1、 INTERNATIONAL STANDARD ISO/IEC14543-3-3First edition2007-01Information technology Home electronic system (HES) architecture Part 3-3: User process for network based control of HES Class 1 Reference number ISO/IEC 14543-3-3:2007(E) International Organization for Standardization (ISO), 2007. All righ
2、ts reserved. International Electrotechnical Commission (IEC), 2007. All rights reserved. NOT FOR RESALE.National Standard of CanadaCAN/CSA-ISO/IEC 14543-3-3:07(ISO/IEC 14543-3-3:2007)International Standard ISO/IEC 14543-3-3:2007 (first edition, 2007-01) has been adopted withoutmodification (IDT) as
3、CSA Standard CAN/CSA-ISO/IEC 14543-3-3:07, which has been approved as a NationalStandard of Canada by the Standards Council of Canada.ISBN 978-1-55436-586-9 November 2007Legal Notice for StandardsCanadian Standards Association (CSA) standards are developed through a consensus standards development p
4、rocess approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA administers the process and establishes rules to promote fairness in achieving consensus, it does not ind
5、ependently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documen
6、ts fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA makes no representations or warranties reg
7、arding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXP
8、ENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RES
9、ULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professional or other services for or on behalf of any per
10、son or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no responsibility whatsoever arising in any way from any a
11、nd all use of or reliance on the information contained in this document. CSA is a private not-for-profit company that publishes voluntary standards and related documents. CSA has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes
12、. Intellectual property rights and ownershipAs between CSA and the users of this document (whether it be in printed or electronic form), CSA is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the cont
13、rary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws
14、 that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves all intellectual property rights in this document.Patent right
15、sAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent r
16、ights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:.load this document onto a computer
17、for the sole purpose of reviewing it;.search and browse this document; and.print this document. Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA to have such copies, and only if this Legal Notice appears on each such copy.In addition
18、, users may not and may not permit others to.alter this document in any way or remove this Legal Notice from the attached standard;.sell this document without authorization from CSA; or.make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in thi
19、s Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.The Canadian Standards Asso
20、ciation (CSA),under whose auspices this National Standard has been produced, was chartered in 1919 and accredited by the Standards Council of Canada to the National Standards system in 1973. It is a not-for-profit, nonstatutory, voluntary membership association engaged in standards development and c
21、ertification activities. CSA standards reflect a national consensus of producers and users including manufacturers, consumers, retailers, unions and professional organizations, and governmental agencies. The standards are used widely by industry and commerce and often adopted by municipal, provincia
22、l, and federal governments in their regulations, particularly in the fields of health, safety, building and construction, and the environment. Individuals, companies, and associations across Canada indicate their support for CSAs standards development by volunteering their time and skills to CSA Com
23、mittee work and supporting the Associations objectives through sustaining memberships. The more than 7000 committee volunteers and the 2000 sustaining memberships together form CSAs total membership from which its Directors are chosen. Sustaining memberships represent a major source of income for CS
24、As standards development activities. The Association offers certification and testing services in support of and as an extension to its standards development activities. To ensure the integrity of its certification process, the Association regularly and continually audits and inspects products that
25、bear the CSA Mark. In addition to its head office and laboratory complex in Toronto, CSA has regional branch offices in major centres across Canada and inspection and testing agencies in eight countries. Since 1919, the Association has developed the necessary expertise to meet its corporate mission:
26、 CSA is an independent service organization whose mission is to provide an open and effective forum for activities facilitating the exchange of goods and services through the use of standards, certification and related services to meet national and international needs.For further information on CSA
27、services, write toCanadian Standards Association5060 Spectrum Way, Suite 100Mississauga, Ontario, L4W 5N6CanadaThe Standards Council of Canada (SCC) is thecoordinating body of the National StandardsSystem, a coalition of independent, autonomousorganizations working towards the furtherdevelopment and
28、 improvement of voluntarystandardization in the national interest.The principal objects of the SCC are to fosterand promote voluntary standardization as a meansof advancing the national economy, benefiting thehealth, safety, and welfare of the public, assistingand protecting the consumer, facilitati
29、ng domesticand international trade, and furthering internationalcooperation in the field of standards.A National Standard of Canada (NSC) is a standardprepared or reviewed by an accredited Standards Development Organization (SDO) and approved by the SCC according to the requirements of CAN-P-2. Appr
