1、Information technology Coding of audio-visual objects Part4:Conformance testing AMENDMENT38:ConformancetestingforMultiviewVideoCodingAmendment 38:2012 (IDT) toNational Standard of CanadaCAN/CSA-ISO/IEC 14496-4-06(ISO/IEC 14496:2004, IDT)NOT FOR RESALE.PUBLICATION NON DESTINE LA REVENTE.CSA Standards
2、 Update ServiceAmendment 38:2012 toCAN/CSA-ISO/IEC 14496-4-06March 2012Title:Information technology Coding of audio-visual ob jects Part4:Conformance testing AMENDMENT38: ConformancetestingforMultiviewVideoCodingPagination:10 pages (iii preliminary and 7 text)To register for e-mail notification abou
3、t any updates to this publication go on-line to shop.csa.caclick on E-mail Services under MY ACCOUNTclick on CSA Standards Update ServiceThe List ID that you will need to register for updates to this publication is 2418413.If you require assistance, please e-mail techsupportcsa.ca or call 416-747-22
4、33.Visit CSAs policy on privacy at csagroup.org/legal to find out how we protect your personal information.Reference numberISO/IEC 14496-4:2004/Amd.38:2010(E)ISO/IEC 2010INTERNATIONAL STANDARD ISO/IEC14496-4Second edition2004-12-15AMENDMENT 382010-05-01Information technology Coding of audio-visual o
5、bjects Part 4: Conformance testing AMENDMENT 38: Conformance testing for Multiview Video Coding Technologies de linformation Codage des objets audiovisuels Partie 4: Essai de conformit AMENDEMENT 38: Essais de conformit pour cogage vido multivues ISO/IEC 14496-4:2004/Amd.38:2010(E) PDF disclaimer Th
6、is PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept th
7、erein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file;
8、the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOC
9、UMENT ISO/IEC 2010 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member
10、 body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org ii ISO/IEC 2010 All rights reservedISO/IEC 14496-4:2004/Amd.38:2010(E) ISO/IEC 2010 All rights reserved iiiForeword ISO (
11、the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees
12、 established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work.
13、In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standa
14、rds. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements
15、 of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Amendment 38 to ISO/IEC 14496-4:2004 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 29, Coding of audio, p
16、icture, multimedia and hypermedia information. This Amendment establishes conformance test requirements for conformance to ITU-T Rec. H.264 | ISO/IEC 14496-10. In this Amendment, additional text to ITU-T Rec. H.264 | ISO/IEC 14496-10 is specified for testing the conformance of ITU-T Rec. H.264 | ISO
17、/IEC 14496-10 video decoders including in particular the MVC Profiles, which consist of the Multiview High and Stereo High profiles. This Amendment specifies the normative tests for verifying conformance of ITU-T Rec. H.264 | ISO/IEC 14496-10 video bitstreams and decoders. These normative tests make
18、 use of test data (bitstream test suites) provided as an electronic attachment to this Amendment, and of the reference software decoder specified in ITU-T Rec. H.264.2 | ISO/IEC 14496-5 with source code available in electronic format. Amendment 38:2012 to CAN/CSA-ISO/IEC 14496-4-06Amendment 38:2012
19、to CAN/CSA-ISO/IEC 14496-4-06ISO/IEC 14496-4:2004/Amd.38:2010(E) ISO/IEC 2010 All rights reserved 1Information technology Coding of audio-visual objects Part 4: Conformance testing AMENDMENT 38: Conformance testing for Multiview Video Coding In 10.6.5.7, add the following text at the end of the subc
20、lause: A decoder that conforms to the Multiview High profile at a specific level shall be capable of decoding all bitstreams in which all active MVC sequence parameter sets have any of the following. profile_idc equal to 118 profile_idc equal to 100 or 77 and constraint_set4_flag is equal to 1 profi
