1、 Reference numberISO/IEC 14496-5:2001/Amd.5:2004(E)ISO/IEC 2004INTERNATIONAL STANDARD ISO/IEC14496-5Second edition2001-12-15AMENDMENT 52004-11-01Information technology Coding of audio-visual objects Part 5: Reference software AMENDMENT 5: Reference software extensions for error resilient simple scal
2、able profile Technologies de linformation Codage des objets audiovisuels Partie 5: Logiciel de rfrence AMENDEMENT 5: Extensions du logiciel de rfrence pour profil simple adaptable rsilient aux erreurs Amendment 5:2006 toNational Standard of CanadaCAN/CSA-ISO/IEC 14496-5:06Amendment 5:2004 to Inte rn
3、ational Standard ISO/IEC 14496-5:2001 has been adopted withoutmodification (IDT) as Amendment 5:2006 to CAN/CSA-ISO/IEC 14496-5:06. This Amendment was reviewedby the CSA Technical Committee on Information Technology (TCIT) under the jurisdiction of the StrategicSteering Committee on Information Tech
4、nology and deemed acceptable for use in Canada.December 2006ISO/IEC 14496-5:2001/Amd.5:2004(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded a
5、re licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Detai
6、ls of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem re
7、lating to it is found, please inform the Central Secretariat at the address given below. ISO/IEC 2004 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm
8、, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org ii ISO/IEC 2004 All rights reservedAme
9、ndment 5:2006 toCAN/CSA-ISO/IEC 14496-5:06Information technology Coding of audio-visul objects Part 5: Reference softwareTechnical Corrigendum 1:2013 (IDT) toAmendment 5:2006 toNational Standard of CanadaCAN/CSA-ISO/IEC 14496-5-06(ISO/IEC 14496-5:2001, IDT)NOT FOR RESALE. / PUBLICATION NON DESTINE L
10、A REVENTE.Standards Update ServiceTechnical Corrigendum 1:2013 to Amendment 5:2006 toCAN/CSA-ISO/IEC 14496-5-06January 2013Title: Information technology Coding of audio-visul objects Part 5: Reference softwarePagination: 3 pagesTo register for e-mail notification about any updates to this publicatio
11、ngo to shop.csa.caclick on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2418156.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legal to find out how we protect
12、 your personal information.INTERNATIONAL STANDARD ISO/IEC 14496-5:2001/Amd.5:2004 TECHNICAL CORRIGENDUM 1 Published 2011-10-15 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ORGANISATION INTERNATIONALE DE NORMALISATIONINTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION LECTROTECHNIQUE INTERNATIONAL
13、EInformation technology Coding of audio-visual objects Part 5: Reference software AMENDMENT 5: Reference software extensions for error resilient simple scalable profile TECHNICAL CORRIGENDUM 1 Technologies de linformation Codage des objets audiovisuels Partie 5: Logiciel de rfrence AMENDEMENT 5: Ext
14、ensions du logiciel de rfrence pour profil simple adaptable rsilient aux erreurs RECTIFICATIF TECHNIQUE 1 Technical Corrigendum 1 to ISO/IEC 14496-5:2001/Amd.5:2004 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 29, Coding of audio, picture, multimed
15、ia and hypermedia information. ICS 35.040 Ref. No. ISO/IEC 14496-5:2001/Amd.5:2004/Cor.1:2011(E) ISO/IEC 2011 All rights reserved Technical Corrigendum 1:2013 to Amendment 5:2006 to CAN/CSA-ISO.IEC 14496-5-06ISO/IEC 14496-5:2001/Amd.5:2004/Cor.1:2011(E) 2 ISO/IEC 2011 All rights reservedReplace Clau
16、se 4 with: 4 Visual reference software Location Content Video/natural/MoMuSys_20100117_nctu Natural video decoder in C video/natural/microsoft-v2.5-091026-NTU Natural video decoder in C+ video/snhc/FBA_V2 Face and body animation decoder video/snhc/m3d20010209 3D mesh decoder integrated by Samsung vi