30、oval does not refer to the technical content of the standard; this remains the continuing responsibility of the SDO. An NSC reflects a consensus of a number of capable individuals whose collective interests provide, to the greatest practicable extent, a balance of representation of general interests
31、, producers, regulators, users (including consumers), and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard which is capable of making a significant and timely contribution to the national interest.Those who have a need to apply standards areenco
32、uraged to use NSCs. These standards are subjectto periodic review. Users of NSCs are cautionedto obtain the latest edition from the SDO which publishes the standard.The responsibility for approving standards as National Standards of Canada rests with theStandards Council of Canada270 Albert Street,
33、Suite 200Ottawa, Ontario, K1P 6N7CanadaAlthough the intended primary application of this Standard is stated in its Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.Registered trade-mark of Canadian Standards Associati
34、onCette norme est offerte en anglais seulement pour le moment. La CSA publiera la version enfranais ds quelle sera produite par lorganisme rdacteur.National Standard of CanadaPublished in November 2007 by Canadian Standards AssociationA not-for-profit private sector organization5060 Spectrum Way, Su
35、ite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at www.ShopCSA.caCAN/CSA-ISO/IEC 14543-3-3:07Information technology Home electronic system (HES) architecture Part 3-3: User process for network based control of HESClass 1Prepared byInternational Organiza
36、tion for Standardization/ International Electrotechnical CommissionRegistered trade-mark of Canadian Standards AssociationReviewed byApproved byStandards Council of CanadaCAN/CSA-ISO/IEC 14543-3-3:07Information technology Home electronic system(HES) architecture Part 3-3: User process fornetwork bas
37、ed control of HES Class 1November 2007 Canadian Standards Association CSA/3CAN/CSA-ISO/IEC 14543-3-3:07Information technology Home electronic system (HES) architecture Part 3-3: User process for network based control of HESClass 1CSA PrefaceStandards development within the Information Technology sec
38、tor is harmonized with international standards development. Through the CSA Technical Committee on Information Technology (TCIT), Canadians serve as the Canadian Advisory Committee (CAC) on ISO/IEC Joint Technical Committee 1 on Information Technology (ISO/IEC JTC1) for the Standards Council of Cana
39、da (SCC), the ISO member body for Canada and sponsor of the Canadian National Committee of the IEC. Also, as a member of the International Telecommunication Union (ITU), Canada participates in the International Telegraph and Telephone Consultative Committee (ITU-T).At the time of publication, ISO/IE
40、C 14543-3-3:2007 is available from ISO and IEC in English only. CSA will publish the French version when it becomes available from ISO and IEC.This International Standard was reviewed by the CSA TCIT under the jurisdiction of the Strategic Steering Committee on Information Technology and deemed acce
41、ptable for use in Canada. From time to time, ISO/IEC may publish addenda, corrigenda, etc. The CSA TCIT will review these documents for approval and publication. For a listing, refer to the CSA Information Products catalogue or CSA Info Update or contact a CSA Sales representative. This Standard has
42、 been formally approved, without modification, by the Technical Committee and has been approved as a National Standard of Canada by the Standards Council of Canada.November 2007 Canadian Standards Association 2007All rights reserved. No part of this publication may be reproduced in any form whatsoev
43、er without the prior permission ofthe publisher. ISO/IEC material is reprinted with permission. Where the words “this International Standard” appear in the text, they should be interpreted as “this National Standard of Canada”.Inquiries regarding this National Standard of Canada should be addressed
44、toCanadian Standards Association5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4000www.csa.caTo purchase CSA Standards and related publications, visit CSAs Online Store at www.ShopCSA.ca or call toll-free 1-800-463-6727 or 416-747-4044.INTERNATIONAL STANDARD
45、 ISO/IEC14543-3-3First edition2007-01Information technology Home electronic system (HES) architecture Part 3-3: User process for network based control of HES Class 1 PRICE CODE Copyright 2007 ISO/IEC, Geneva All rights reserved No part of this publication may be reproduced or utilized in any form or
46、 by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission, 3, rue de Varemb, PO Box 131, CH-1211 Geneva 20, Switzerland Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmai
47、liec.ch Web: www.iec.ch G For price, see current catalogue 2 14543-3-3 ISO/IEC:2007(E) CONTENTS FOREWORD.4 INTRODUCTION.5 1 Scope.7 2 Normative references7 3 Terms, definitions and abbreviations .7 3.1 Terms and definitions 7 3.2 Abbreviations.7 4 Conformance7 5 Object models 8 6 Group object server
48、 8 6.1 Overview .8 6.2 General data structure group objects .9 6.2.1 Structure9 6.2.2 Group object description 9 6.2.3 Communication flags .10 6.2.4 Group object value.11 6.3 Group object value transfers11 6.3.1 Overview of group object value transfers11 6.3.2 Reading the group object value 12 6.3.3
49、 Receiving a request to read the group object value.12 6.3.4 Writing the group object value13 6.3.5 Receiving an update of the group object value13 7 Interface object server 13 7.1 Overview .13 7.2 Address levels for interface objects15 7.3 Interworking requirements for interface objects 15 7.4 System interface objects (management objects).15 7.5 Application interface objects 15 7.5.1 General .15 7.5.2 Property server for own application interface objects 15 7.5.3 Property client for accessing remote application interface objects.16
