1、Reference numberISO/IEC 10175-3:2000(E)ISO/IEC 2000Information technology Text and officesystems Document Printing Application(DPA) Part 3:Management abstract service definitionsand proceduresTechnologies de linformation Bureautique Application impressionde documents (DPA) Partie 3: Dfinitions et pr
2、ocdures de service abstrait de gestionNational Standard of CanadaCAN/CSA-ISO/IEC 10175-3:02(ISO/IEC 10175-3:2000)International Standard ISO/IEC 10175-3:2000 (first edition, 2000-12-15) has been adopted withoutmodification (IDT) as CSA Standard CAN/CSA-ISO/IEC 10175-3:02, which has been approved as a
3、 NationalStandard of Canada by the Standards Council of Canada.ISBN 1-55324-927-5 December 2002The Canadian Standards Association (CSA), The Standards Council of Canada is theunder whose auspices this National Standard has been coordinating body of the National Standards system, produced, was charte
4、red in 1919 and accredited by a federation of independent, autonomousthe Standards Council of Canada to the National organizations working towards the furtherStandards system in 1973. It is a not-for-profit, development and improvement of voluntarynonstatutory, voluntary membership association stand
5、ardization in the national interest.engaged in standards development and certification The principal objects of the Council are to foster activities. and promote voluntary standardization as a means CSA standards reflect a national consensus of of advancing the national economy, benefiting theproduc
6、ers and users including manufacturers, health, safety, and welfare of the public, assisting consumers, retailers, unions and professional and protecting the consumer, facilitating domestic organizations, and governmental agencies. The and international trade, and furthering internationalstandards ar
7、e used widely by industry and commerce cooperation in the field of standards.and often adopted by municipal, provincial, and A National Standard of Canada is a standard whichfederal governments in their regulations, particularly has been approved by the Standards Council ofin the fields of health, s
8、afety, building and Canada and one which reflects a reasonableconstruction, and the environment. agreement among the views of a number of capableIndividuals, companies, and associations across individuals whose collective interests provide to theCanada indicate their support for CSAs standards great
9、est practicable extent a balance ofdevelopment by volunteering their time and skills to representation of producers, users, consumers, andCSA Committee work and supporting the Associations others with relevant interests, as may be appropriateobjectives through sustaining memberships. The to the subj
10、ect in hand. It normally is a standardmore than 7000 committee volunteers and the 2000 which is capable of making a significant and timelysustaining memberships together form CSAs total contribution to the national interest.membership from which its Directors are chosen. Approval of a standard as a
11、National Standard ofSustaining memberships represent a major source of Canada indicates that a standard conforms to theincome for CSAs standards development activities. criteria and procedures established by the StandardsThe Association offers certification and testing Council of Canada. Approval do
12、es not refer to theservices in support of and as an extension to its technical content of the standard; this remains thestandards development activities. To ensure the continuing responsibility of the accreditedintegrity of its certification process, the Association standards-development organizatio
13、n.regularly and continually audits and inspects products Those who have a need to apply standards arethat bear the CSA Mark. encouraged to use National Standards of CanadaIn addition to its head office and laboratory complex whenever practicable. These standards are subject in Toronto, CSA has regio
14、nal branch offices in major to periodic review; therefore, users are cautioned centres across Canada and inspection and testing to obtain the latest edition from the organizationagencies in eight countries. Since 1919, the preparing the standard.Association has developed the necessary expertise to T
15、he responsibility for approving National Standards meet its corporate mission: CSA is an independent of Canada rests with theservice organization whose mission is to provide an Standards Council of Canadaopen and effective forum for activities facilitating the 270 Albert Street, Suite 200exchange of
16、 goods and services through the use of Ottawa, Ontario, K1P 6N7standards, certification and related services to meet Canadanational and international needs.For further information on CSA services, write toCanadian Standards Association5060 Spectrum Way, Suite 100Mississauga, Ontario, L4W 5N6CanadaAl
