1、CAN/CSA-C22.2 No. 745-2-36-95A National Standard of Canada(reaffirmed 2014)Safety of portable electric tools Part 2: Particular requirements for hand motor toolsLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards develo
2、pment process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it
3、 does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning
4、 this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no represen
5、tations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAG
6、ES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF L
7、IABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or
8、 other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no respon
9、sibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with
10、the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are prote
11、cted by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized us
12、e, modification, copying, or disclosure of this document may violate laws that protect CSA Groups and/or others intellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence o
13、r by law, CSA Group reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Use
14、rs of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authoriz
15、ed to do only the following:If this document is in electronic form:sLOADTHISDOCUMENTONTOACOMPUTERFORTHESOLEPURPOSEOFREVIEWINGITsSEARCHANDBROWSETHISDOCUMENTANDsPRINTTHISDOCUMENTIFITISIN0$ this remains the continuing responsibility of the SDO. An NSC reflects a consensus of a number of capable individ
16、uals whose collective interests provide, to the greatest practicable extent, a balance of representation of general interests, producers, regulators, users (including consumers), and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard which is capa
17、ble of making a significant and timely contribution to the national interest.Those who have a need to apply standards areencouraged to use NSCs. These standards are subjectto periodic review. Users of NSCs are cautionedto obtain the latest edition from the SDO which publishes the standard.The respon
18、sibility for approving standards as National Standards of Canada rests with theStandards Council of Canada270 Albert Street, Suite 200Ottawa, Ontario, K1P 6N7CanadaCette Norme nationale du Canada est offerte en anglais et en franais.Although the intended primary application of this Standard is state
19、d in its Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.TMA trade-mark of the Canadian Standards Association, operating as “CSA Group”Canadian Standards Association CAN/CSA-C22.2 No. 745-2-36 First Edition Approved
20、by Standards Council of Canada Underwriters Laboratories Inc. UL 745-2-36 First Edition Particular Requirements for Hand Motor Tools March 23, 1995 Commitment for Amendments This Standard is issued jointly by Canadian Standards Association and Underwriters Laboratories Incorporated. Amendments to th
21、is Standard will be made only after processing according to the Standards writing procedures by both Canadian Standards Association and Underwriters Laboratories Incorporated. ISSN 031 7-5669 ISBN 1-55989-782-1 Copyright 1995 Canadian Standards Copyright 1995 Underwriters Association Laboratories In
22、corporated Inc. All rights reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior permission of the publisher. March 23, 1995 CSA-C22.2 No. 745-2-36 IJL 745-2-36 3 Contents Preface 5 Foreword (GSA) 7 Foreword (UL) g 1. S
23、cope 11 2. Definitions 11 3. General requirement 11 4. General notes on tests 11 5. Rating 11 6. Classification 11 7. Marking 11 8. Protection against electric shock 11 9. Starting 12 10. lnputand current 12 11. Heating 12 12. Leakage current 12 13. Radio and television interference suppression 12 1
24、4. Moisture resistance 12 15. Insutation resistance and electric strength 12 16. Endurance 12 17. Abnormal operation 12 18. Mechanical hazards 12 19. Mechanical strength 12 20. Construction 12 4 CSA-C22.2 No. 745-2-36 UL 745-2-36 March 23, 1995 21. Internalwiring 13 22. Components 13 23. SUpply.conn
25、ection and external flexible cables and cords 13 a4.Terrpirials for external conductors 13 25: Provision frehig 13 26.: Screws and connections 13 27 Creepage distances, clearances and distances through insulation 13 28 Resistance to heat, fire and tracking 13 29, R?:sistance to rusting 13 3OlTiStt.b
26、y:Manufacturer 13 31. .instrutins 14 Appendix k I ThermaJ cutoutsnd pacd releases 15 Appendix B Electthnic:ircuits 15 Appendix C Construction of safetyisolating transformers 15 Appendix: D MeasuremeAt of creepage distances and clearris 15 Appendix E Reference standards 15 Appendix F Attachments and
27、accessories 15 Appendix G Sequence of tests 15 Appendix: H Translations 16 March 23, 1995 CSA-C22.2 No. 745-2-36 4 UL 745-2-36 5 Pref ace This is the common CSA and UL Standard for portable electric hand motor tools. It is the first edition of CSA Standard CAN/CSA-C22.2 No. 745-2-36, Safety of porta
28、ble electric tools Part 2: Particular requirements for hand motor tools and UL 745-2-36, Safety of portable electric tools Part 2: Particular requirements for hand motor tools. It is written in SI (metric) units. It will coexist with the CSA Standard CAN!CSA-C22.2 No. 71.1 for the period given in CS
29、A Certification Notice Electrical Tools No. 6. This Standard was prepared by the Canadian Standards Association and Underwriters Laboratories Inc. It contains particular requirements and is intended to be used in conjunction with the general Standard CAN/CSA-C22.2 No. 745-1/UL 745-1. Where a clause
30、of the general Standard (CAN!CSA-C22.2 No. 745-1/UL 745-1) is not mentioned in this Standard, the clause applies as far as is reasonable. Where this particular Standard states addition, modification, or replacement, the relevant requirement, test specification, or explanatory matter in the general S
