1、Amendment 1: Hand-held motor-operated electric tools Safety Part 2-8: Particular requirements for shears and nibblersAmendment 1:2009 (IDT) toNational Standard of CanadaCAN/CSA-C22.2 No. 60745-2-8-04(IEC 60745-2-8:2003, IDT)(reaffirmed 2013)NOT FOR RESALE. / PUBLICATION NON DESTINE LA REVENTE.Standa
2、rds Update ServiceAmendment 1:2009 (IDT) toCAN/CSA-C22.2 No. 60745-2-8-04March 2009Title: Amendment 1: Hand-held motor-operated electric tools Safety Part 2-8: Particular requirements for shears and nibblersPagination:7 pages To register for e-mail notification about any updates to this publicationg
3、o to shop.csa.caclick on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2416802.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legal to find out how we protect y
4、our personal information.Canadian Standards AssociationAmendment 1:2009 (IDT) to National Standard of CanadaCAN/CSA-C22.2 No. 60745-2-8-04, Second Edition(IEC 60745-2-8:2003, IDT)Underwriters Laboratories Inc.UL 60745-2-8Second EditionAmendment 1Hand-held motor-operated electric tools Safety Part 2-
5、8:Particular requirements for shears and nibblersAmendment publication date: MARCH 13, 2009This amendment is an adoption of IEC Amendment 1 (2008) to publication IEC 60745-2-8, Second Edition (2003).ANSI/UL 60745-2-8-2009 2009Canadian Standards AssociationAll rights reserved. No part of this publica
6、tion may be reproduced in any form whatsoever without the prior permission of the publisher.Amendment 1:2008 to International Standard IEC 60745-2-8:2003 has been adopted without modification (IDT) as Amendment 1:2009 to CAN/CSA-C22.2 No. 60745-2-8-04. This Amendment was reviewed by the CSA Subcommi
7、ttee on Portable Electric Tools, under the jurisdiction of the CSA Technical Committee on Consumer and Commercial Products and the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the CSA Technical Committee.March 2009Copyright 2009 Underwrite
8、rs Laboratories Inc.Revisions of this Standard will be made by issuing revised or additional pages bearing their date of issue. A UL Standard is current only if it incorporates the most recently adopted revisions, all of which are itemized on the transmittal notice that accompanies the latest set of
9、 revised requirements. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/.The most recent designation of ANSI/UL 60745-2-8
10、as an American National Standard (ANSI) occurred on March 13, 2009. This ANSI/UL Standard for Safety, which consists of the Second edition with revisions through March 13, 2009, is under continuous maintenance, whereby each revision is ANSI approved upon publication.IEC 60745-2-8Edition 2.0 2008-05I
11、NTERNATIONAL STANDARD NORME INTERNATIONALEHand-held motor-operated electric tools Safety Part 2-8: Particular requirements for shears and nibblers Outils lectroportatifs moteur Scurit Partie 2-8: Rgles particulires pour les cisailles mtaux et les grignoteuses INTERNATIONAL ELECTROTECHNICAL COMMISSIO
12、N COMMISSION ELECTROTECHNIQUE INTERNATIONALE CICS 25.140.20; 25.140.30; 25.140.10 PRICE CODECODE PRIXAMENDMENT 1 AMENDEMENT 1 2 60745-2-8 Amend. 1 IEC:2008 FOREWORD This amendment has been prepared by subcommittee 61F: Safety of hand-held motor-operated electric tools, of IEC technical committee 61:
13、 Safety of household and similar electrical appliances. The text of this amendment is based on the following documents: FDIS Report on voting 61F/735/FDIS 61F/755/RVD Full information on the voting for the approval of this amendment can be found in the report on voting indicated in the above table.
14、With this amendment, this Part 2 is established on the basis of the fourth edition (2006) of IEC 60745-1, Hand-held motor-operated electric tools Safety Part 1: General requirements. Main changes include editorial modifications to match with the fourth edition of IEC 60745-1 and clarifications in An
15、nex K. The committee has decided that the contents of this amendment and the base publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be rec
16、onfirmed, withdrawn, replaced by a revised edition, or amended. _ 1 Scope Replace the existing text of Clause 1 by the following: This clause of Part 1 is applicable except as follows: Addition: This standard applies to shears and nibblers. 3 Definitions Change the title of Clause 3 to read: 3 Terms
17、 and definitions 20 Mechanical strength Replace the existing text of Clause 20 by the following: Amendment 1:2009 to CAN/CSA-C22.2 No. 60745-2-8-0460745-2-8 Amend. 1 IEC:2008 3 This clause of Part 1 is applicable, except as follows: 20.5 This subclause is not applicable. 21 Construction Replace the
18、existing text of Clause 21 by the following: This clause of Part 1 is applicable, except as follows: 21.32 This subclause is not applicable. Annexes Replace the existing texts of Annexes K and L by the following: Annex K (normative) Battery tools and battery packs K.1 Addition: All clauses of this P
19、art 2 apply unless otherwise specified in this annex. K.12.4 This subclause of Part 2 is not applicable. K.24.4 This subclause of Part 2 is not applicable. Annex L (normative) Battery tools and battery packs provided with mains connection or non-isolated sources L.1 Addition: All clauses of this Par
20、t 2 apply unless otherwise specified in this annex. _ Amendment 1:2009 to CAN/CSA-C22.2 No. 60745-2-8-04PRINTED IN CANADAIMPRIMEAU CANADA100%The Canadian Standards Association (CSA) prints its publications on Rolland Enviro100, which contains 100% recycled post-consumer fibre, is EcoLogo and Process
21、ed Chlorine Free certified, and was manufactured using biogas energy.Copyright NoticeThis Amendment to the International Standard contains information copyright protected by theInternational Electrotechnical Commission (IEC). Except as permitted under the laws of Canada, no extract ofthis Amendment
22、to the International Standard may be reproduced, stored in any retrieval system, ortransmitted in any form or by any means, electronic, photocopying, recording, or otherwise, without priorpermission from the Standards Council of Canada (SCC). Requests for permission to reproduce thisAmendment to the
23、 International Standard or parts thereof should be addressed to Manager, Technical Document Centre Standards Council of Canada 270 Albert Street, Suite 200 Ottawa, Ontario K1P 6N7 The Canadian adoption of this Amendment to the International Standard contains information copyrightprotected by the Can
24、adian Standards Association. All rights reserved. No part of this adopted Amendmentmay be reproduced in any form whatsoever without the prior permission of the publisher. IEC material isreprinted with permission. Requests for permission to reproduce this adopted Amendment or parts thereofshould be addressed to Director, Information Products Canadian Standards Association 5060 Spectrum Way, Suite 100 Mississauga, Ontario L4W 5N6 Copyright violators will be prosecuted to the full extent of the law.
