1、 ISO/IEC 2014. CSA Group 2015. All rights reserved. Unauthorized reproduction is strictly prohibited.CAN/CSA-ISO/IEC 18000-7:15(ISO/IEC 18000-7:2014, IDT)National Standard of CanadaCAN/CSA-ISO/IEC 18000-7:15Information technology Radio frequency identification foritem management Part 7: Parameters f
2、or active airinterface communications at 433 MHz(ISO/IEC 18000-7:2014, IDT)Legal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approvedby the Standards Council of Canada. This process brings together
3、 volunteers representing varied viewpoints and interests to achieve consensusand develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it doesnot independently test, evaluate, or verify the content of standards.Disclaimer and
4、 exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation,implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-i
5、nfringementof any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the informationpublished in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicablestatute, rule,
6、or regulation.IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS,OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED,INCLUDING BUT NOT LIMITED TO SPECIAL OR
7、CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGEDDATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS,WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHERTHEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF
8、 CSA GROUPHAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of anyperson or entity or to perform any duty owed by any person or
9、 entity to another person or entity. The information in this document is directedto those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoeverarising in any way from any and all use of or reliance on the information contained
10、 in this document.CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does itundertake, to enforce compliance with the contents of the standards or other documents it publishes.Intellectual property rights and ownershipA
11、s between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorizedlicensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and allinventions and trade
12、 secrets that may be contained in this document, whether or not such inventions and trade secrets are protected bypatents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document mayviolate laws that protect CSA Groups and/or other
13、s intellectual property and may give rise to a right in CSA Group and/or others to seek legalredress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectualproperty rights in this document.Patent rightsAttention is drawn t
14、o the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not beheld responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity ofany such patent rights is entirely
15、 their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to doonly the following:If this document is in electronic form: load this document onto a computer for the sole
16、 purpose of reviewing it; search and browse this document; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group to have suchcopies, and only if this Legal Notice appears on each such c
17、opy.In addition, users may not and may not permit others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document without authorization from CSA Group; or make an electronic copy of this document.If you do not agree with any of the terms and condit
18、ions contained in this Legal Notice, you may not load or use this document or make anycopies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this documentconstitutes your acceptance of the terms and conditions of this Legal Notice.Standard
19、s Update ServiceCAN/CSA-ISO/IEC 18000-7:15December 2015Title: Information technology Radio frequency identification for item management Part 7: Parameters for active air interface communications at 433 MHzTo register for e-mail notification about any updates to this publication go to shop.csa.ca cli
20、ck on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2424088.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at www.csagroup.org/legal to find out how we protect yourpersonal inf
21、ormation.Canadian Standards Association (operating as “CSA Group”), underwhose auspices this National Standard has been produced, waschartered in 1919 and accredited by the Standards Council ofCanada to the National Standards system in 1973. It is a not-for-profit, nonstatutory, voluntary membership
22、 association engaged instandards development and certification activities.CSA Group standards reflect a national consensus of producers andusers including manufacturers, consumers, retailers, unions andprofessional organizations, and governmental agencies. Thestandards are used widely by industry an
23、d commerce and oftenadopted by municipal, provincial, and federal governments in theirregulations, particularly in the fields of health, safety, building andconstruction, and the environment.Individuals, companies, and associations across Canada indicatetheir support for CSA Groups standards develop
24、ment byvolunteering their time and skills to Committee work and supportingCSA Groups objectives through sustaining memberships. The morethan 7000 committee volunteers and the 2000 sustainingmemberships together form CSA Groups total membership fromwhich its Directors are chosen. Sustaining membershi
25、ps represent amajor source of income for CSA Groups standards developmentactivities.CSA Group offers certification and testing services in support of andas an extension to its standards development activities. To ensurethe integrity of its certification process, CSA Group regularly andcontinually au
26、dits and inspects products that bear theCSA Group Mark.In addition to its head office and laboratory complex in Toronto, CSAGroup has regional branch offices in major centres across Canadaand inspection and testing agencies in eight countries. Since 1919,CSA Group has developed the necessary experti
27、se to meet itscorporate mission: CSA Group is an independent serviceorganization whose mission is to provide an open and effectiveforum for activities facilitating the exchange of goods and servicesthrough the use of standards, certification and related services tomeet national and international nee
28、ds.For further information on CSA Group services, write toCSA Group178 Rexdale Boulevard,Toronto, Ontario, M9W 1R3CanadaA National Standard of Canada is a standard developed by an SCC-accredited Standards Development Organization (SDO), andapproved by the Standards Council of Canada (SCC), in accord
