1、Amendment 1 :I997 to National Standard of Canada (Reaffirmed 2002) I CAN/CSA-ISO/IEC 101 64-4-95 Amendment 1:1995 to International Standard ISOIIEX 10164-4:1992 has been adopted without modification as Amendment 1:1997 to CANICSA-ISOIIEC 10164-4-95. This Amendment was reviewed by the CSA Technical C
2、ommittee on Information Technology (TCIT) under the jurisdiction of the Strategic Steering Committee on Information Technology and deemed acceptable for use in Canada. October 1997 Information technology - Open Systems Interconnection - Systems Management: Alarm reporting function AMENDMENT 1 : Impl
3、ementation conformance statement proformas Technologies de /information - interconnexion de systemes ouverts (09) - Gestion-systemes: function de rapport dalarme AMENDEMENT 1: Proformes de declaration de conformite de mise en euvre Reference number ISO/IEC 10164-4:1992/Amd.l:1995(E) ISO/IEC 10164-4:
4、 1992/Amd.I: 1995(E) Foreword IS0 (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of IS0 or IEC participate in the development of International Sta
5、ndards through technical committees established by the respective organization to deal with particular fieIds of technical activity. IS0 and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with IS0 an
6、d IEC, also take part in the work. In the field of information technology, IS0 and IEC have established a joint technical committee, ISO/IEC JTC I. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Sta
7、ndard requires approval by at least 75 9% of the national bodies casting a vote. Amendment 1 to International Standard ISO/IEC 10164-4: 1992 was prepared by Joint Technical Committee ISOLIEC JTC 1, Information technology, Subcommittee SC 21, Open systems interconnection, datu management and open dis
8、tributed processing, in collaboration with ITU-T. The identical text is published as ITU-T Rec. X.733/Amd. 1. 0 ISO/IEC1995 All rights reserved. Unless otherwise specified, no part of this publication may be repro- duced or utilized in any form or by any means, electronic or mechanical, including ph
9、oto- copying and microfilm, without permission in writing from the publisher. ISOIIEC Copyright Office Case Postale 56 CH-1211 Genkve 20 Switzerland 11 Information technology Open Systems Interconnection Systems Management: Alarm reporting functionTechnical Corrigendum 1:2013 (IDT) toAmendment 1:199
10、7 toNational Standard of CanadaCAN/CSA-ISO/IEC 10164-4-95(ISO/IEC 10164-4:1992, IDT)NOT FOR RESALE. / PUBLICATION NON DESTINE LA REVENTE.Standards Update ServiceTechnical Corrigendum 1:2013 to Amendment 1:1997 toCAN/CSA-ISO/IEC 10164-4-95January 2013Title: Information technology Open Systems Interco
11、nnection Systems Management: Alarm reporting functionPagination: 2 pagesTo register for e-mail notification about any updates to this publicationgo to shop.csa.caclick on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2410836.If you require assistance
12、, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legal to find out how we protect your personal information.INTERNATIONAL STANDARD ISO/IEC 10164-4:1992/Amd.1:1995 m Published 1996-12-15 TECHNICAL CORRIGENDUM 1 - INTERNATIONAL ORGANIZATIO
13、N FOR STANDARDIZATION. MEWWHAPOjIHIVl OPTAHM3ALWI IlO CTAHJIPTkBAUMM . ORGANISATION INTERNATIONALE DE NORMALISATION INTERNATIONAL ELECTROTECHNICAL COMMISSION l MEmllYHAPORHA5l 3flEKTPOTEXHMYECK KOMMCCWI . COMMISSION ELECTROTECHNIOUE INTERNATIONALE Information technology - Open Systems Interconnectio
14、n - Systems Management: Alarm reporting function AMENDMENT 1: Implementation conformance statement proformas TECHNICAL CORRIGENDUM 1 Technologies de Iinforma tion - lnterconnexion de systemes ouverts (03) - Gestion-systemes: Fonction de rapport dalarme AMENDEMENT I: Proformes de declaration de confo
15、rmite de mise en ceuvre RECTIFICATIF TECHNIQUE 7 Technical Corrigendum 1 to International Standard lSO/IEC 10164-4:1992/Amd.l :I 995 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 21, Open systems intercon- nection, data management and open distribut
16、ed processing. . ICS 35.100.70 Ref. No. ISO/IEC 10164-4:1992/Amd.1:1995/Cor.1:1996(E) Descriptors: data processing, information interchange, network interconnection, open systems interconnection, application layer, systems management, management. 0 ISO/IEC 1996 Technical Corrigendum 1:2013 to Amendm
17、ent 1:1999 to CAN/CSA-ISO/IEC 10164-4-95ISO/IEC 10164-4 : 1992/Amd.l : 1995Kor.l : 1996 (E) INTERNATIONAL STANDARD ITU-T RECOMMENDATION INFORMlATION TECHNOLOGY - OPEN SYSTEMS INTERCONNECTION - SYSTEMS MANAGEMENT: ALARM REPORTING FUNCTION AMENDMENT 1 Implementation conformance statement proformas TEC