21、le_idc equal to 88 and constraint_set1_flag equal to 1 and constraint_set4_flag is equal to 1 profile_idc equal to 66 and constraint_set1_flag equal to 1 and in which level_idc or the combination of level_idc and constraint_set3_flag for all active MVC sequence parameter sets represent a level less
22、than or equal to the specific level. In addition to the bitstreams defined in Table AMD38-1, a decoder that conforms to the Multiview High profile shall be capable of decoding the Main profile bitstreams specified in Table AMD6-1, and the High profile bitstreams specified in Table AMD9-2. A decoder
23、that conforms to the Stereo High profile at a specific level shall be capable of decoding all bitstreams in which all active MVC sequence parameter sets have any of the following. profile_idc equal to 118 and constraint_set5_flag is equal to 1 profile_idc equal to 128 profile_idc equal to 100 or 77
24、profile_idc equal to 88 and constraint_set1_flag equal to 1 profile_idc equal to 66 and constraint_set1_flag equal to 1 and in which level_idc or the combination of level_idc and constraint_set3_flag for all active MVC sequence parameter sets represent a level less than or equal to the specific leve
25、l. In addition to the bitstreams defined in Table AMD38-1, a decoder that conforms to the Stereo High profile shall be capable of decoding the Main profile bitstreams specified in Table AMD6-1, and the High profile bitstreams specified in Table AMD9-2. Amendment 38:2012 to CAN/CSA-ISO/IEC 14496-4-06
26、ISO/IEC 14496-4:2004/Amd.38:2010(E) 2 ISO/IEC 2010 All rights reservedAfter 10.6.6.32.3, add the following text: 10.6.6.33 Test bitstreams Multiview High Profile 10.6.6.33.1 Test bitstream #MVCDS-1 Specification: All slices are coded as I slices. Only the first picture is coded as an IDR access unit
27、. Each view component contains only one slice. num_views_minus1 is equal to 1. num_anchor_refs_lX and num_non_anchor_refs_lX are equal to 0. All NAL units are encapsulated into the byte stream format specified in Annex B in ITU-T Rec. H.264 | ISO/IEC 14496-10. Functional stage: Decoding of two views
28、 without inter-prediction or inter-view prediction. Purpose: Check that the decoder can properly decode multiple view components. 10.6.6.33.2 Test bitstream #MVCDS-2 Specification: All slices are coded as I, P or B slices. Only the first picture is coded as an IDR access unit. Each view component co
29、ntains only one slice. num_views_minus1 is equal to 1. num_anchor_refs_lX and num_non_anchor_refs_lX are equal to 0. All NAL units are encapsulated into the byte stream format specified in Annex B in ITU-T Rec. H.264 | ISO/IEC 14496-10. Functional stage: Decoding of two views with inter-prediction,
30、but without inter-view prediction. Purpose: Check that the decoder can properly decode multiple view components with inter-prediction. 10.6.6.33.3 Test bitstream #MVCDS-3 Specification: All slices are coded as I or P slices. Only the first picture is coded as an IDR access unit with all subsequent p
31、ictures coded as anchor access units. Each view component contains only one slice. num_views_minus1 is equal to 1. num_anchor_refs_l0 is equal to 1, num_anchor_refs_l1 is equal to 0, and num_non_anchor_refs_lX are equal to 0. All NAL units are encapsulated into the byte stream format specified in An
32、nex B in ITU-T Rec. H.264 | ISO/IEC 14496-10. Functional stage: Decoding of two views with inter-view prediction in anchor pictures, but without inter-prediction within views. Purpose: Check that the decoder can properly decode multiple view components with inter-view prediction in anchor pictures.
33、10.6.6.33.4 Test bitstream #MVCDS-4 Specification: All slices are coded as I, P or B slices. Only the first picture is coded as an IDR access unit. Each view component contains only one slice. num_views_minus1 is equal to 1. num_anchor_refs_l0 is equal to 1, and num_non_anchor_refs_l0 is equal to 0.
