1、 National Standard of CanadaCAN/CSA-ISO/IEC 16500-5:02(ISO/IEC 16500-5:1999)International Standard ISO/IEC 16500-5:1999 (first edition, 1999-12-15), has been adopted withoutmodification (IDT) as CSA Standard CAN/CSA-ISO/IEC 16500-5:02, which has been approved as a NationalStandard of Canada by the S
2、tandards Council of Canada.ISBN 1-55324-708-6 March 2002Information technology Generic digitalaudio-visual systems Part 5:High and mid-layer protocolsTechnologies de linformation Systmes audiovisuels numriquesgnriques Partie 5: Protocoles de la couche haute et moyenneReference numberISO/IEC 16500-5:
3、1999(E) ISO/IEC 1999The Canadian Standards Association (CSA), The Standards Council of Canada is theunder whose auspices this National Standard has been coordinating body of the National Standards system, produced, was chartered in 1919 and accredited by a federation of independent, autonomousthe St
4、andards Council of Canada to the National organizations working towards the furtherStandards system in 1973. It is a not-for-profit, development and improvement of voluntarynonstatutory, voluntary membership association standardization in the national interest.engaged in standards development and ce
5、rtification The principal objects of the Council are to foster activities. and promote voluntary standardization as a means CSA standards reflect a national consensus of of advancing the national economy, benefiting theproducers and users including manufacturers, health, safety, and welfare of the p
6、ublic, assisting consumers, retailers, unions and professional and protecting the consumer, facilitating domestic organizations, and governmental agencies. The and international trade, and furthering internationalstandards are used widely by industry and commerce cooperation in the field of standard
7、s.and often adopted by municipal, provincial, and A National Standard of Canada is a standard whichfederal governments in their regulations, particularly in has been approved by the Standards Council ofthe fields of health, safety, building and construction, Canada and one which reflects a reasonabl
8、eand the environment. agreement among the views of a number of capableIndividuals, companies, and associations across individuals whose collective interests provide to theCanada indicate their support for CSAs standards greatest practicable extent a balance ofdevelopment by volunteering their time a
9、nd skills to representation of producers, users, consumers, andCSA Committee work and supporting the Associations others with relevant interests, as may be appropriateobjectives through sustaining memberships. The more to the subject in hand. It normally is a standardthan 7000 committee volunteers a
10、nd the 2000 which is capable of making a significant and timelysustaining memberships together form CSAs total contribution to the national interest.membership from which its Directors are chosen. Approval of a standard as a National Standard ofSustaining memberships represent a major source of Cana
11、da indicates that a standard conforms to theincome for CSAs standards development activities. criteria and procedures established by the StandardsThe Association offers certification and testing Council of Canada. Approval does not refer to theservices in support of and as an extension to its techni
12、cal content of the standard; this remains thestandards development activities. To ensure the continuing responsibility of the accreditedintegrity of its certification process, the Association standards-development organization.regularly and continually audits and inspects products Those who have a n
13、eed to apply standards arethat bear the CSA Mark. encouraged to use National Standards of CanadaIn addition to its head office and laboratory complex whenever practicable. These standards are subject in Toronto, CSA has regional branch offices in major to periodic review; therefore, users are cautio
14、ned centres across Canada and inspection and testing to obtain the latest edition from the organizationagencies in eight countries. Since 1919, the preparing the standard.Association has developed the necessary expertise to The responsibility for approving National Standards meet its corporate missi
15、on: CSA is an independent of Canada rests with theservice organization whose mission is to provide an Standards Council of Canadaopen and effective forum for activities facilitating the 270 Albert Street, Suite 200exchange of goods and services through the use of Ottawa, Ontario, K1P 6N7standards, c
16、ertification and related services to meet Canadanational and international needs.For further information on CSA services, write toCanadian Standards Association178 Rexdale BoulevardToronto, Ontario, M9W 1R3CanadaAlthough the intended primary application of this Standard is stated in its Scope, it is