18、HNICAL CORRIGENDUM 1 1) Annex A In Table A.6 - “PICS Support Summary”, first row referencing “CCITT Rec. X.730 I ISO/IEC 10164-1, Annex E, SM Application Context” change the statusfiom “m” to “0” and add the following note for the corresponding row of this table: “NOTE - The supplier of implementati
19、on shall indicate the application contexts supported.” 2) Subclause A.1.3 Add the following sentence afier the line “- Not applicable or out of scope”, immediately before “NOTES”: “The value of m in the Status column for the receiving of parameters, of tables of type MCS in Annex A indicates that th
20、ere is a minimum requirement for the implementation to be able to receive the parameter. The Additional information column shall be used to state whether the implementation provides support for more than the minimum requirement.” ITU-T Rec. X.733 (1992)/Amd.l (1995)Kor.l (1996 E) Technical Corrigend
21、um 1:2013 to Amendment 1:1999 to CAN/CSA-ISO/IEC 10164-4-95Blank pageCopyright NoticeThis Amendment to the International Standard contains information copyright protected by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). Except as pe
22、rmitted under the laws of Canada, no extract of this Amendment to the International Standard may be reproduced, stored in any retrieval system, or transmitted in any form or by any means, electronic, photocopying, recording, or otherwise, without prior permission from the Standards Council of Canada
23、 (SCC). Requests for permission to reproduce this Amendment to the International Standard or parts thereof should be addressed to Manager, Technical Document Centre Standards Council of Canada 270 Albert Street, Suite 200 Ottawa, Ontario K1P 6N7 The Canadian adoption of this Amendment to the Interna
24、tional Standard contains information copyright protected by CSA Group. All rights reserved. No part of this adopted Amendment may be reproduced in any form whatsoever without the prior permission of the publisher. ISO/IEC material is reprinted with permission. Requests for permission to reproduce th
25、is adopted Amendment or parts thereof should be addressed to Manager, Sales CSA Group 5060 Spectrum Way, Suite 100 Mississauga, Ontario L4W 5N6Copyright violators will be prosecuted to the full extent of the law.PRINTED IN CANADAIMPRIMEAU CANADA100%CSA Group prints its publications on Rolland Enviro
26、100, which contains 100% recycled post-consumer fibre, is EcoLogo and Processed Chlorine Free certified, and was manufactured using biogas energy.0 ISO/IEC ISO/IEC 10164-4: 199aAmd.l: 1995(E) Introduction This amendment includes tables, which document the mandatory and optional management informatio
27、n specific to the Alarm Reporting Function. This amendment will be used by Profile specifiers, for example those developing International Standardized Profiles (ISPs), to specify an explicit subset of capability, which will afford interoperability between implementations. The table ah0 include a col
28、umn for equipment vendors to state the capability of their products in terms of the Profiles or base specification. The table structures comply with the Guidelines for Implementation Conformance Statement Proformas specified in ITU-T Recommendation X.724 I ISO/IEC 101 65-6. . 111 ISO/IEC 10164-4 : 1
29、99ZAmd.l : 1995 (E) INTERNATIONAL STANDARD ITU-T RECOMMENDATION INFORMATION TECHNOLOGY - OPEN SYSTEMS INTERCONNECTION - SYSTEMS MANAGEMENT: ALARM REPORTING FUNCTION AMENDMENT 1 (to ITU-T Rec. X.733 I ISODEC 10164-4) Implementation conformance statement proformas 3) 4) 5) Add the following footnote t
30、o thefirst list item in 2.1: “1 As amended by ITU-T Rec. X.701/Cor.2 I ISOAEC 10040/Cor.2”. Add the following reference to 2. I: “- ITU-T Recornmendation X.724 (1993) I ISO/IEC 10165-6: 1994, Information technology - Open Systems Interconnection - Structure of management information: Requirements an
31、d guidelines for implementation conformance statement proformas associated with OS1 management.” Add the following references to 2.2: “- CCITT Recommendation X.291 (19921, OS1 conformance testing methodology and framework for protocol Recommendations for CClTT applications - Abstract test suife spec
32、ification. ISO/IEC 9646-2: 199 1, Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 2: Abstract left suite specification. ITU-T Recommendation X.2963), OSZ conformance testing methodology and framework for protocol Recommendations for ITU- T
33、 applications - Imp1 emen tat ion conformance statements. - ISO/IEC 9646-73), Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation conformance statements.” And then add the following footnote: Presently at the stage of draft.
