1、 ISO/IEC 2015. CSA Group 2015. All rights reserved. Unauthorized reproduction is strictly prohibited.CAN/CSA-ISO/IEC 13273-1:15(ISO/IEC 13273-1:2015, IDT)National Standard of CanadaCAN/CSA-ISO/IEC 13273-1:15Energy efficiency and renewable energy sources Commoninternational terminology Part 1: Energy
2、 efficiency(ISO/IEC 13273-1:2015, IDT)Legal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approvedby the Standards Council of Canada. This process brings together volunteers representing varied viewp
3、oints and interests to achieve consensusand develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it doesnot independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document
4、is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation,implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringementof any third partys intell
5、ectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the informationpublished in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicablestatute, rule, or regulation.IN NO EVENT SHALL CSA G
6、ROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS,OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED,INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE,
7、BUSINESS INTERRUPTION, LOST OR DAMAGEDDATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS,WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHERTHEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUPHAS BEEN ADVISED OF THE POS
8、SIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of anyperson or entity or to perform any duty owed by any person or entity to another person or entity.
9、The information in this document is directedto those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoeverarising in any way from any and all use of or reliance on the information contained in this document.CSA Group is a priv
10、ate not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does itundertake, to enforce compliance with the contents of the standards or other documents it publishes.Intellectual property rights and ownershipAs between CSA Group and the users of
11、this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorizedlicensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and allinventions and trade secrets that may be contained in thi
12、s document, whether or not such inventions and trade secrets are protected bypatents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document mayviolate laws that protect CSA Groups and/or others intellectual property and may give
13、rise to a right in CSA Group and/or others to seek legalredress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectualproperty rights in this document.Patent rightsAttention is drawn to the possibility that some of the el
14、ements of this standard may be the subject of patent rights. CSA Group shall not beheld responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity ofany such patent rights is entirely their own responsibility.Authorized
15、use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to doonly the following:If this document is in electronic form: load this document onto a computer for the sole purpose of reviewing it; search and
16、browse this document; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group to have suchcopies, and only if this Legal Notice appears on each such copy.In addition, users may not and ma
17、y not permit others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document without authorization from CSA Group; or make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice,
18、you may not load or use this document or make anycopies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this documentconstitutes your acceptance of the terms and conditions of this Legal Notice.Standards Update ServiceCAN/CSA-ISO/IEC 13273
19、-1:15August 2015Title: Energy efficiency and renewable energy sources Common international terminology Part 1: Energy efficiencyTo register for e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that you will need to register for update
20、s to this publication is 2424041.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at www.csagroup.org/legal to find out how we protect yourpersonal information.Canadian Standards Association (operating as “CSA Group”), underwhos
21、e auspices this National Standard has been produced, waschartered in 1919 and accredited by the Standards Council ofCanada to the National Standards system in 1973. It is a not-for-profit, nonstatutory, voluntary membership association engaged instandards development and certification activities.CSA
22、 Group standards reflect a national consensus of producers andusers including manufacturers, consumers, retailers, unions andprofessional organizations, and governmental agencies. Thestandards are used widely by industry and commerce and oftenadopted by municipal, provincial, and federal governments
23、 in theirregulations, particularly in the fields of health, safety, building andconstruction, and the environment.Individuals, companies, and associations across Canada indicatetheir support for CSA Groups standards development byvolunteering their time and skills to Committee work and supportingCSA
24、 Groups objectives through sustaining memberships. The morethan 7000 committee volunteers and the 2000 sustainingmemberships together form CSA Groups total membership fromwhich its Directors are chosen. Sustaining memberships represent amajor source of income for CSA Groups standards developmentacti
25、vities.CSA Group offers certification and testing services in support of andas an extension to its standards development activities. To ensurethe integrity of its certification process, CSA Group regularly andcontinually audits and inspects products that bear theCSA Group Mark.In addition to its hea
26、d office and laboratory complex in Toronto, CSAGroup has regional branch offices in major centres across Canadaand inspection and testing agencies in eight countries. Since 1919,CSA Group has developed the necessary expertise to meet itscorporate mission: CSA Group is an independent serviceorganizat
27、ion whose mission is to provide an open and effectiveforum for activities facilitating the exchange of goods and servicesthrough the use of standards, certification and related services tomeet national and international needs.For further information on CSA Group services, write toCSA Group178 Rexdal
28、e BoulevardToronto, Ontario, M9W 1R3CanadaA National Standard of Canada is a standard developed by an SCC-accredited Standards Development Organization (SDO), andapproved by the Standards Council of Canada (SCC), in accordancewith SCCs: Requirements and Guidance Accreditation forStandards Developmen
