.1 6.1.2 6.1.2.1 Type I, Class D - Fabric that is vinyl-coated shall be made from galvanized or aluminum-coated steel wire that meets the requirements of this standard. The fabric shall be vinyl-coated before weaving by a thermal extrusion or fusion proc
39、ess. Style of Fabric - The style of fabric is designated according to the diameter of the coated wire. DETAILED REQUIREMENTS Type 1, Classes A, B and C - Zinc- and Aluminum-Coated Steel Fabric Zinc - The slab zinc used for coating shall conform to ASTM B 6. Grude of Coating - The grade (mass per uni
40、t area of the zinc or aluminum coating) shall be as determined in par. 8.2.1. Type I, Class A - The grade for zinc-coated fabric after weaving shall be as follows: a. Grade 1 - The average mass per unit area of zinc coating shall not be less than 366 g/mz of uncoated wire surface, as determined from
41、 the average results of two or more specimens, and not less than 330 g/m2 of uncoated wire surface for any individual specimen. b. Grade 2 - The average mass per unit area of zinc coating shall not be less than 490 g/mz of uncoated wire surface, as determined from the average results of two or more
42、specimens, and not less than 440 g/m2 of uncoated wire surface for any individual specimen. c. Grade 3 - The average mass per unit area of zinc coating shall be not less than 610 g/m2 of uncoated wire surface, as determined from the average results of two or more specimens, and not less than 550 g/m
43、z of uncoated wire surface for any individual specimen. 6.1.2.2 Type 1, Class B - The grade for zinc-coated fabric before weaving shall be as follows: a. Grade 1 - The average mass per unit area of zinc coating shall not be less than 366 g/m2 of uncoated wire surface, as determined from the average
44、results of two or more specimens, and not less than 330 g/mz of uncoated wire surface for any individual specimen. b. Grade 2 - The average mass per unit area of zinc coating shall not be less than 490 g/mz of uncoated wire surface, as determined from the average results of two or more specimens, an
45、d not less than 440 g/m2 of uncoated wire surface for any individual specimens. c. Grade 3 - The average mass per unit area of zinc coating shall not be less than 610 g/mz of uncoated wire surface, as determined from the average results of two or more specimens, and not less than 550 g/mz of uncoate
46、d wire surface for any individual specimens. 6.1.2.3 Type 1, Class C - The grade for aluminum-coated fabric shall be as follows: a. Grade 1 - The average mass per unit area of aluminum coating shall not be less than 107 g/mz of uncoated wire b. Grade 2 - The average mass per unit area of aluminum co
47、ating shall not be less than 122 g/m2 of uncoated wire surface. surface. 6.1.3 Adhesiun - The zinc or aluminum coating shall adhere to the wire without flaking or being removed by rubbing with bare fingers when tested according to par. 8.2.2*. Type 1, Class D - Vinyl-Coated Fabric Zinc - The slab zi
48、nc used for coating of the steel core wire shall conform to ASTM B 6. 6.2 6.2.1 * 6.2.2 Mass Per Unit Area of Core Wire Coaing - The mass per unit area of zinc or aluminum coating shall be as determined in par. 8.2.1 and as specified (par. 9.1). Only ailable as electrolytically zinc-coated. Loosenin
49、g or detachment during the adhesion test of supetjcial, small particules of zinc formed by niechanical polishing of the surface of zinc-coated wire shall not be considered cause for rejection CANKGSB-138.1-96 3 6.2.2.1 6.2.3 6.2.4 6.2.5 6.2.6 6.2.7 Nominal Nominal Diameter* of Diameter of Style Vinyl-Coated Coated Core Finished Wire Wire mm mm 1 4.26 3.5 2 3.76 3.0 3 2.96 2.2 6.2.8 Vinyl Coating Thickness mm 0.380 0.380 0.380 6.3 6.3.1 6.4 6.4.1 6.4.2 CGSB CAN/CGSB- 138-1-96 * 1874650 0028540 578 The mass per unit area of zinc or aluminum coating sha