34、 All NAL units are encapsulated into the byte stream format specified in Annex B in ITU-T Rec. H.264 | ISO/IEC 14496-10. Functional stage: Decoding of two views with inter-prediction, and inter-view prediction in anchor pictures. Purpose: Check that the decoder can properly decode multiple view comp
35、onents with inter-prediction, as well as inter-view prediction in anchor pictures. Amendment 38:2012 to CAN/CSA-ISO/IEC 14496-4-06ISO/IEC 14496-4:2004/Amd.38:2010(E) ISO/IEC 2010 All rights reserved 310.6.6.33.5 Test bitstream #MVCDS-5 Specification: All slices are coded as I, P or B slices. Only th
36、e first picture is coded as an IDR access unit. Each view component contains only one slice. num_views_minus1 is equal to 1. num_anchor_refs_l0 and num_non_anchor_refs_l0 are equal to 1. All NAL units are encapsulated into the byte stream format specified in Annex B in ITU-T Rec. H.264 | ISO/IEC 144
37、96-10. Functional stage: Decoding of two views with inter-prediction, and inter-view prediction in both anchor pictures and non-anchor pictures. Purpose: Check that the decoder can properly decode multiple view components with inter-prediction, as well as inter-view prediction in both anchor and non
38、-anchor access units. 10.6.6.33.6 Test bitstream #MVCDS-6 Specification: All slices are coded as I, P or B slices. Only the first picture is coded as an IDR access unit. Each view component contains only one slice. num_views_minus1 is equal to 1. num_anchor_refs_l0 and num_non_anchor_refs_l0 are equ
39、al to 1. inter_view_flag is equal to 0 for a subset of non-anchor view components of the base view. All NAL units are encapsulated into the byte stream format specified in Annex B in ITU-T Rec. H.264 | ISO/IEC 14496-10. Functional stage: Decoding of two views with inter-prediction, and inter-view pr
40、ediction in both anchor pictures and non-anchor pictures. Purpose: Check that the decoder can properly decode multiple view components with inter-prediction, as well as inter-view prediction in both anchor and non-anchor access units, with different settings of inter_view_flag in different view comp
41、onents. 10.6.6.33.7 Test bitstream #MVCNV-1 Specification: All slices are coded as I, P or B slices. Only the first picture is coded as an IDR access unit. Each view component contains only one slice. num_views_minus1 is equal to 2, and the views are denoted as A, B, and C, where view A is the base
42、view, and view B and C are non-base views. View B refers to view A, and view C refers to view B. num_anchor_refs_l0 and num_non_anchor_refs_l0 for view B and C are equal to 1, respectively. All NAL units are encapsulated into the byte stream format specified in Annex B in ITU-T Rec. H.264 | ISO/IEC
43、14496-10. Functional stage: Decoding of three views with inter-prediction and inter-view prediction in anchor access units and non-anchor pictures. Purpose: Check that the decoder can properly decode three views with inter-prediction, as well as inter-view prediction in anchor access units. 10.6.6.3
44、3.8 Test bitstream #MVCNV-2 Specification: All slices are coded as I, P or B slices. Only the first picture is coded as an IDR access unit. Each view component contains only one slice. num_views_minus1 is equal to 7, and the views are denoted as A, B, C, D, E, F, G, H, where view A is the base view,
45、 and other views are non-base views. View C refers to view A, view B refers to view A and view C, view E refers to view C, view D refers to view C and view E, view G refers to view E, view F refers to view E and view G, and view H refers to view G. num_anchor_refs_l0 and num_non_anchor_refs_l0 for v
46、iew C, E, G, and H are equal to 1, respectively, and num_anchor_refs_lX (X=0,1) and num_non_anchor_refs_lX (X=0,1) for view B, D, and F are equal to 1, respectively. All NAL units are encapsulated into the byte stream format specified in Annex B in ITU-T Rec. H.264 | ISO/IEC 14496-10. Functional sta
47、ge: Decoding of eight views with inter-prediction and inter-view prediction in anchor access units and non-anchor pictures. Amendment 38:2012 to CAN/CSA-ISO/IEC 14496-4-06ISO/IEC 14496-4:2004/Amd.38:2010(E) 4 ISO/IEC 2010 All rights reservedPurpose: Check that the decoder can properly decode eight v
48、iews with inter-prediction, as well as inter-view prediction in anchor access units. 10.6.6.33.9 Test bitstream #MVCNV-3 Specification: All slices are coded as I, P or B slices. Only the first picture is coded as an IDR access unit. Each view component contains only one slice. num_views_minus1 is eq
49、ual to 2, and the views are denoted as A, B, and C, where view A is the base view, and views B and C are non-base views. View B refers to view A, and view C does not refer to either view A or B, i.e., it is an independently coded non-base view. num_anchor_refs_l0 and num_non_anchor_refs_l0 for view C is equal to 1. All NAL units are encapsulated into the byte stream format specified in Annex B in ITU-T Rec. H.264 | ISO/IEC 14496-10. Functional stage: Decoding of three views including a base view with inte