17、 importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.Registered trade-mark of Canadian Standards AssociationInformation technology Generic digital audio-visualCAN/CSA-ISO/IEC 16500-5:02 systems Part 5: High and mid-layer protocols Ma
18、rch 2002 Canadian Standards Association CSA/1CAN/CSA-ISO/IEC 16500-5:02Information technology Genericdigital audio-visual systems Part 5: High and mid-layer protocolsCSA PrefaceStandards development within the Information Technology sector is harmonized with international standardsdevelopment. Throu
19、gh the CSA Technical Committee on Information Technology (TCIT), Canadians serve asthe Canadian Advisory Committee (CAC) on ISO/IEC Joint Technical Committee 1 on Information Technology(ISO/IEC JTC1) for the Standards Council of Canada (SCC), the ISO member body for Canada and sponsor ofthe Canadian
20、 National Committee of the IEC. Also, as a member of the International TelecommunicationUnion (ITU), Canada participates in the International Telegraph and Telephone Consultative Committee(ITU-T).This International Standard was reviewed by the CSA TCIT under the jurisdiction of the Strategic Steerin
21、gCommittee on Information Technology and deemed acceptable for use in Canada. (A committee membershiplist is available on request from the CSA Project Manager.) From time to time, ISO/IEC may publish addenda,corrigenda, etc. The CSA TCIT will review these documents for approval and publication. For
22、a listing, refer tothe CSA Information Products catalogue or CSA Info Update or contact a CSA Sales representative. ThisStandard has been formally approved, without modification, by these Committees and has been approved as aNational Standard of Canada by the Standards Council of Canada.March 2002 C
23、anadian Standards Association 2002All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of thepublisher. ISO/IEC material is reprinted with permission. Where the words “this International Standard” appear in the text, theyshould be int
24、erpreted as “this National Standard of Canada”. Inquiries regarding this National Standard of Canada should be addressed to Canadian Standards Association 178 Rexdale Boulevard, Toronto, Ontario, Canada M9W 1R31-800-463-6727 416-747-4044www.csa.caReference numberISO/IEC 16500-5:1999(E)ISO/IEC 1999IN
25、TERNATIONALSTANDARDISO/IEC16500-5First edition1999-12-15Information technology Generic digitalaudio-visual systems Part 5:High and mid-layer protocolsTechnologies de linformation Systmes audiovisuels numriquesgnriques Partie 5: Protocoles de la couche haute et moyenneISO/IEC 16500-5:1999(E)PDF discl
26、aimerThis PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall notbe edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading thisfile, parties acce
27、pt therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in thisarea.Adobe is a trademark of Adobe Systems Incorporated.Details of the software products used to create this PDF file can be found in the General Info relative to the file
28、; the PDF-creation parameterswere optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely eventthat a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO/IEC 1999All rights
29、reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronicor mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member bodyin the country of the requ
30、ester.ISO copyright officeCase postale 56 Gb7 CH-1211 Geneva 20Tel. + 41 22 749 01 11Fax + 41 22 734 10 79E-mail copyrightiso.chWeb www.iso.chii ISO/IEC 1999 All rights reservedISO/IEC 16500-5:1999(E) ISO/IEC 1999 - All rights reserved DAVIC 1.3.1a Part 7 (1999) iiiContents PageForeword . viiIntrodu
31、ction . viii1. Scope . 12. Normative references 13. Definitions. 44. Acronyms and abbreviations 75. Conventions 86. S1 flow: high and mid layer protocols . 86.1 S1 flow description.86.2 Overview of protocol stacks.86.3 Description of specific protocols106.3.1 MPEG-2 Packetized Elementary Stream (PES
32、) 106.3.2 MPEG-2 Private Section .106.3.3 DSM-CC Private Section 106.3.4 MPEG Elementary Streams.106.3.5 Real time uncompressed graphics streams 106.3.6 Real time compressed graphics streams 106.3.7 Stored monomedia streams .106.3.8 Stand-alone monomedia components116.3.9 Other data116.3.10 MPEG-2 P
33、rogram Specific Information116.3.11 MPEG-2 Transport Stream (TS) .116.3.12 ATM Adaptation Layer 5 (AAL5)147. S2 flow: high and mid layer protocols . 157.1 S2 flow description.157.2 Overview of protocol stacks.157.2.1 Download control157.2.2 User-User interaction 167.3 Description of specific protoco
34、ls177.3.1 DSM-CC option choices summary177.3.2 Remote Procedure Call187.3.3 Download 187.3.4 User-User interaction 187.3.5 Service Gateway functions197.3.6 Application service functions217.3.7 Access control .217.3.8 Stream service functions .217.3.9 File service functions 227.3.10 Data base service
