1、CAN/CSA-C22.2 No. 60745-2-3-07(IEC 60745-2-3:2006, MOD)A National Standard of Canada(reaffirmed 2012)Hand-held motor-operated electric tools safety part 2-3: Particular requirements for grinders, polishers and disk-type sandersLegal Notice for StandardsCanadian Standards Association (CSA) standards
2、are developed through a consensus standards development process approved by theStandards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensusand develop a standard. Although CSA administers the process and establishes rules to p
3、romote fairness in achieving consensus, it doesnot independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, withoutlimitation, imp
4、lied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or itsnon-infringement of any third partys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of anyof the information published in this docum
5、ent. CSA makes no representations or warranties regarding this documents compliance withany applicable statute, rule, or regulation.IN NO EVENT SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES,DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR
6、 INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES,HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESSINTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT,TORT (INCLUDING NEGLIGENCE), OR ANY OTH
7、ER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO ORPOSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS,COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professional or
8、 other services for or on behalf of anyperson or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document isdirected to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no responsibility
9、whatsoever arising in any way from any and all use of or reliance on the information contained in this document.CSA is a private not-for-profit company that publishes voluntary standards and related documents. CSA has no power, nor does itundertake, to enforce compliance with the contents of the sta
10、ndards or other documents it publishes.Intellectual property rights and ownershipAs between CSA and the users of this document (whether it be in printed or electronic form), CSA is the owner, or the authorizedlicensee, of all works contained herein that are protected by copyright, all trade-marks (e
11、xcept as otherwise noted to the contrary), andall inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protectedby patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure
12、 of this documentmay violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or others to seek legalredress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves all intellectualproperty right
13、s in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA shall not be heldresponsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the
14、 validity ofany such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA for informational and non-commercial use only. The user of this document is authorized to doonly the following:If this document is in electronic form:.load th
15、is document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document.Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA to have suchcopies, and only if this Legal Notice appears on
16、each such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Notice from the attached standard;.sell this document without authorization from CSA; or.make an electronic copy of this document.If you do not agree with any of the terms and c
17、onditions contained in this Legal Notice, you may not load or use this document ormake any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of thisdocument constitutes your acceptance of the terms and conditions of this Legal Notice.Sta
18、ndards Update ServiceCAN/CSA-C22.2 No. 60745-2-3-07May 2007Title: Hand-held motor-operated electric tools safety part 2-3: Particular requirements for grinders, polishers and disk-type sandersPagination: 40 pages (vi preliminary and 34 text)To register for e-mail notification about any updates to th
19、is publicationgo to shop.csa.caclick on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2418333.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legal to find out h
20、ow we protect your personal information.The Canadian Standards Association (CSA), under whose auspices this National Standard has been produced, was chartered in 1919 and accredited by the Standards Council of Canada to the National Standards system in 1973. It is a not-for-profit, nonstatutory, vol
21、untary membership association engaged in standards development and certification activities. CSA standards reflect a national consensus of producers and users including manufacturers, consumers, retailers, unions and professional organizations, and governmental agencies. The standards are used widel
22、y by industry and commerce and often adopted by municipal, provincial, and federal governments in their regulations, particularly in the fields of health, safety, building and construction, and the environment. Individuals, companies, and associations across Canada indicate their support for CSAs st
23、andards development by volunteering their time and skills to CSA Committee work and supporting the Associations objectives through sustaining memberships. The more than 7000 committee volunteers and the 2000 sustaining memberships together form CSAs total membership from which its Directors are chos
24、en. Sustaining memberships represent a major source of income for CSAs standards development activities. The Association offers certification and testing services in support of and as an extension to its standards development activities. To ensure the integrity of its certification process, the Asso
25、ciation regularly and continually audits and inspects products that bear the CSA Mark. In addition to its head office and laboratory complex in Toronto, CSA has regional branch offices in major centres across Canada and inspection and testing agencies in eight countries. Since 1919, the Association
26、has developed the necessary expertise to meet its corporate mission: CSA is an independent service organization whose mission is to provide an open and effective forum for activities facilitating the exchange of goods and services through the use of standards, certification and related services to m
27、eet national and international needs.For further information on CSA services, write toCanadian Standards Association5060 Spectrum Way, Suite 100Mississauga, Ontario, L4W 5N6CanadaThe Standards Council of Canada (SCC) is thecoordinating body of the National StandardsSystem, a coalition of independent
