1、 Reference numberISO/IEC 10164-15:2002(E)ISO/IEC 2002Information technology Open Systems Interconnection Systems management: Scheduling function Technologies de linformation Interconnexion de systmes ouverts (OSI) Gestion-systmes: Fonction de programmation National Standard of CanadaCAN/CSA-ISO/IEC
2、10164-15:04(ISO/IEC 10164-15:2002)International Standard ISO/IEC 10164-15:2002 (second edition, 2002-12-15), has been adopted withoutmodification (IDT) as CSA Standard CAN/CSA-ISO/IEC 10164-15:04, which has been approved as a NationalStandard of Canada by the Standards Council of Canada.ISBN 1-55397
3、-251-1 January 2004The Canadian Standards Association, which The Standards Council of Canada is theoperates under the name CSA International coordinating body of the National Standards system, (CSA), under whose auspices this National Standard has a federation of independent, autonomousbeen produced
4、, was chartered in 1919 and accredited organizations working towards the furtherby the Standards Council of Canada to the National development and improvement of voluntaryStandards system in 1973. It is a not-for-profit, standardization in the national interest.nonstatutory, voluntary membership ass
5、ociation The principal objects of the Council are to foster engaged in standards development and certification and promote voluntary standardization as a means activities. of advancing the national economy, benefiting theCSA standards reflect a national consensus of producers health, safety, and wel
6、fare of the public, assisting and users including manufacturers, consumers, and protecting the consumer, facilitating domestic retailers, unions and professional organizations, and and international trade, and furthering internationalgovernmental agencies. The standards are used widely cooperation i
7、n the field of standards.by industry and commerce and often adopted by A National Standard of Canada is a standard whichmunicipal, provincial, and federal governments in their has been approved by the Standards Council ofregulations, particularly in the fields of health, safety, Canada and one which
8、 reflects a reasonablebuilding and construction, and the environment. agreement among the views of a number of capableIndividuals, companies, and associations across Canada individuals whose collective interests provide to theindicate their support for CSAs standards development greatest practicable
9、 extent a balance ofby volunteering their time and skills to CSA Committee representation of producers, users, consumers, andwork and supporting the Associations objectives others with relevant interests, as may be appropriatethrough sustaining memberships. The more than 7000 to the subject in hand.
10、 It normally is a standardcommittee volunteers and the 2000 sustaining which is capable of making a significant and timelymemberships together form CSAs total membership contribution to the national interest.from which its Directors are chosen. Sustaining Approval of a standard as a National Standar
11、d ofmemberships represent a major source of income for Canada indicates that a standard conforms to theCSAs standards development activities. criteria and procedures established by the StandardsThe Association offers certification and testing services Council of Canada. Approval does not refer to th
12、ein support of and as an extension to its standards technical content of the standard; this remains thedevelopment activities. To ensure the integrity of its continuing responsibility of the accreditedcertification process, the Association regularly and standards-development organization.continually
13、 audits and inspects products that bear the Those who have a need to apply standards areCSA Mark. encouraged to use National Standards of CanadaIn addition to its head office and laboratory complex in whenever practicable. These standards are subject Toronto, CSA has regional branch offices in major
14、 to periodic review; therefore, users are cautioned centres across Canada and inspection and testing to obtain the latest edition from the organizationagencies in eight countries. Since 1919, the Association preparing the standard.has developed the necessary expertise to meet its The responsibility