35、 functions.22ISO/IEC 16500-5:1999(E)iv DAVIC 1.3.1a Part 7 (1999) ISO/IEC 1999 - All rights reserved7.3.11 Use of the DSM-CC User-to-User interface in the DAVIC distribution profile.227.3.12 Application note: Use of ISO/IEC 16500 for karaoke (high-layer protocol aspects)227.3.13 Application note: ne
36、twork congestion control for enhanced broadcast 237.3.14 A10 content transfer interface .247.4 Distributed Server API. 257.4.1 Member interface 257.4.2 Group interface267.4.3 Domain Interface.278. S3 flow: high and mid-layer protocols. 288.1 S3 flow description 288.2 Session control . 288.2.1 Overvi
37、ew of protocol stacks298.2.2 Description of specific protocols.298.2.3 DSM-CC U-N resource descriptor usage348.2.4 DAVIC-defined resource descriptors368.2.5 Operations to cope with rainy day scenarios.368.3 STU configuration 378.3.1 Overview of protocol stacks378.3.2 Description of specific protocol
38、s.378.4 Interface initialization (DIIP). 388.4.1 Overview of protocol stacks388.4.2 Description of specific protocols.388.4.3 DIIP transaction state machine428.5 Network state machine. 438.6 Switched video broadcasting channel change 438.6.1 Overview of protocol stacks448.6.2 CCP message sequence .4
39、48.6.3 CCP message structure448.6.4 The usage of ProgramSelect message parameters.468.6.5 DavicSvbNetworkResourceDescriptor definition .478.7 Network-initiated channel changing 488.7.1 Message header .488.7.2 Message body Syntax488.7.3 Parameters .499. S4 flow: high and mid layer protocols . 499.1 S
40、4 flow description 499.2 Overview of protocol stacks. 499.3 Description of specific protocols . 509.3.1 Call/connection control protocol .509.3.2 S-AAL protocol.5610. S5 flow: high and mid layer protocols . 5610.1 S5 flow description 56ISO/IEC 16500-5:1999(E) ISO/IEC 1999 - All rights reserved DAVIC
41、 1.3.1a Part 7 (1999) v10.2 Overview of protocols stacks .5710.2.1 Upper layer protocol stacks for management interface.5710.2.2 Lower layer protocol for management interface .5710.3 Management information flow .5810.4 Transport layer and network layer protocols5910.4.1 Transport layer protocols 591
42、0.4.2 Network layer protocols6010.5 Management Information Bases.6010.5.1 STU MIB.6010.5.2 Server MIB6110.5.3 Delivery system elements6110.6 Element capability profiles.6110.6.1 STU Profile .6111. Common protocols. 6111.1 TCP.6111.2 UDP 6111.3 IP.6111.3.1 IP over ATM .6211.4 ATM Adaptation Layer Typ
43、e 56211.5 ATM layer specifications .6211.5.1 Reserved VPI/VCI values for uni-format cells .6211.5.2 Reserved VPI/VCI values for NNI-format cells .6211.5.3 Reserved VPI/VCI values for intra-network cells.6211.5.4 ATM Layer OAM .6411.5.5 Connection management functions for the non-ATM end-to-end case
44、6412. Connection Block Descriptors and initialization protocols for A0 . 6412.1 Connection Block Descriptors6412.2 A0 protocol stacks 6512.2.1 MPEG-2 TS downstream bus6512.2.2 Bi-directional cell bus .6612.2.3 Local control bus.6712.2.4 Optional analog pass-through bus (internal A0 only) .6812.3 STU
45、/NIU initialization messages .6812.3.1 Initialization functions.6812.3.2 STU initialization messages 7012.4 A0 Local CBD management.7412.4.1 Connection set-up7412.4.2 Connection release 7512.4.3 Local CBD messages 7512.5 Status and diagnostic functions 7812.5.1 Diagnostic primitives 78ISO/IEC 16500-
46、5:1999(E)vi DAVIC 1.3.1a Part 7 (1999) ISO/IEC 1999 - All rights reserved12.5.2 NIU table formats7812.5.3 STU table formats .8012.5.4 STU to NIU messages .8112.5.5 NIU-to-STU messages 8412.6 Logical parameter definitions 8713. STU dataport 8713.1 Protocol stacks for STU dataport . 8713.1.1 Protocol
47、stacks for the STU multimedia dataport MPEG based services.8813.1.2 Protocol stacks for the STU multimedia dataport IP based services 8813.2 Support of IP services over the STU multimedia dataport 8813.2.1 MTU size.8813.2.2 Encapsulation 8813.2.3 Address Resolution Protocol (ARP)9013.2.4 Link-fragme
48、ntation9113.2.5 IP unicast messages.9213.2.6 IP multicast and broadcast.92Annex A (normative) STU Management Information Base 93Annex B (normative) Server Management Information Base. 110Annex C (informative) A1-A0 Inter-working. 142Bibliography. 147ISO/IEC 16500-5:1999(E) ISO/IEC 1999 - All rights
49、reserved DAVIC 1.3.1a Part 7 (1999) viiForewordISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission)form the specialized system for worldwide standardization. National bodies that are members of ISO or IECparticipate in the development of International Standards through technical committees established by therespective organization to deal with particular fields of technical activity. ISO and IEC technical committeescollaborate in fields of mutual interest.
