1、Amendment 1 :I 997 to National Standard of Canada (Reaffirmed 2002) 1 CAN/CSA-ISO/IEC 101 64-5-95 Amendment 1: 1995 to International Standard ISOlIEC 10164-51993 has been adopted without modification as Amendment 1:1997 to CANICSA-ISOIIEC 10164-5-95. This Amendment was reviewed by the CSA Technical
2、Committee on Information Technology (TCIT) under the jurisdiction of the Strategic Steering Committee on Information Technology and deemed acceptable for use in Canada. October 1997 Information technology - Open Systems Interconnection - Systems Management: Event Report Management Function AMENDMENT
3、 I : Implementation conformance statement proformas Technologies de /information - lnterconnexion de s ystgrnes ouverts (OSl) - Gestion-systemes: Fonction de gestion de rapport evenemen tiel AMENDEMENT 7: Proformes de d6ciaration de conformite de mise en csuvre Reference number SO/IEC 10164-5:1993/A
4、md.1:1995(E) ISOnEC 10164-5: 1993/Amd.l: 1995(E) Foreword IS0 (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of IS0 or IEC participate in the deve
5、lopment of International Standards through technical. committees established by the respective organization to deal with particular fields of technical activity. IS0 and IEC technical committees coilaborate in fields of mutual interest. Other international organizations, governmental and non-governm
6、ental, in liaison with IS0 and IEC, also take part in the work. In the field of information technology, IS0 and IEC have established a joint technical committee, ISO/IEC JTC I Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publica
7、tion as an International Standard requires approval by at least 75 96 of the national bodies casting a vote. Amendment 1 to International Standard ISOAEC 10164-5: 1993 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 21, Open systems interconnection, d
8、ata management and open distributedprocessing, in collaboration with ITU-T. The identical text is published as ITU-T Rec. X.734/Amd. 1. 0 ISOJEC 1995 All rights reserved. Unless otherwise specified, no part of this publication may be repro- duced or utilized in any form or by any means, electronic o
9、r mechanica1, including photo- copying and microfilm, without permission in writing from the publisher. ISOflEC Copyright Office Case Postale 56 CH-1211 Genkve 20 Switzerland 11 Information technology Open Systems Interconnection Systems Management: Event Report Management FunctionTechnical Corrigen
10、dum 1:2013 (IDT) toAmendment 1:1997 toNational Standard of CanadaCAN/CSA-ISO/IEC 10164-5-95(ISO/IEC 10164-5:1993, IDT)NOT FOR RESALE. / PUBLICATION NON DESTINE LA REVENTE.Standards Update ServiceTechnical Corrigendum 1:2013 to Amendment 1:1997 toCAN/CSA-ISO/IEC 10164-5-95January 2013Title: Informati
11、on technology Open Systems Interconnection Systems Management: Event Report Management FunctionPagination: 2 pagesTo register for e-mail notification about any updates to this publicationgo to shop.csa.caclick on CSA Update ServiceThe List ID that you will need to register for updates to this public
12、ation is 2410837.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legal to find out how we protect your personal information.INTERNATIONAL STANDARD ISO/IEC 10164,5:1993/Amd.1:1995 TECHNICAL CORRIGENDUM 1 Publishe
13、d 1996-12-15 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEKJIYHAPOflH OPl-AHl43ALWl IlO Cl-AHPTM3AMM l ORGANISATION INTERNATIONALE DE NORMALISATION INTERNATIONAL ELECTROTECHNICAL COMMISSION . MEIKjIWHAPOJJHAfl 3JlEKTPOTEXHWECKAfl KOMLlCCMR l COMMISSION LECTROTECHNIOUE INTERNATIONALE Informatio
14、n technology - Open Systems Interconnection - Systems Management: Event Report Management Function AMENDMENT 1: Implementation conformance statement proformas TECHNICAL CORRIGENDUM I Technologies de Sin formation - Interconnexion de systemes ouverts (03) - Gestion-systemes: Fonction de ges tion de r
15、apport evenemen tiel AMENDEMENT I: Proformes de declaration de conformite de mise en ceuvre RECTIFICATIF TECHNIQUE I Technical Corrigendum I to International Standard lSO/IEC 10164-5:1993/Amd.l :I 995 was prepared by Joint Technical Committee lSO/IEC JTC 1, Information technology, Subcommittee SC 21
16、, Open systems intercon- nection, data management and open distributed processing. ICS 35.100.70 Ref. No. ISO/IEC 101645:1993/Amd.1:1995/Cor.l:1996(E) Descriptors: data processing, information interchange, network interconnection, open systems interconnection, application layer, systems management,
17、management. 0 ISO/IEC 1996 Printed in Switzerland Technical Corrigendum 1:2013 to Amendment 1:1999 to CAN/CSA-ISO/IEC 10164-5-95ISO/IEC 10164-5 : 1993/Amd.l : 1995Kor.l : 1996 (E) INTERNATIONAL STANDARD ITU-T RECOMMENDATION INFORMATION TECHNOLOGY - OPEN SYSTEMS INTERCONNECTION - SYSTEMS MANAGEMENT:
18、EVENT REPORT MANAGEMENT FUNCTION AMENDMENT 1 Implementation conformance statement proformas TECHNICAL CORRIGENDUM 1 1) Annex A In Table A.6 - “PICS Support Summary”, first row referencing “CCITT Rec. X.730 I ISO/IEC 10164-l) Annex E, SM application context”, change the statusjkom “m” to “0” and add
19、the following note for the corresponding row of this table: “NOTE - The supplier of implementation shall indicate the application contexts supported.” 2) Subclause A.l.3 Add the following sentence after the line “- Not applicable or out of scope”, immediately before “NOTES”: “The value of m in the S
20、tatus column for the receiving of parameters, of tables of type MCS in Annex A indicates that there is a minimum requirement for the implementation to be able to receive the parameter. The Additional information column shall be used to state whether the implementation provides support for more than
21、the minimum requirement.” ITU-T Rec. X.734 (1992)/AmdJ (1995)Kor.l (1996 E) Technical Corrigendum 1:2013 to Amendment 1:1999 to CAN/CSA-ISO/IEC 10164-5-95Blank pageCopyright NoticeThis Amendment to the International Standard contains information copyright protected by the International Organization
22、for Standardization (ISO) and the International Electrotechnical Commission (IEC). Except as permitted under the laws of Canada, no extract of this Amendment to the International Standard may be reproduced, stored in any retrieval system, or transmitted in any form or by any means, electronic, photo
23、copying, recording, or otherwise, without prior permission from the Standards Council of Canada (SCC). Requests for permission to reproduce this Amendment to the International Standard or parts thereof should be addressed to Manager, Technical Document Centre Standards Council of Canada 270 Albert S
24、treet, Suite 200 Ottawa, Ontario K1P 6N7 The Canadian adoption of this Amendment to the International Standard contains information copyright protected by CSA Group. All rights reserved. No part of this adopted Amendment may be reproduced in any form whatsoever without the prior permission of the pu
25、blisher. ISO/IEC material is reprinted with permission. Requests for permission to reproduce this adopted Amendment or parts thereof should be addressed to Manager, Sales CSA Group 5060 Spectrum Way, Suite 100 Mississauga, Ontario L4W 5N6Copyright violators will be prosecuted to the full extent of t
26、he law.PRINTED IN CANADAIMPRIMEAU CANADA100%CSA Group prints its publications on Rolland Enviro100, which contains 100% recycled post-consumer fibre, is EcoLogo and Processed Chlorine Free certified, and was manufactured using biogas energy.0 ISOAEC IS ODEC 10164-5: 1993/Amd.l: 1995(E) Introduction
27、This amendment includes tables, which document the mandatory and optional management information specific to the Event Reporting Management Function. This amendment will be used by Profile specifiers, for example those deveIoping International Standardized Profiles (ISPs), to specify and explicit su
28、bset of capability, which will afford interoperability between implementations. The tables also include a column for equipment vendors to state the capability of their products in terms of the Profiles or base specification. The table structures comply with the Guidelines for Implementation Conforma
29、nce Statement Proformas specified in ITU-T Recommendation X.724 I ISOEC 101 65-6. . 111 ISOnEC 10164-5 : 1993/Amd.l: 1995 (E) INTERNATIONAL STANDARD ITU-T RECOMMENDATION 3) 4) 5) “3.7 INFORMATION TECHNOLOGY - OPEN SYSTEMS INTERCONNECTION - SYSTEMS MANAGEmNT: EVENT REPORT MANAGEMENT FUNCTION AMENDMEN
30、T 1 (to ITU-T Rec. X.734 I ISODEC 10164-5) Implementation conformance statement proformas Add the following footnote to thefirst list item in 2.i: I1) as amended by ITU-T Rec. X.7QUCor.2 I ISO/IEC 10040Kor.2” Add the followicg reference to 2.1: “- ITU-T Recommendation X.724 (1993) I ISO/IEC 10165-6:
31、 1994, Information technology - Open Systems Interconnection - Structure of management information: Requirements and guidelines for implementation conformance statement profomas associated with OS1 management. ” Add the following references to 2.2: “- CCITT Recommendation X.29 1 (1 992), OS1 conform
32、ance testing methodology and framework for protocol Recommendations for CUTT applications - Absrract test suite specification. ISO/IEC 9646-2: 1991, Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 2: Abstract test suite specification. ITU-
33、T Recornmendation X.29fi2), OS1 conformance testing methodology and framework for protocol Recommendations for ITU- T applications - Implementation conformance statements. ISOAEC 9646-7 1, Information technology - Open Systems Interconnection - Conformance testing methodology and framework - PaJ-t 7
34、: Implementation co$ormance statements.” And rhen add the following footnote: Presently at the stage of draft. - 2, Apply the following changes to 3.4: Replace “dependent conformance” with “managed object conformance statement (MOCS)”. Replace “general conformance” with “management information confo