17、deo/snhc/Dct DCT-based FAP decoder video/snhc/Fit FIT decoder video/snhc/Fit_liu FIT decoder video/snhc/Ist/codec FAP decoder video/snhc/Mesh2D Dynamic 2D mesh geometry and motion decoding video/snhc/rockwell_epfl_v18 FAP decoder video/snhc/rockwell_vds2 View-dependent texture decoding with back cha
18、nnel video/natural/microsoft-v2.5-091026-NTU Visual Texture decoder in C+ video/natural/microsoft-v2.5-091026-NTU Error resilience scalable decoder in C+ Replace A.2 with: A.2 Visual encoding software Location Content video/natural/MoMuSys_20100117_nctu Natural video encoder in C video/natural/micro
19、soft-v2.5-091026-NTU Natural video encoder in C+ video/snhc/FBA_V2 Face and body animation encoder by EPFL video/snhc/m3d20010209 3D mesh encoder integrated by Samsung video/snhc/DCT DCT-based FAP encoder video/snhc/FIT FIT encoder video/snhc/fit_liu FIT encoder video/snhc/IST/codec FAP encoder vide
20、o/snhc/Mesh2D Dynamic 2D mesh geometry and motion encoding video/snhc/rockwell_epfl_v18 FAP encoder Technical Corrigendum 1:2013 to Amendment 5:2006 to CAN/CSA-ISO.IEC 14496-5-06ISO/IEC 14496-5:2001/Amd.5:2004/Cor.1:2011(E) ISO/IEC 2011 All rights reserved 3video/snhc/rockwell_vds2 View-dependent te
21、xture encoding with back channel video/natural/microsoft-v2.5-091026-NTU Visual Texture encoder in C+ video/natural/microsoft-v2.5-091026-NTU Error resilience scalable encoder in C+ Replace the following subdirectory with the electronic attachment of this Corrigendum. Replace: videonaturalMoMuSys-1.
22、0-001220_sony videonaturalmicrosoft-2.3-001213 videonaturalMicrosoft-vtc-update videonaturalmicrosoft-2.5-040207-NTU with: videonaturalMoMuSys_20100117_nctu videonaturalmicrosoft-v2.5-091026-NTU Technical Corrigendum 1:2013 to Amendment 5:2006 to CAN/CSA-ISO.IEC 14496-5-06Copyright NoticeThis Amendm
23、ent to the International Standard contains information copyright protected by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). Except as permitted under the laws of Canada, no extract of this Amendment to the International Standard may
24、 be reproduced, stored in any retrieval system, or transmitted in any form or by any means, electronic, photocopying, recording, or otherwise, without prior permission from the Standards Council of Canada (SCC). Requests for permission to reproduce this Amendment to the International Standard or par
25、ts thereof should be addressed to Manager, Technical Document Centre Standards Council of Canada 270 Albert Street, Suite 200 Ottawa, Ontario K1P 6N7 The Canadian adoption of this Amendment to the International Standard contains information copyright protected by CSA Group. All rights reserved. No p
26、art of this adopted Amendment may be reproduced in any form whatsoever without the prior permission of the publisher. ISO/IEC material is reprinted with permission. Requests for permission to reproduce this adopted Amendment or parts thereof should be addressed to Manager, Sales CSA Group 5060 Spect
27、rum Way, Suite 100 Mississauga, Ontario L4W 5N6Copyright violators will be prosecuted to the full extent of the law.PRINTED IN CANADAIMPRIMEAU CANADA100%CSA Group prints its publications on Rolland Enviro100, which contains 100% recycled post-consumer fibre, is EcoLogo and Processed Chlorine Free ce
28、rtified, and was manufactured using biogas energy.ISO/IEC 14496-5:2001/Amd.5:2004(E) ISO/IEC 2004 All rights reserved iiiForeword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization
29、. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual in
30、terest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance wi
31、th the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard re