31、tandard (CAN/CSA-C22.2 No. 745-1/UL 745-1) should be adapted accordingly. If the functions of a tool are covered by different particular Standards, the relevant particular Standard is applied to each function separately, so far as is reasonable. If applicable, the influence of one function on the ot
32、her is taken into account. This Standard was reviewed by the CSA Subcommittee on Portable Electric Tools of the Technical Committee on Consumer and Commercial Products under the jurisdiction of the Standards Steering Committee on the Canadian Electrical Code, Part II, and was formally approved by th
33、ese Committees. This Standard was processed and reviewed in accordance with the method of development, revision, and implementation of UL Standards for safety. This Standard has been approved by the Standards Council of Canada as a National Standard of Canada and it will be submitted to the American
34、 National Standards Institute (ANSI) for publication as an American National Standard. March 23, 1995 UL Ellective Date As of June 1, 2007, all products Listed or Recognized by UL must comply with the requirements in this Standard. Between June 1, 2002 and June 1, 2007, new product submittals to UL
35、must be evaluated under all requirements in this standard. Between March 23, 1995 and June 1, 2002, new product submittals to UL may be evaluated under all requirements in this Standard or, if requested in writing, evaluated under presently effective requirements only. The presently effective requir
36、ements are contained in the seventh edition of UL 45. CSA Effective Date The effective date for CSA will be announced through CSA Certification Notice Electrical Tools No. 6. Note: Although the intended primary application of this Standard is stated in its Scope, it is important to note that it rema
37、ins the responsibility of the users of the Standard to judge its suitability for their particular purpose. 6 CSA-C22.2 No. 745-2-36 IJL 745-2-36 March 23, 1995 March 23, 1995 CSA-C22.2 No. 745-2-36 IlL 745-2-36 7 Foreword (CSA) Certification organizations, as accredited by the Standards Council of C
38、anada, have their own criteria procedures for certification services. The following paragraphs define CSA Certification policies. The Canadian Standards Association provides certification services for manufacturers who, under license from CSA, wish to use the appropriate registered CSA Marks on cert
39、ain products of their manufacture to indicate conformity with CSA Standards. CSA Certification for a number of products is provided in the interest of maintaining agreed-upon standards of quality, performance, interchangeability and/or safety, as appropriate. Where applicable, certification may form
40、 the basis for acceptance by inspection authorities responsible for enforcement of regulations. Where feasible, programs will be developed for additional products for which certification is desired by producers, consumers or other interests. In performing its functions in accordance with its objecti
41、ves, CSA does not assume or undertake to discharge any responsibility of the manufacturer or any other party. The opinions and findings of the Association represent its professional judgement given with due consideration to the necessity limitations of practical operation and state of the art at the
42、 time the Standard is processed. Products in substantial accord with this Standard but which exhibit a minor difference or a new feature may be deemed to meet the Standard providing the feature or difference is found acceptable utilizing appropriate CSA Certification Division Operating Procedures. P
43、roducts which comply with this Standard shall not be certified if they are found to have additional features which are inconsistent with the intent of this Standard. Products shall not be certifiable if they are discovered to contravene applicable Federal laws or regulations. Testing techniques, tes
44、t procedures and instrumentation frequently must be prescribed by the CSA Certification Division in addition to the technical requirements contained in Standards of CSA. In addition to markings specified in the Standard the CSA Certification and Testing Division may require special cautions, marking
45、s and instructions that are not specified by the Standard. Some tests required by CSA Standards may be inherently hazardous. The Association neither assumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, wherever performed, whether performed
46、in whole or in part by the manufacturer or the Association, and whether or not any equipment, facility or personnel for in connection with the test is furnished by the manufacturer or the Association. Manufacturers should note that, in the event of the failure of the CSA Certification and Testing Di
47、vision to resolve an issue arising from the interpretation of requirements, there is an appeal procedure: the complainant should submit the matter, in writing, to the Secretary of the Canadian Standards Association. If this Standard is to be used in obtaining CSA Certification please remember, when
48、making application for certification, to request all current Amendments, Bulletins, Notices and Technical Information Letters that may be applicable and for which there may be a nominal charge. For such information or for further information concerning details about CSA Certification please address
49、your inquiry to the Applications and Records Section, Canadian Standards Association, 178 Rexdale Boulevard, Rexdale (Toronto), Ontario M9W 1R3. March 23, 1995 CSA-C22.2 No. 745-2-36 UL 745-2-36 9 Foreword (UL) A. This Standard contains basic requirements for products covered by Underwriters Laboratories Inc. (UL) under its Foflow-Up Service for this category within th