28、, autonomousorganizations working towards the furtherdevelopment and improvement of voluntarystandardization in the national interest.The principal objects of the SCC are to fosterand promote voluntary standardization as a meansof advancing the national economy, benefiting thehealth, safety, and wel
29、fare of the public, assistingand protecting the consumer, facilitating domesticand international trade, and furthering internationalcooperation in the field of standards.A National Standard of Canada (NSC) is a standardprepared or reviewed by an accredited Standards Development Organization (SDO) an
30、d approved by the SCC according to the requirements of CAN-P-2. Approval does not refer to the technical content of the standard; this remains the continuing responsibility of the SDO. An NSC reflects a consensus of a number of capable individuals whose collective interests provide, to the greatest
31、practicable extent, a balance of representation of general interests, producers, regulators, users (including consumers), and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard which is capable of making a significant and timely contribution to th
32、e national interest.Those who have a need to apply standards areencouraged to use NSCs. These standards are subjectto periodic review. Users of NSCs are cautionedto obtain the latest edition from the SDO which publishes the standard.The responsibility for approving standards as National Standards of
33、 Canada rests with theStandards Council of Canada270 Albert Street, Suite 200Ottawa, Ontario, K1P 6N7CanadaCette Norme nationale du Canada est offerte en anglais et en franais.Although the intended primary application of this Standard is stated in its Scope, it is importantto note that it remains th
34、e responsibility of the users to judge its suitability for their particular purpose.Registered trade-mark of Canadian Standards AssociationCanadian Standards AssociationCAN/CSA-C22.2 No. 60745-2-3-07Second Edition(IEC 60745-2-3:2006, MOD)Underwriters Laboratories Inc.UL 60745-2-3Second EditionHand-H
35、eld Motor-Operated Electric Tools Safety Part 2-3:Particular requirements for Grinders, Polishers and Disk-Type SandersMAY 31, 2007ANSI/UL 60745-2-3-2007This national standard is based on publication IEC 60745-2-3, second edition (2006). Commitment for Amendments This standard is issued jointly by t
36、he Canadian Standards Association (CSA) and Underwriters Laboratories Inc. (UL). Comments or proposals for revisions on any part of the standard may be submitted to CSA or UL at any time. Revisions to this standard will be made only after processing according to the standards development procedures
37、of CSA and UL. CSA and UL will issue revisions to this standard by means of a new edition or revised or additional pages bearing their date of issue. _ ISBN 1-55436-430-2 2007 Canadian Standards Association All rights reserved. No part of this publication may be reproduced in any form whatsoever wit
38、hout the prior permission of the publisher. To purchase CSA Standards and related publications, visit CSAs Online Store at www.ShopCSA.ca or call toll-free 1-800-463-6727 or 416-747-4044. _ Copyright 2007 Underwriters Laboratories Inc. Revisions of this Standard will be made by issuing revised or ad
39、ditional pages bearing their date of issue. A UL Standard is current only if it incorporates the most recently adopted revisions, all of which are itemized on the transmittal notice that accompanies the latest set of revised requirements. Comments or proposals for revisions on any part of the Standa
40、rd may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. The most recent designation of ANSI/UL 60745-2-3 as an American National Standard (ANSI) occurred on May 31, 2007. The ANSI approval
41、 for this standard does not include the Cover Page, Transmittal Pages, or the Title Page. This ANSI/UL Standard for Safety, which consists of the Second edition, is under continuous maintenance, whereby each revision is ANSI approved upon publication. To purchase UL Standards, visit COMM 2000 at htt
42、p:/m- help/how_to_order.aspx or call toll-free 1-888-853-3503. _ MAY 31, 2007 CAN/CSA-C22.2 No. 60745-2-3-07 UL 60745-2-3 iii CONTENTS Preface iv Canadian/US National Differences . vi IEC 60745-2-3, Hand-Held Motor-Operated Electric Tools Safety Part 2-3: Particular Requirements for Grinders, Polish
43、ers and Disk-Type Sanders 1 Foreword 2 1 Scope . 5 2 Normative references . 5 3 Definitions. 5 4 General requirements. 7 5 General conditions for the tests 8 6 Void 8 7 Classification 8 8 Marking and instructions 8 9 Protection against access to live parts. 13 10 Starting . 13 11 Input and current 1
44、3 12 Heating . 13 13 Leakage current 13 14 Moisture resistance 13 15 Electric strength 13 16 Overload protection of transformers and associated circuits . 14 17 Endurance 14 18 Abnormal operation 14 19 Mechanical hazards . 14 20 Mechanical strength . 18 21 Construction . 20 22 Internal wiring . 21 2
45、3 Components . 21 24 Supply connection and external flexible cords. 21 25 Terminals for external conductors 21 26 Provision for earthing . 21 27 Screws and connections 21 28 Creepage distances, clearances and distances through insulation. 21 29 Resistance to heat, fire and tracking 21 30 Resistance
46、to rusting 22 31 Radiation, toxicity and similar hazards. 22 Annexes 33 Annex K (normative) Battery tools and battery packs . 33 Annex L (normative) Battery tools and battery packs provided with mains connection or non-isolated sources 33 Annex AA (informative) Material and thickness of guards. 33 B
47、ibliography 34 iv CAN/CSA-C22.2 No. 60745-2-3-07 UL 60745-2-3 MAY 31, 2007 Preface This is the common CSA and UL standard for Hand-Held Motor-Operated Electric Tools Safety Part 2-3: Particular Requirements for Grinders, Polishers and Disk-Type Sanders. It is the second edition of CAN/CSA-C22.2 No.
48、60745-2-3 and the second edition of UL 60745-2-3. This standard is based on IEC 60745-2-3, second edition. The first edition of this standard was designated CAN/CSA-C22.2 No. 745-2-3/UL 745-2-3. This standard CAN/CSA-C22.2 No. 60745-2-3/UL 60745-2-3, second edition, supersedes: (a) the first edition
49、 of CAN/CSA-C22.2 No. 745-2-3/UL 745-2-3, published in 1995; and (b) CAN/CSA-C22.2 No. 745-4-3/UL 745-4-3 (requirements for battery tools and battery packs are now incorporated into the requirements of CAN/CSA-C22.2 No. 60745-2-3, second edition, and UL 60745-2-3, second edition). The standard number has been aligned to correspond with the equivalent IEC 60745-2-3 stand
