1、 Reference numberISO 14025:2006(E)ISO 2006Environmental labels and declarations Type III environmental declarations Principles and procedures Marquages et dclarations environnementaux Dclarations environnementales de Type III Principes et modes opratoires National Standard of CanadaCAN/CSA-ISO 14025
2、:07(ISO 14025:2006)International Standard ISO 14025:2006 (first edition, 2006-07-01) has been adopted without modification(IDT) as CSA Standard CAN/CSA-ISO 14025:07, which has been approved as a National Standard of Canadaby the Standards Council of Canada.ISBN 1-55436-461-2 February 2007 Internatio
3、nal Organization for Standardization (ISO), 2006. All rights reserved. NOT FOR RESALE. Legal Notice for StandardsCanadian Standards Association (CSA) standards are developed through a consensus standards development process approved by theStandards Council of Canada. This process brings together vol
4、unteers representing varied viewpoints and interests to achieve consensusand develop a standard. Although CSA administers the process and establishes rules to promote fairness in achieving consensus, it doesnot independently test, evaluate, or verify the content of standards.Disclaimer and exclusion
5、 of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, withoutlimitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or itsnon-infringement
6、 of any third partys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of anyof the information published in this document. CSA makes no representations or warranties regarding this documents compliance withany applicable statute, rule, or regulation.IN NO EV
7、ENT SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES,DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES,HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST
8、REVENUE, BUSINESSINTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT,TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO ORPOSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE
9、 POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS,COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professional or other services for or on behalf of anyperson or entity or to perform any duty owed by any person or entity to another person or entity. The
10、 information in this document isdirected to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no responsibilitywhatsoever arising in any way from any and all use of or reliance on the information contained in this document.CSA is a private not-for-pro
11、fit company that publishes voluntary standards and related documents. CSA has no power, nor does itundertake, to enforce compliance with the contents of the standards or other documents it publishes.Intellectual property rights and ownershipAs between CSA and the users of this document (whether it b
12、e in printed or electronic form), CSA is the owner, or the authorizedlicensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), andall inventions and trade secrets that may be contained in this document, whether or not such i
13、nventions and trade secrets are protectedby patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this documentmay violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or others to
14、 seek legalredress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves all intellectualproperty rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of paten
15、t rights. CSA shall not be heldresponsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity ofany such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CS
16、A for informational and non-commercial use only. The user of this document is authorized to doonly the following:If this document is in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document.Limited copies of
17、 this document in print or paper form may be distributed only to persons who are authorized by CSA to have suchcopies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Notice from the a
18、ttached standard;.sell this document without authorization from CSA; or.make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document ormake any copies of the contents hereof, and if you do make
19、 such copies, you are required to destroy them immediately. Use of thisdocument constitutes your acceptance of the terms and conditions of this Legal Notice.The Canadian Standards Association (CSA), under whose auspices this National Standard has been produced, was chartered in 1919 and accredited b
20、y the Standards Council of Canada to the National Standards system in 1973. It is a not-for-profit, nonstatutory, voluntary membership association engaged in standards development and certification activities. CSA standards reflect a national consensus of producers and users including manufacturers,
21、 consumers, retailers, unions and professional organizations, and governmental agencies. The standards are used widely by industry and commerce and often adopted by municipal, provincial, and federal governments in their regulations, particularly in the fields of health, safety, building and constru
22、ction, and the environment. Individuals, companies, and associations across Canada indicate their support for CSAs standards development by volunteering their time and skills to CSA Committee work and supporting the Associations objectives through sustaining memberships. The more than 7000 committee
23、 volunteers and the 2000 sustaining memberships together form CSAs total membership from which its Directors are chosen. Sustaining memberships represent a major source of income for CSAs standards development activities. The Association offers certification and testing services in support of and as
24、 an extension to its standards development activities. To ensure the integrity of its certification process, the Association regularly and continually audits and inspects products that bear the CSA Mark. In addition to its head office and laboratory complex in Toronto, CSA has regional branch office
25、s in major centres across Canada and inspection and testing agencies in eight countries. Since 1919, the Association has developed the necessary expertise to meet its corporate mission: CSA is an independent service organization whose mission is to provide an open and effective forum for activities