35、rmance statement (MICS)”. Relabel iternsf3 through h) as h) through j) and insert the following cew items: f) MICS proforma: g) MOCS proforma; Apply the following changes to 3.6: Replace “term” with “terms”. Replace “system conformance statement” with the following: “a) PICS proforma; b) protocol im
36、plementation conformance statement; c) system conformance statement.” Renumber 3.7 as 3.8 and insert the following new subclause: Implementation conformance statement proforma definitions This Recommendation I International Standard makes use of the following terms defined in ITU-T Rec. X.724 I ISO/
37、IEC 10165-6: a) b) Management Conformance Summary (MCS); c) MCS proforma; d) MRCS proforma.” Managed Relationship Conformance Statement (MRCS); ITU-T Rec. X.734 (1992)/Amd.l(1995 E) 1 ISO/lEC 10164-5 : 1993/Amd.l : 1995 (E) 7) 9) “13 Add the following abbreviations to clause 4: “ICs Implementation C
38、onformance Statement MCS Management Conformance Summary MICS Management Information Conformance Statement MOCS Managed Object Conformance Statement MRCS Managed Relationship Conformance Statement PICS Protocol Implementation Conformance Statement” Apply the foilowing changes to 9.2: In the third par
39、agraph, replace “annex E” with “Annex F”. Replace clause 13 with the following: Conformance Implementations claiming to conform ta this Recornmendation I International Standard shall compIy with the conformance requirements as defined in the following subclauses. 13.1 Static conformance The implemen
40、tation shall conform to the requirements of this Recommendation I International Standard in the manager role, the agent role, or both roles. A claim of conformance to at least one role shall be made in Table A. 1. If a claim of conformance is made for support in the manager role, the implementation
41、shall support at least one management operation or notification of the event forwarding discriminator managed object specified by this Recommendation I International Standard. The conformance requirements in the manager role for those management operations and notifications are identified in Table A
42、.3 and further tables referenced by Annex A. If a claim of conformance is made for support in the agent role, the implementation shall support one or more instances of the event forwarding discriminator managed object class identified in Table A.4. The implementation shall support the transfer synta
43、x derived from the encoding rules specified in CCITT Rec. X.209 I ISO/IEC 8825 named joint-iso-ccitt asnl( 1) basicEncoding(1) for the abstract data types referenced by the definitions for which support is claimed. NOTE - Prior to the publication of this amendment, this Recommendation I Internationa
44、l Standard identified general and dependent conformance classes. A claim of conformance similar to general conformance class can be made by stating support in the manager role, the agent role, or both roles, for the event report management functional unit in Table A.2. A claim of conformance similar
45、 to dependent conformance class can be made by stating support for at least one of the items in Tables A.3 or A.4. 13.2 Dynamic conformance Implementations claiming to conform to this Recommendation I International Standard shall support the elements of procedure and definitions of semantics corresp
46、onding to the definitions for which support is claimed. 13.3 Any MCS proforma, MICS proforma, MOCS proforma, and MRCS proforma which conforms to this Recommendation I International Standard shall be technically identical to the proformas specified in Annexes A, 13, C and D preserving table numbering
47、 and the index numbers of items, and differing only in pagination and page headers. Management implementation conformance statement requirements The supplier of an implementation which is claimed to conform to this Recommendation i International Standard shall complete a copy of the Management Confo
48、rmance Summary (MCS) provided in Annex A as part of the conformance requirements together with any other ICs proformas referenced as applicable from that MCS. An ICs which conforms to this Recommendation I International Standard shall: - describe an implementation which conforms to this Recommendati
49、on I International Standard; - have been completed in accordance with the instructions for completion given in ITU-T Rec. X.724 I ISOlTEC 10165-6; - include the information necessary to uniquely identify both the supplier and the implementation.” 2 ITU-T Rec. X.734 (1992)/Arnd.l (1995 E) ISO/IEC 10164-5 : 1993/Amd.l : 1995 (E) Index First block of columns Second block of columns A.1 Etc. A.l.l Relabel Annexes A through C us E through G and insert the following annexes: Annex A MCS proforma3) (This annex forms an integral part of this Recommendation I International Stan
