1、Amendment 1: Hand-held motor-operated electric tools Safety Part 2-6: Particul ar requirements for hammersAmendment 1:2006 (IDT) toNational Standard of CanadaCAN/CSA-C22.2 No. 60745-2-6-04(IEC 60745-2-6:2003, MOD)(reaffirmed 2013)NOT FOR RESALE. / PUBLICATION NON DESTINE LA REVENTE.Standards Update
2、ServiceAmendment 1:2006 (IDT) toCAN/CSA-C22.2 No. 60745-2-6-04October 2006Title:Amendment 1: Hand-held motor-operated electric tools Sa fety Part 2-6: Particular requirements for hammersPagination:7 pages To register for e-mail notification about any updates to this publicationgo to shop.csa.caclick
3、 on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2416811.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legal to find out how we protect your personal informat
4、ion.Canadian Standards AssociationAmendment 1:2006 (IDT) to National Standard of CanadaCAN/CSA-C22.2 No. 60745-2-6-04, Second Edition(IEC 60745-2-6:2003, MOD)Underwriters Laboratories Inc.UL 60745-2-6Second EditionAmendment 1Hand-Held Motor-Operated Electric Tools Safety Part 2-6:Particular Requirem
5、ents for HammersAmendment publication date: OCTOBER 31, 2006This amendment is an adoption of IEC Amendment 1 (2006) to publication IEC 60745-2-6, Second Edition (2003).ANSI/UL 60745-2-6-2006 2006Canadian Standards AssociationAll rights reserved. No part of this publication may be reproduced in any f
6、orm whatsoever without the prior permission of the publisher.Amendment 1:2006 to International Standard IEC 60745-2-6:2003 has been adopted without modification (IDT) as Amendment 1:2006 to CAN/CSA-C22.2 No. 60745-2-6-04. The French version of this Amendment is incorporated in the French edition of
7、CAN/CSA-C22.2 No. 60745-2-6-04. This Amendment was reviewed by the CSA Subcommittee on Portable Electric Tools, under the jurisdiction of the CSA Technical Committee on Consumer and Commercial Products and the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been forma
8、lly approved by the CSA Technical Committee.October 2006ISBN 0-7629-0914-5Copyright 2006 Underwriters Laboratories Inc.Revisions of this Standard will be made by issuing revised or additional pages bearing their date of issue. A UL Standard is current only if it incorporates the most recently adopte
9、d revisions, all of which are itemized on the transmittal notice that accompanies the latest set of revised requirements. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborat
10、ive Standards Development System (CSDS) at http:/.The most recent designation of ANSI/UL 60745-2-6 as an American National Standard (ANSI) occurred on September 1, 2006. The ANSI approval for this standard does not include the Cover Page, Transmittal Pages, Title Page, or Preface.This ANSI/UL Standa
11、rd for Safety, which consists of the Second edition with revisions through October 31, 2006, is under continuous maintenance, whereby each revision is ANSI approved upon publication.NORME INTERNATIONALE CEIIECINTERNATIONAL STANDARD 60745-2-62003AMENDEMENT 1AMENDMENT 12006-01Amendement 1 Outils lectr
12、oportatifs moteur Scurit Partie 2-6: Rgles particulires pour les marteaux Amendment 1 Hand-held motor-operated electric tools Safety Part 2-6: Particular requirements for hammers Pour prix, voir catalogue en vigueur For price, see current catalogue IEC 2006 Droits de reproduction rservs Copyright -
13、all rights reserved International Electrotechnical Commission, 3, rue de Varemb, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmailiec.ch Web: www.iec.ch Commission Electrotechnique InternationaleInternational Electrotechnical Commission C
14、CODE PRIX PRICE CODE 60745-2-6 Amend. 1 IEC:2006 2 FOREWORD This amendment has been prepared by subcommittee 61F: Safety of hand-held motor-operated electric tools, of IEC technical committee 61: Safety of household and similar electrical appliances. The text of this amendment is based on the follow
15、ing documents: FDIS Report on voting 61F/622/FDIS 61F/630/RVD Full information on the voting for the approval of this amendment can be found in the report on voting indicated in the above table. The committee has decided that the contents of this amendment and the base publication will remain unchan
16、ged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. _ 20 Mechanical strength 20.3 Replacement: Add t
17、o the existing replacement the following first paragraph. Hammers up to 10 kg shall withstand being dropped three times on a surface from a height of 1 m. The sample shall be positioned to vary the point of impact. Amendment 1:2006 to CAN/CSA-C22.2 No. 60745-2-6-0460745-2-6 Amend. 1 IEC:2006 3 21 Co
18、nstruction Replace the existing text of Clause 21 by the following: This clause of Part 1 is applicable, except as follows: 21.18 Addition: Percussion hammers and rotary hammers operating in the percussion mode may have a switch with a locking arrangement to lock it in the “on” position. For these t
19、ools, the requirement in 21.18 is met if the switch can be unlocked without releasing the grasp on the tool. For rotary hammers, a switch lock-on device, if any, shall be located outside the grasping area or so designed that it is not likely to be unintentionally locked on by the users hand during i
20、ntended left- or right-handed operation. Compliance is checked by inspection or by a manual test. For a switch with a lock-on button in a recess within the grasping area, the lock-on button shall not be actuated by a straight-edged utensil when the utensil is made to pass back and forth across the d
21、evice in any direction. The straight edge of the utensil must be of sufficient length to bridge the surface of the lock-on device and any surface adjacent to the lock-on device. _ Amendment 1:2006 to CAN/CSA-C22.2 No. 60745-2-6-04ICS 25.140.20 PRINTEDIN CANADAIMPRIMEAU CANADACopyright NoticeThis Ame
22、ndment to the International Standard contains information copyright protected by theInternational Electrotechnical Commission (IEC). Except as permitted under the laws of Canada, no extract ofthis Amendment to the International Standard may be reproduced, stored in any retrieval system, ortransmitte
23、d in any form or by any means, electronic, photocopying, recording, or otherwise, without priorpermission from the Standards Council of Canada (SCC). Requests for permission to reproduce thisAmendment to the International Standard or parts thereof should be addressed to Manager, Technical Document C
24、entre Standards Council of Canada 270 Albert Street, Suite 200 Ottawa, Ontario K1P 6N7 The Canadian adoption of this Amendment to the International Standard contains information copyrightprotected by the Canadian Standards Association. All rights reserved. No part of this adopted Amendmentmay be rep
25、roduced in any form whatsoever without the prior permission of the publisher. IEC material isreprinted with permission. Requests for permission to reproduce this adopted Amendment or parts thereofshould be addressed to Director, Information Products Canadian Standards Association 5060 Spectrum Way, Suite 100 Mississauga, Ontario L4W 5N6 Copyright violators will be prosecuted to the full extent of the law.