17、though the intended primary application of this Standard is stated in its Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.Registered trade-mark of Canadian Standards AssociationCAN/CSA-ISO/IEC 10175-3:02 (DPA) Part 3
18、: Management abstract service definitions and proceduresInformation technology Text and office systems Document Printing ApplicationDecember 2002 Canadian Standards Association CSA/1CAN/CSA-ISO/IEC 10175-3:02Information technology Text andoffice systems Document PrintingApplication (DPA) Part 3: Man
19、agement abstract servicedefinitions and proceduresCSA PrefaceStandards development within the Information Technology sector is harmonized with internationalstandards development. Through the CSA Technical Committee on Information Technology (TCIT),Canadians serve as the Canadian Advisory Committee (
20、CAC) on ISO/IEC Joint Technical Committee 1 onInformation Technology (ISO/IEC JTC1) for the Standards Council of Canada (SCC), the ISO memberbody for Canada and sponsor of the Canadian National Committee of the IEC. Also, as a member of theInternational Telecommunication Union (ITU), Canada particip
21、ates in the International Telegraph andTelephone Consultative Committee (ITU-T).This International Standard was reviewed by the CSA TCIT under the jurisdiction of the StrategicSteering Committee on Information Technology and deemed acceptable for use in Canada. (Acommittee membership list is availab
22、le on request from the CSA Project Manager.) From time to time,ISO/IEC may publish addenda, corrigenda, etc. The CSA TCIT will review these documents for approvaland publication. For a listing, refer to the CSA Information Products catalogue or CSA Info Update orcontact a CSA Sales representative. T
23、his Standard has been formally approved, without modification, bythe Technical Committee and has been approved as a National Standard of Canada by the StandardsCouncil of Canada.December 2002 Canadian Standards Association 2002All rights reserved. No part of this publication may be reproduced in any
24、 form whatsoever without the priorpermission of the publisher. ISO/IEC material is reprinted with permission. Where the words “thisInternational Standard” appear in the text, they should be interpreted as “this National Standard ofCanada”. Inquiries regarding this National Standard of Canada should
25、be addressed to Canadian Standards Association 5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N6 1-800-463-6727 416-747-4044www.csa.caReference numberISO/IEC 10175-3:2000(E)ISO/IEC 2000INTERNATIONALSTANDARDISO/IEC10175-3First edition2000-12-15Information technology Text and officesy
26、stems Document Printing Application(DPA) Part 3:Management abstract service definitionsand proceduresTechnologies de linformation Bureautique Application impressionde documents (DPA) Partie 3: Dfinitions et procdures de service abstrait de gestionISO/IEC 10175-3:2000(E)PDF disclaimerThis PDF file ma
27、y contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall notbe edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading thisfile, parties accept therein the respon
28、sibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in thisarea.Adobe is a trademark of Adobe Systems Incorporated.Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation pa
29、rameterswere optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely eventthat a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO/IEC 2000All rights reserved. Unless othe
30、rwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronicor mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member bodyin the country of the requester.ISO copyright o
31、fficeCase postale 56 Gb7 CH-1211 Geneva 20Tel. + 41 22 749 01 11Fax + 41 22 749 09 47E-mail copyrightiso.chWeb www.iso.chii ISO/IEC 2000 All rights reservedISO/IEC 10175-3:2000(E) ISO/IEC 2000 All rights reserved iiiContentsSection 1 - General 11 Scope 12 Normative references. 13 Definitions . 24 Ab
32、breviations . 25 Conventions. 2Section 2 - DP management abstract service definition 36 DP abstract model 37 Abstract association information . 38 Abstract operations . 38.1 Common datatypes and values used in DP management abstract operations 48.1.1 Imported datatypes 48.1.2 Datatypes common for mo
33、st DPA abstract operations . 58.1.2.1 Common-arguments 58.1.2.2 Message 58.2 DP-User Port Abstract Operation Definitions 58.3 DP-Administration Port Abstract-Operation Definitions . 58.3.1 Clean. 58.3.1.1 Clean-argument . 68.3.1.2 Clean-result 78.3.1.3 Clean Abstract-errors 78.3.2 Control 78.3.2.1 C