15、for approving National Standards corporate mission: CSA is an independent service of Canada rests with theorganization whose mission is to provide an open and Standards Council of Canadaeffective forum for activities facilitating the exchange of 270 Albert Street, Suite 200goods and services through
16、 the use of standards, Ottawa, Ontario, K1P 6N7certification and related services to meet national and Canadainternational needs.For further information on CSA services, write toCanadian Standards Association5060 Spectrum Way, Suite 100Mississauga, Ontario, L4W 5N6CanadaAlthough the intended primary
17、 application of this Standard is stated in its Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.Registered trade-mark of Canadian Standards AssociationInformation technology Open Systems Interconnection CAN/CSA-ISO/IE
18、C 10164-15:04 Systems management: Scheduling functionJanuary 2004 CSA/1CAN/CSA-ISO/IEC 10164-15:04Information technology OpenSystems Interconnection Systemsmanagement: Scheduling functionCSA PrefaceStandards development within the Information Technology sector is harmonized with internationalstandar
19、ds development. Through the CSA Technical Committee on Information Technology (TCIT),Canadians serve as the Canadian Advisory Committee (CAC) on ISO/IEC Joint Technical Committee 1 on Information Technology (ISO/IEC JTC1) for the Standards Council of Canada (SCC), the ISO memberbody for Canada and s
20、ponsor of the Canadian National Committee of the IEC. Also, as a member of theInternational Telecommunication Union (ITU), Canada participates in the International Telegraph andTelephone Consultative Committee (ITU-T).This Standard supersedes CAN/CSA-ISO/IEC 10164-15-96 (adoption of ISO/IEC 10164-15
21、:1995).This International Standard was reviewed by the CSA TCIT under the jurisdiction of the StrategicSteering Committee on Information Technology and deemed acceptable for use in Canada. (Acommittee membership list is available on request from the CSA Project Manager.) From time to time,ISO/IEC ma
22、y publish addenda, corrigenda, etc. The CSA TCIT will review these documents for approvaland publication. For a listing, refer to the CSA Information Products catalogue or CSA Info Update orcontact a CSA Sales representative. This Standard has been formally approved, without modification, by the Tec
23、hnical Committee and has been approved as a National Standard of Canada by the StandardsCouncil of CanadaJanuary 2004 Canadian Standards Association 2004All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission ofthe publisher. ISO/IEC mat
24、erial is reprinted with permission. Where the words “this International Standard” appear in thetext, they should be interpreted as “this National Standard of Canada”. Inquiries regarding this National Standard of Canada should be addressed to Canadian Standards Association 5060 Spectrum Way, Suite 1
25、00, Mississauga, Ontario, Canada L4W 5N6 1-800-463-6727 416-747-4044www.csa.caReference numberISO/IEC 10164-15:2002(E)ISO/IEC 2002INTERNATIONAL STANDARD ISO/IEC10164-15Second edition2002-12-15Information technology Open Systems Interconnection Systems management: Scheduling function Technologies de
26、linformation Interconnexion de systmes ouverts (OSI) Gestion-systmes: Fonction de programmation ISO/IEC 10164-15:2002(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the type
27、faces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe S
28、ystems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlike
29、ly event that a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO/IEC 2002 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including
30、photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org ii ISO/IEC 2
31、002 All rights reservedISO/IEC 10164-15:2002(E) ISO/IEC 2002 All rights reserved iiiCONTENTS Page 1 Scope. 1 2 Normative references 1 2.1 Identical Recommendations | International Standards 1 2.2 Paired Recommendations | International Standards equivalent in technical content 2 2.3 Additional refere
32、nces 2 3 Definitions 2 3.1 Basic reference model definitions. 3 3.2 Abstract syntax notation one definitions. 3 3.3 Management framework definitions . 3 3.4 Common management information service definitions 3 3.5 Systems management overview definitions 3 3.6 Management information model definitions