29、ancewith SCCs: Requirements and Guidance Accreditation forStandards Development Organizations, and Requirements andGuidance Approval of National Standards of Canada Designation.More information on National Standard requirements can be foundat www.scc.ca.An SCC-approved standard reflects the consensu
30、s of a number ofexperts whose collective interests provide, to the greatestpracticable extent, a balance of representation of affectedstakeholders. National Standards of Canada are intended to make asignificant and timely contribution to the Canadian interest.SCC is a Crown corporation within the po
31、rtfolio of Industry Canada.With the goal of enhancing Canadas economic competitiveness andsocial well-being, SCC leads and facilitates the development and useof national and international standards. SCC also coordinatesCanadian participation in standards development, and identifiesstrategies to adva
32、nce Canadian standardization efforts.Accreditation services are provided by SCC to various customers,including product certifiers, testing laboratories, and standardsdevelopment organizations. A list of SCC programs and accreditedbodies is publicly available at www.scc.ca.Users should always obtain
33、the latest edition of a National Standardof Canada from the standards development organization responsiblefor its publication, as these documents are subject to periodicreview.Standards Council of Canada600-55 Metcalfe StreetOttawa, Ontario, K1P 6L5CanadaCette Norme Nationale du Canada nest disponib
34、le quen anglais. Le Groupe CSA publiera la version en franais ds quelle sera produite parlorganisme rdacteur.Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility ofthe users to judge its suitability for their pa
35、rticular purpose.TMA trade-mark of the Canadian Standards Association, operating as “CSA Group”ICS 35.040ISBN 978-1-4883-0065-3 2015 CSA GroupAll rights reserved. No part of this publication may be reproduced in any form whatsoeverwithout the prior permission of the publisher.Published in December 2
36、015 by CSA GroupA not-for-profit private sector organization178 Rexdale Boulevard,Toronto, Ontario, Canada M9W 1R3To purchase standards and related publications, visit our Online Store at shop.csa.caor call toll-free 1-800-463-6727 or 416-747-4044.TMA trade-mar k of the Canadian S tandards Associati
37、on, operating as “CSA Group”Reviewed byPrepared byInternational Organization for Standardization/International Electrotechnical CommissionApproved byInformation technology Radio frequencyidentification for item management Part 7: Parameters for active air interfacecommunications at 433 MHz(ISO/IEC 1
38、8000-7:2014, IDT)CAN/CSA-ISO/IEC 18000-7:15National Standard of CanadaCAN/CSA-ISO/IEC 18000-7:15Information technology Radio frequency identification foritem management Part 7: Parameters for active airinterface communications at 433 MHzDecember 2015 2015 CSA GroupCSA/5CAN/CSA-ISO/IEC 18000-7:15Info
39、rmation technology Radio frequencyidentification for item management Part 7: Parameters for active air interfacecommunications at 433 MHz(ISO/IEC 18000-7:2014, IDT)CSA PrefaceStandards development within the Information Technology sector is harmonized with internationalstandards development. Through
40、 the CSA Technical Committee on Information Technology (TCIT),Canadians serve as the Canadian Advisory Committee (CAC) on ISO/IEC Joint Technical Committee 1 onInformation Technology (ISO/IEC JTC1) for the Standards Council of Canada (SCC), the ISO member bodyfor Canada and sponsor of the Canadian N
41、ational Committee of the IEC. Also, as a member of theInternational Telecommunication Union (ITU), Canada participates in the International Telegraph andTelephone Consultative Committee (ITU-T).For brevity, this Standard will be referred to as “CAN/CSA-ISO/IEC 18000-7” throughout.This Standard super
42、sedes CAN/CSA-ISO/IEC 18000-7-10 (adoption of ISO/IEC 18000-7:2009). At the timeof publication, ISO/IEC 18000-7:2014 is available from ISO and IEC in English only. CSA Group will publishthe French version when it becomes available from ISO and IEC.This International Standard was reviewed by the TCIT
43、 under the jurisdiction of the Strategic SteeringCommittee on Information Technology and deemed acceptable for use in Canada. From time to time,ISO/IEC may publish addenda, corrigenda, etc. The TCIT will review these documents for approval andpublication. For a listing, refer to the Current Standard
44、s Activities page at standardsactivities.csa.ca.This Standard has been formally approved, without modification, by the Technical Committee and hasbeen approved as a National Standard of Canada by the Standards Council of Canada. 2015 CSA GroupAll rights reserved. No part of this publication may be r
45、eproduced in any form whatsoever without theprior permission of the publisher. ISO/IEC material is reprinted with permission. Where the words “thisInternational Standard” appear in the text, they should be interpreted as “this National Standard ofCanada”.Inquiries regarding this National Standard of
46、 Canada should be addressed toCSA Group178 Rexdale Boulevard,Toronto, Ontario, Canada M9W 1R31-800-463-6727 416-747-4000http:/csa.caCAN/CSA-ISO/IEC 18000-7:15Information technology Radio frequency identification foritem management Part 7: Parameters for active airinterface communications at 433 MHzD
47、ecember 2015 2015 CSA GroupCSA/6To purchase standards and related publications, visit our Online Store at shop.csa.ca or call toll-free1-800-463-6727 or 416-747-4044.This Standard is subject to review five years from the date of publication, and suggestions for itsimprovement will be referred to the
48、 appropriate committee. To submit a proposal for change, pleasesend the following information to inquiriescsagroup.org and include “Proposal for change” in thesubject line:a) Standard designation (number);b) relevant clause, table, and/or figure number;c) wording of the proposed change; andd) ration
49、ale for the change.CSA Technical Committee on InformationTechnologyJ. MacFie Microsoft Canada,Ottawa, OntarioCategory: Producer InterestChairF. Coalliercole de technologie Suprieure (Universit duQubec) (TS),Montral, QubecCategory: General InterestVice-ChairS. Michell Maurya Software Inc.,Ottawa, OntarioCategory: General InterestVice-ChairO. Avellaneda Industry Canada,Ottawa, OntarioAssociateW. Badawy Intelliview Technologies Inc.,Calgary, AlbertaAssociateR. Balderston Canadian Banknote Company Limited,Ottawa, OntarioAss