34、ontrol-argument 88.3.2.2 Control-result 98.3.2.3 Control Abstract-errors 10ISO/IEC 10175-3:2000(E)iv ISO/IEC 2000 All rights reserved8.3.3 Create . 108.3.3.1 Create-argument . 118.3.3.2 Create-result . 138.3.3.3 Create Abstract-errors . 148.3.4 Delete . 158.3.4.1 Delete-argument . 158.3.4.2 Delete-r
35、esult . 188.3.4.3 Delete Abstract-errors . 188.3.5 Disable . 198.3.5.1 Disable-argument 198.3.5.2 Disable-result . 208.3.5.3 Disable Abstract-errors . 208.3.6 Enable. 208.3.6.1 Enable-argument . 218.3.6.2 Enable-result 228.3.6.3 Enable Abstract-errors 228.3.7 Pause 228.3.7.1 Pause-argument 228.3.7.2
36、 Pause-result 238.3.7.3 Pause Abstract-errors 248.3.8 Resubmit-job. 248.3.8.1 Resubmit-job-argument . 268.3.8.2 Resubmit-job-result 278.3.8.3 Resubmit-job Abstract-errors 288.3.9 Resume . 288.3.9.1 Resume-argument . 288.3.9.2 Resume-result . 298.3.9.3 Resume Abstract-errors . 308.3.10 Set 308.3.10.1
37、 Set-argument. 318.3.10.2 Set-result 338.3.10.3 Set Abstract-errors 358.3.11 Shutdown 358.3.11.1 Shutdown-argument 368.3.11.2 Shutdown-result 388.3.11.3 Shutdown Abstract-errors 388.4 Abstract-Errors 388.5 Abstract-Events . 38Annex A (normative) Formal definition of the DPA management abstract servi
38、ce . 39Annex B (normative) Conformance requirements 46B.1 Conformance level 3 . 46B.2 Conformance level 3M . 46ISO/IEC 10175-3:2000(E) ISO/IEC 2000 All rights reserved vForewordISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission)form the sp
39、ecialized system for worldwide standardization. National bodies that are members of ISO or IECparticipate in the development of International Standards through technical committees established by therespective organization to deal with particular fields of technical activity. ISO and IEC technical c
40、ommitteescollaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, inliaison with ISO and IEC, also take part in the work.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.In the field of inf
41、ormation technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting.Publication as an International Standard requires approval by at least 75 % of the national
42、 bodies casting a vote.Attention is drawn to the possibility that some of the elements of this part of ISO/IEC 10175 may be the subject ofpatent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.International Standard ISO/IEC 10175-3 was prepared by Join
43、t Technical Committee ISO/IEC JTC 1, Informationtechnology, Subcommittee SC 6, Telecommunications and information exchange between systems.ISO/IEC 10175 consists of the following parts, under the general title Information technology Test and officesystems Document Printing Application (DPA):Gbe Part
44、 1: Abstract service definition and proceduresGbe Part 2: Protocol specificationGbe Part 3: Management abstract service definitions and proceduresAnnexes A and B form a normative part of this part of ISO/IEC 10175.INTERNATIONAL STANDARD ISO/IEC 10175-3:2000(E)1Information technology Text and office
45、systems Document Printing Application (DPA) Part 3:Management abstract service definitions and proceduresSection 1 - General1 ScopeThe Document Printing Application is one component of a coordinated set of facilities and standards needed tosatisfy the printing requirements of the modern distributed
46、office. Together, the capabilities provided can enableusers to create and produce high-quality office documents in a consistent and unambiguous manner within adistributed open systems environment.The Document Printing Application Standard (ISO/IEC 10175) consists of three parts:Part 1: Abstract serv
47、ice definitions and proceduresPart 2: Protocol specificationPart 3: Management abstract service definition and proceduresThis part of ISO/IEC 10175 extends the facilities specified in ISO/IEC 10175-1 by adding the capability foradministrators and operators to manage and control printers, print serve
48、rs and all other print objects; in addition, thispart specifies additional capabilities for a print client to control a print job. The text and specifications contained inthis part of ISO/IEC 10175 are derived from IEEE 1387.4 (POSIX) - System Administration Part 4 - PrintingInterfaces. In particula
49、r, this part of ISO/IEC 10175:- specifies additional administrative functions an d services that may be provided by Document PrintingApplication servers;- specifies the Document Printing Application abstract service for the additional administrative functionsusing the principles established by the Abstract Service Definition Conventions (ISO/IEC 10021-3);- specifies the requirements for conformance with the Document Printing Application for these additionaladministrative functions.See clause 1 of ISO/IEC 1017