26、facilitating the exchange of goods and services through the use of standards, certification and related services to meet national and international needs.For further information on CSA services, write toCanadian Standards Association5060 Spectrum Way, Suite 100Mississauga, Ontario, L4W 5N6CanadaThe
27、Standards Council of Canada (SCC) is thecoordinating body of the National StandardsSystem, a coalition of independent, autonomousorganizations working towards the furtherdevelopment and improvement of voluntarystandardization in the national interest.The principal objects of the SCC are to fosterand
28、 promote voluntary standardization as a meansof advancing the national economy, benefiting thehealth, safety, and welfare of the public, assistingand protecting the consumer, facilitating domesticand international trade, and furthering internationalcooperation in the field of standards.A National St
29、andard of Canada (NSC) is a standardprepared or reviewed by an accredited Standards Development Organization (SDO) and approved by the SCC according to the requirements of CAN-P-2. Approval does not refer to the technical content of the standard; this remains the continuing responsibility of the SDO
30、. An NSC reflects a consensus of a number of capable individuals whose collective interests provide, to the greatest practicable extent, a balance of representation of general interests, producers, regulators, users (including consumers), and others with relevant interests, as may be appropriate to
31、the subject in hand. It normally is a standard which is capable of making a significant and timely contribution to the national interest.Those who have a need to apply standards areencouraged to use NSCs. These standards are subjectto periodic review. Users of NSCs are cautionedto obtain the latest
32、edition from the SDO which publishes the standard.The responsibility for approving standards as National Standards of Canada rests with theStandards Council of Canada270 Albert Street, Suite 200Ottawa, Ontario, K1P 6N7CanadaCette Norme nationale du Canada est offerte en anglais et en franais.Althoug
33、h the intended primary application of this Standard is stated in its Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.Registered trade-mark of Canadian Standards AssociationApproved byStandards Council of CanadaNation
34、al Standard of CanadaPublished in February 2007 by Canadian Standards AssociationA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at www.ShopCSA.caCAN/CSA-ISO 14025:07Environmental labels a
35、nd declarations Type III environmental declarations Principles and proceduresRegistered trade-mark of Canadian Standards AssociationReviewed byPrepared byInternational Organization for StandardizationCAN/CSA-ISO 14025:07Environmental labels and declarations Type IIIenvironmental declarations Princip
36、les and proceduresFebruary 2007 Canadian Standards Association CSA/3CAN/CSA-ISO 14025:07Environmental labels and declarations Type III environmental declarations Principles and proceduresCSA PrefaceThis is the first edition of CAN/CSA-ISO 14025, Environmental labels and declarations Type III environ
37、mental declarations Principles and procedures, which is an adoption without modification of the identically titled ISO (International Organization for Standardization) Standard 14025 (first edition, 2006-07-01). This Standard replaces CAN/CSA-ISO/TR 14025-01, Environmental labels and declarations Ty
38、pe III environmental declarations (adopted ISO/TR 14025:2000).The ISO 14000 family of Standards was developed by environmental experts from around the world, under the auspices of the International Organization for Standardization (ISO) Technical Committee 207.This Standard was reviewed for Canadian
39、 adoption by the CSA Technical Committee on Environmental Labelling, under the jurisdiction of the Strategic Steering Committee on Business Management and Sustainability, and has been formally approved by the Technical Committee. This Standard has been approved as a National Standard of Canada by th
40、e Standards Council of Canada.February 2007 Canadian Standards Association 2007All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission ofthe publisher. ISO material is reprinted with permission. Where the words “this International Standa
41、rd” appear in the text, they should be interpreted as “this National Standard of Canada”.Inquiries regarding this National Standard of Canada should be addressed toCanadian Standards Association5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4000www.csa.caTo
42、purchase CSA Standards and related publications, visit CSAs Online Store at www.ShopCSA.ca or call toll-free 1-800-463-6727 or 416-747-4044.Reference numberISO 14025:2006(E)ISO 2006INTERNATIONAL STANDARD ISO14025First edition2006-07-01Environmental labels and declarations Type III environmental decl
43、arations Principles and procedures Marquages et dclarations environnementaux Dclarations environnementales de Type III Principes et modes opratoires ISO 14025:2006(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or
44、viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability
45、 in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitab
46、le for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO 2006 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any m
47、eans, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail cop
48、yrightiso.org Web www.iso.org ii ISO 2006 All rights reservedCAN/CSA-ISO 14025:07ISO 14025:2006(E) ISO 2006 All rights reserved iiiContents Page Foreword iv Introduction v 1 Scope . 1 2 Normative references . 1 3 Terms and definitions. 2 4 Objectives 4 5 Principles. 4 5.1 Relationship with ISO 14020
49、 4 5.2 Voluntary nature . 4 5.3 Life cycle basis . 4 5.4 Modularity 5 5.5 Involvement of interested parties . 5 5.6 Comparability 5 5.7 Verification 5 5.8 Flexibility . 6 5.9 Transparency 6 6 Programme requirements 6 6.1 General. 6 6.2 Scope of the programme . 6 6.3 Responsibilities of the programme operator. 6 6.4 General programme instructions 7 6.5 Involvement of interested parties . 8 6.6 Procedure for definition of product categories . 8 6.7 Procedure for the development of PCR 8 6.8 Procedure for the applic