33、. 3 3.7 Additional definitions . 4 4 Abbreviations 4 5 Conventions 4 6 Requirements 4 7 Model 5 7.1 Internal scheduling mechanism. 5 7.2 External scheduling mechanism 5 7.3 Types of scheduling 6 7.4 Relationships between SOs and SMOs . 7 8 Generic definitions . 8 8.1 Management information required
34、for internal scheduling. 8 8.2 Managed objects . 8 8.3 Packages . 13 8.4 Properties of SMOs. 19 8.5 Compliance . 21 8.6 Generic definitions from the object management function. 21 8.7 Generic definitions from the state management function. 21 8.8 Generic definitions from the event report management
35、function. 21 8.9 Generic definitions from the test management function 21 8.10 Generic definitions from the summarization function . 21 9 Service definition . 22 10 Functional units . 22 11 Protocol and abstract syntax . 22 11.1 Managed objects. 22 11.2 Management attributes. 23 11.3 Management acti
36、ons 23 11.4 Management notifications. 23 12 Relationships with other functions . 23 13 Conformance 23 13.1 Static conformance 24 13.2 Dynamic conformance . 24 13.3 Management implementation conformance statement requirements 24 Annex A Definition of management information. 24 A.1 Object class defini
37、tions 24 A.1.1 Scheduler object definition . 24 A.1.2 Daily scheduler object definition 25 A.1.3 Weekly scheduler object definition. 25 A.1.4 Monthly scheduler object definition . 25 A.1.5 Periodic scheduler object definition 25 ISO/IEC 10164-15:2002(E) iv ISO/IEC 2002 All rights reservedPage A.1.6
38、Daily operation scheduler object definition 25 A.1.7 Weekly operation scheduler object definition. 25 A.1.8 Monthly operation scheduler object definition . 25 A.1.9 Periodic operation scheduler object definition 26 A.1.10 Operation result record object definition 26 A.1.11 multischeduler object defi
39、nition 26 A.1.12 typeOfDayController 27 A.2 Name bindings . 27 A.2.1 Scheduler name binding 27 A.2.2 type of day controller name-binding . 28 A.3 Packages . 28 A.3.1 Multiple daily scheduling package 28 A.3.2 Multiple monthly scheduling package 28 A.3.3 Multiple weekly scheduling package 28 A.3.4 Pe
40、riodic scheduling package. 29 A.3.5 Resynchronize mode package . 29 A.3.6 Scheduled managed objects package 29 A.3.7 Scheduler object package 29 A.3.8 Operations scheduling package. 29 A.3.9 Operation notification package . 29 A.4 Attributes 29 A.4.1 External scheduler name attribute. 30 A.4.2 On du
41、ty attribute . 30 A.4.3 Resynchronize mode attribute. 30 A.4.4 Scheduled managed objects attribute 30 A.4.5 Scheduler ID attribute . 31 A.4.6 scheduling data attribute . 31 A.4.7 Sequence of days attribute 31 A.4.8 Sequence of months attribute 31 A.4.9 Sequence of weeks attribute 31 A.4.10 Time peri
42、od attribute. 31 A.4.11 Operation specifications attribute 31 A.4.12 Operation result attribute. 32 A.4.13 type of day controller instance attribute 32 A.4.14 type of day controller id attribute 32 A.4.15 week day translation list attribute 32 A.4.16 Behaviour for current TypeOfDay initial value 32
43、A.5 Notifications 32 A.5.1 Operation result notification . 32 A.6 ASN.1 definitions . 32 Annex B Exemple of scheduling Data values. 36 B.1 Example 1: Shows several index values use . 36 B.1.1 Interval solution 36 B.1.2 Trigger solution. 36 B.2 Example 2: Shows typeOfDay use 37 B.2.1 Interval solutio
44、n 37 B.2.2 Trigger solution. 38 B.3 Example 3: Shows overlapping intervals, implicit repetition (months periodicity) and mixed scheduler types 38 Annex C MCS proforma. 40 Annex D PICS proforma 40 Annex E MOCS proforma 40 Annex F MIDS proforma . 40 Annex G MRCS proforma 40 ISO/IEC 10164-15:2002(E) IS
45、O/IEC 2002 All rights reserved vForeword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of Intern
46、ational Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison
47、with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technica
48、l committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is draw
49、n to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. ISO/IEC 10164-15 was prepared by ITU-T (as ITU-T Rec. X.746) and was adopted, under a special “fast-track procedure” by Joint Technical Committee ISO/IEC JTC 1, in parallel with its approval by national bodies of ISO and IEC. The identical text is published as ITU-T Rec. X.746. This second edition cancel