32、quires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Amendment 5 to ISO/IE
33、C 14496-5:2001 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 29, Coding of audio, picture, multimedia and hypermedia information. Amendment 5:2006 toCAN/CSA-ISO/IEC 14496-5:06ISO/IEC 14496-5:2001/Amd.5:2004(E) ISO/IEC 2004 All rights reserved 1Infor
34、mation technology Coding of audio-visual objects Part 5: Reference software AMENDMENT 5: Reference software extensions for error resilient simple scalable profile Replace Clause 4 with: 4 Visual reference software Location Content video/natural/MoMuSys -1.0-001220_sony Natural video decoder in C vid
35、eo/natural/microsoft -2.3-001213 Natural video decoder in C+ video/snhc/FBA_V2 Face and body animation decoder video/snhc/m3d20010209 3D mesh decoder integrated by Samsung video/snhc/Dct DCT-based FAP decoder video/snhc/Fit FIT decodervideo/snhc/Fit_liu FIT decodervideo/snhc/Ist/codec FAP decoder vi
36、deo/snhc/Mesh2D Dynamic 2D mesh geometry and motion decoding video/snhc/rockwell_epfl_v18 FAP decoder video/snhc/rockwell_vds2 View-dependent texture decoding with back channel video/natural/microsoftvtc-update Visual Texture decoder in C+ video/natural/microsoft-v2.5-040207-NTU Error resilience sca
37、lable decoder in C+ Amendment 5:2006 toCAN/CSA-ISO/IEC 14496-5:06ISO/IEC 14496-5:2001/Amd.5:2004(E) 2 ISO/IEC 2004 All rights reservedReplace A.2 with: A.2 Visual encoding software Location Content video/natural/MoMuSys -1.0-001220_sony Natural video encoder in C video/natural/microsoft -2.3-001213
38、Natural video encoder in C+ video/snhc/FBA_V2 Face and body animation encoder by EPFL video/snhc/m3d20010209 3D mesh encoder integrated by Samsung video/snhc/DCT DCT-based FAP encoder video/snhc/FIT FIT encodervideo/snhc/fit_liu FIT encodervideo/snhc/IST/codec FAP encoder video/snhc/Mesh2D Dynamic 2
39、D mesh geometry and motion encoding video/snhc/rockwell_epfl_v18 FAP encoder video/snhc/rockwell_vds2 View-dependent texture encoding with back channel video/natural/microsoftvtc-update Visual Texture encoder in C+ video/natural/microsoft-v2.5-040207-NTU Error resilience scalable encoder in C+ Amend
40、ment 5:2006 toCAN/CSA-ISO/IEC 14496-5:06ISO/IEC 14496-5:2001/Amd.5:2004(E) ICS 35.040 ISO/IEC 2004 All rights reserved Copyright Notice This Amendment to the International Standard contains information copyright protected by the International Organization for Standardization (ISO) and the Internatio
41、nal Electrotechnical Commission (IEC). Except as permitted under the laws of Canada, no extract of this Amendment to the International Standard may be reproduced, stored in any retrieval system, or transmitted in any form or by any means, electronic, photocopying, recording, or otherwise, without pr
42、ior permission from the Stan dards Council of Canada (SCC). Requests for permission to reproduce this Amendment to the International Standard or parts thereof should be addressed to Manager, Technical Document Centre Standards Council of Canada 270 Albert Street, Suite 200 Ottawa, Ontario K1P 6N7 Th
43、e Canadian adoption of this Amendment to the International Standard contains information copyright protected by the Canadian Standards Association. All rights reserved. No part of this adopted Amendment may be reproduced in any form whatsoever without the prior permission of the publisher. ISO/IEC m
44、aterial is reprinted with permission. Requests for permission to reproduce this adopted Amendment or parts thereof should be addressed to Director, Information Products Canadian Standards Association 5060 Spectrum Way, Suite 100 Mississauga, Ontario L4W 5N6 Copyright violators will be prosecuted to the full extent of the law. PRINTEDIN CANADAIMPRIMEAU CANADA