29、t Organizations, and Requirements andGuidance Approval of National Standards of Canada Designation.More information on National Standard requirements can be foundat www.scc.ca.An SCC-approved standard reflects the consensus of a number ofexperts whose collective interests provide, to the greatestpra
30、cticable extent, a balance of representation of affectedstakeholders. National Standards of Canada are intended to make asignificant and timely contribution to the Canadian interest.SCC is a Crown corporation within the portfolio of Industry Canada.With the goal of enhancing Canadas economic competi
31、tiveness andsocial well-being, SCC leads and facilitates the development and useof national and international standards. SCC also coordinatesCanadian participation in standards development, and identifiesstrategies to advance Canadian standardization efforts.Accreditation services are provided by SC
32、C to various customers,including product certifiers, testing laboratories, and standardsdevelopment organizations. A list of SCC programs and accreditedbodies is publicly available at www.scc.ca.Users should always obtain the latest edition of a National Standardof Canada from the standards developm
33、ent organization responsiblefor its publication, as these documents are subject to periodicreview.Standards Council of Canada600-55 Metcalfe StreetOttawa, Ontario, K1P 6L5CanadaCette Norme Nationale du Canada est disponible en versions franaise et anglaise.Although the intended primary application o
34、f this Standard is stated in its Scope, it is important to note that it remains the responsibility ofthe users to judge its suitability for their particular purpose.TMA trade-mark of the Canadian Standards Association, operating as “CSA Group”ICS 27.010ISBN 978-1-4883-0150-6 2015 CSA GroupAll rights
35、 reserved. No part of this publication may be reproduced in any form whatsoeverwithout the prior permission of the publisher.Published in August 2015 by CSA GroupA not-for-profit private sector organization178 Rexdale Boulevard, Toronto, Ontario, Canada M9W 1R3To purchase standards and related publi
36、cations, visit our Online Store at shop.csa.caor call toll-free 1-800-463-6727 or 416-747-4044.TMA trade-mar k of the Canadian S tandards Association, operating as “CSA Group”Reviewed byPrepared byInternational Organization for Standardization/International Electrotechnical CommissionApproved byEner
37、gy efficiency and renewable energysources Common internationalterminology Part 1: Energy efficiency(ISO/IEC 13273-1:2015, IDT)CAN/CSA-ISO/IEC 13273-1:15National Standard of CanadaCAN/CSA-ISO/IEC 13273-1:15Energy efficiency and renewable energy sources Commoninternational terminology Part 1: Energy e
38、fficiencyAugust 2015 2015 CSA GroupCSA/5CAN/CSA-ISO/IEC 13273-1:15Energy efficiency and renewable energysources Common internationalterminology Part 1: Energy efficiency(ISO/IEC 13273-1:2015, IDT)CSA PrefaceThis is the first edition of CAN/CSA-ISO/IEC 13273-1, Energy efficiency and renewable energy
39、sources Common international terminology Part 1: Energy efficiency , which is an adoption withoutmodification of the identically titled ISO/IEC (International Organization for Standardization/International Electrotechnical Commission) Standard 13273-1 (first edition, 2015-06-01).For brevity, this St
40、andard will be referred to as “CAN/CSA-ISO/IEC 13273-1” throughout.This part of ISO/IEC 13273 contains transverse concepts and their definitions in the subject fields ofenergy efficiency. This horizontal standard is primarily intended for use by technical committees in thepreparation of standards in
41、 accordance with the principles laid down in IEC Guide 108. The contents ofthis horizontal standard will not apply unless specifically referred to or included in the relevantpublications.This Standard was reviewed for Canadian adoption by the CSA Technical Committee on EnergyManagement, under the ju
42、risdiction of the CSA Strategic Steering Committee on Business Managementand Sustainability, and has been formally approved by the Technical Committee. This Standard has beenapproved as a National Standard of Canada by the Standards Council of Canada. 2015 CSA GroupAll rights reserved. No part of th
43、is publication may be reproduced in any form whatsoever without theprior permission of the publisher. ISO/IEC material is reprinted with permission. Where the words “thisInternational Standard” appear in the text, they should be interpreted as “this National Standard ofCanada”.Inquiries regarding th
44、is National Standard of Canada should be addressed toCSA Group178 Rexdale Boulevard,Toronto, Ontario, Canada M9W 1R31-800-463-6727 416-747-4000http:/csa.caTo purchase standards and related publications, visit our Online Store at shop.csa.ca or call toll-free1-800-463-6727 or 416-747-4044.CAN/CSA-ISO
45、/IEC 13273-1:15Energy efficiency and renewable energy sources Commoninternational terminology Part 1: Energy efficiencyAugust 2015 2015 CSA GroupCSA/6This Standard is subject to review five years from the date of publication, and suggestions for itsimprovement will be referred to the appropriate com
46、mittee. To submit a proposal for change, pleasesend the following information to inquiriescsagroup.org and include “Proposal for change” in thesubject line:a) Standard designation (number);b) relevant clause, table, and/or figure number;c) wording of the proposed change; andd) rationale for the chan
47、ge.CSA Technical Committee on EnergyManagementR.C. Morrison RC Management,Burlington, OntarioCategory: User InterestChairF. Allard Natural Resources Canada,Ottawa, OntarioCategory: Government and/or Regulatory AuthorityVice-ChairH. Aubin Hydro-Qubec Distribution,Saint-Bruno, QubecCategory: Producer
48、InterestP. BassettEnergy Performance Services (EPS/Canada) Inc.,Beaconsfield, QubecCategory: General InterestM. Burke Public Works in thermal systems, heat supply or heat removal.SOURCE: 1986 World Energy Conference Energy Terminology glossary, modified The word “the” at the beginning of the descrip
49、tion was removed, the symbols were added as was the Note 1 to entry from ISO 50001:2011.3.1.2energy carriersubstance or medium that can transport energyEXAMPLE Electricity, hydrogen, fuels.INTERNATIONAL STANDARD ISO/IEC 13273-1:2015(E) ISO/IEC 2015 All rights reserved 1CAN/CSA-ISO/IEC 13273-1:15ISO/IEC 13273-1:2015(E)3.1.3feedstock energyenergy (3.1.1) of material used for purposes other than producing work or activityEXAMPLE Crude oil injected into steel smelting is for deoxidization but it contributes to the energy