34、3, Apply the following changes to 3.4: Delete items c) and d). Relabel item e) as c) and insert the following new items: “e) managed object conformance statement (MOCS); f Relabel items h) through j) as j) through 1) and insert the following new items: “h) MICS proforma; i) MOCS proforma;” managemen
35、t information conformance statement (MICS);” Apply the following change to 3.6: Replace “system conformance statement” with the following: “a) PICS proforma; b) protocol implementation conformance statement; c) system conformance statement.” Renumber 3.7 as 3.8 and insert the following new subclause
36、: ITU-T Rec. X.733 (1992)/Amd.l(1995 E) I ISODEC 10164-4 : 1992/Amd.l : 1995 (E) 3.7 “Implementation conformance statement proforma definitions This Recommendation I International Standard makes use of the following terms defined in ITU-T Rec. X.724 I ISO/IEC 101 65-6: a) Managed Relationship Confor
37、mance Statement (MRCS); b) Management Conformance Summary (MCS); c) d) MCS proforma; e) MRCS proforma.” Management Information Definition Statement (MIDS) proforma; 7) Add the following abbreviations 10 clause 4: “ICs Implementation Conformance Statement MCS Management Conformance Summary MICS Manag
38、ement In formati on Conformance Statement MIDS Management Information Definition Statement MOCS Managed Object Conformance Statement MRCS PICS Protocol Implementation Conformance Statement” Managed Re1 at io nshi p Conform an ce Statement Replace clause 13 with the following: Lc13 Conformance Implem
39、entations claiming to conform to this Recommendation I International Standard shall comply with the conformance requirements as defined in the following subclauses. 13.1 Static conformance The implementation shall conform to the requirements of this Recornmendation I International Standard in the ma
40、nager role, the agent role, or both roles. A claim of conformance to at least one role shall be made in Table A. 1. If a claim of conformance is made for support in the manager role, the implementation shall support at least one of the notifications or at least one of the management operations speci
41、fied in this Recommendation I International Standard. The conformance requirements in the manager role for those management operations and notifications are identified in Table A.3 and further tables referenced by Annex A. If a claim of conformance is made for support in the agent role, the implemen
42、tation shall support at least one of the notifications specified in this Recommendation I International Standard. The conformance requirements in the agent role are identified in Table A.4 and further tables referenced by Annex A. The implementation shall support the transfer syntax derived from the
43、 encoding rules specified in CCITT Rec. X.209 I ISO/IEC 8825 named joint-iso-ccitt asnl(1) basicEncoding( I) for the abstract data types referenced by the definitions for which support is claimed. NOTE - Prior to the pubhcation of this amendment, this Recornmendation I International Standard identif
44、ied general and dependent conformance classes. A claim of conformance similar to general conformance class can be made by stating support in the manager role, the agent role, or both roles, for the alarm reporting functional unit in Table A.2. A claim of conformance similar to dependent conformance
45、class can be made by stating support for at least one of the items in Tables 8.3 or A.4. 13.2 Dynamic conformance Implementations claiming to conform to this Recommendation 1 International Standard shall support the elements of- procedure and definitions of semantics corresponding to the definitions
46、 for which support is claimed. 13.3 Management implementation conformance statement requirements Any MCS proforma, MICS proforma, and MOCS proforma which conforms to this Recommendation I International Standard shall be technically identical to the proformas specified in Annexes A, B and C preservin
47、g table numbering and the index numbers of items, and differing only in pagination and page headers. 2 ITU-T Rec. X.733 (1992)/Amd.l (1995 E) ISOnEC 10164-4 : 199UAmd.l : 1995 (E) The supplier of an implementation which is claimed to conform to this Recommendation 1 International Standard shall comp
48、lete a copy of the Management Conformance Summary (MCS) provided in Annex A as part of the conformance requirements together with any other ICs proformas referenced as applicable from that MCS. An ICs which conforms to this Recommendation I International Standard shall: - describe an implementation
49、which conforms to this Recommendation I International Standard; - have been completed in accordance with the instructions for completion given in ITU-T Rec. X.724 I ISO/IEC 10165-6; - include the information necessary to uniquely identify both the supplier and the implementation. Claims of conformance to the management information defined in this Recommendation I International Standard in managed object classes defined elsewhere shall include the requirements of the MIDS proforma in the M
