1、Information technology Radio fr equency identification device conformance test methods Part 6: Test methods for air interface communications at 860 MHz to 960MHzCAN/CSA-ISO/IEC TR 18047-6:13(ISO/IEC TR 18047-6:2011, IDT)National Standard of CanadaNOT FOR RESALE. / PUBLICATION NON DESTINE LA REVENTE.
2、Legal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consen
3、sus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representat
4、ions, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA Group
5、 does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS,
6、 SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST
7、OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
8、, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this
9、 document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA Group is a private not-for-profit c
10、ompany that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA Group and the users of this document (whe
11、ther it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whet
12、her or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA Groups and/or others intellectual property and may give rise to a righ
13、t in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of th
14、is standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of thi
15、s documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:sLOADTHISDOCUMENTONTOACOMPUTERFORTHESOLEPURPOSEOFREVIEWINGITsSEARCHANDBROWSETHISDOCUMENTANDsPR
16、INTTHISDOCUMENTIFITISIN0$ this remains the continuing responsibility of the SDO. An NSC reflects a consensus of a number of capable individuals whose collective interests provide, to the greatest practicable extent, a balance of representation of general interests, producers, regulators, users (incl
17、uding consumers), and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard which is capable of making a significant and timely contribution to the national interest.Those who have a need to apply standards areencouraged to use NSCs. These standards
18、are subjectto periodic review. Users of NSCs are cautionedto obtain the latest edition from the SDO which publishes the standard.The responsibility for approving standards as National Standards of Canada rests with theStandards Council of Canada270 Albert Street, Suite 200Ottawa, Ontario, K1P 6N7Can
19、adaAlthough the intended primary application of this Standard is stated in its Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.Registered trade-mark of Canadian Standards AssociationCette norme est offerte en anglais
20、 seulement pour le moment. Le Groupe CSA publiera la versionen franais ds quelle sera produite par lorganisme rdacteur.TMA trade-mark of the Canadian Standards Association, operating as “CSA Group”National Standard of CanadaPublished in January 2013 by CSA GroupA not-for-profit private sector organi
21、zation5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at shop.csa.caApproved byStandards Council of CanadaCAN/CSA-ISO/IEC TR 18047-6:13Information technology Radio frequency identification device conformance test methods Part 6: Tes
22、t methods for air interface communications at 860 MHz to 960MHzPrepared by InternationalOrganizationforStandardization/ International Electrotechnical CommissionReviewed byCAN/CSA-ISO/IEC TR 18047-6:13Information technology Radio frequency identificationdevice conformance test methods Part 6: Test m
23、ethodsfor air interface communications at 860 MHz to 960MHzCSA/4 2013 CSA Group January 2013CAN/CSA-ISO/IEC TR 18047-6:13Information technology Radio frequency identification device conformance test methods Part 6: Test methods for air interface communications at 860 MHz to 960MHzCSA PrefaceStandard
24、s development within the Information Technology sector is harmonized with international standards development. Through the CSA Technical Committee on Information Technology (TCIT), Canadians serve as the Canadian Advisory Committee (CAC) on ISO/IEC Joint Technical Committee 1 on Information Technolo
25、gy (ISO/IEC JTC1) for the Standards Council of Canada (SCC), the ISO member body for Canada and sponsor of the Canadian National Committee of the IEC. Also, as a member of the International Telecommunication Union (ITU), Canada participates in the International Telegraph and Telephone Consultative C
26、ommittee (ITU-T).This Standard supersedes CAN/CSA-ISO/IEC TR 18047-6-10 (adoption of ISO/IEC TR 18047-6:2008).At the time of publication, ISO/IEC TR 18047-6:2011 is available from ISO and IEC in English only. CSA Group will publish the French version when it becomes available from ISO and IEC.This I
27、nternational Standard was reviewed by the TCIT under the jurisdiction of the Strategic Steering Committee on Information Technology and deemed acceptable for use in Canada. From time to time, ISO/IEC may publish addenda, corrigenda, etc. The TCIT will review these documents for approval and publicat
28、ion. For a listing, refer to the Current Standards Activities page at standardsactivities.csa.ca. This Standard has been formally approved, without modification, by the Technical Committee and has been approved as a National Standard of Canada by the Standards Council of Canada. 2013 CSA GroupAll ri
29、ghts reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of thepublisher. ISO/IEC material is reprinted with permission. Where the words “this Technical Report” appear in the text, they should be interpreted as “this National Standard of Canada
30、”.Inquiries regarding this National Standard of Canada should be addressed toCSA Group5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4000http:/csa.caTo purchase standards and related publications, visit our Online Store at shop.csa.ca or call toll-free 1-800
31、-463-6727 or 416-747-4044.This Standard is subject to periodic review, and suggestions for its improvement will be referred to the appropriate committee. To submit a proposal for change, please send the following information to inquiriescsagroup.org and include “Proposal for change” in the subject l
32、ine:(a) Standard designation (number);(b) relevant clause, table, and/or figure number;(c) wording of the proposed change; and(d) rationale for the change.Reference numberISO/IEC TR 18047-6:2011(E)ISO/IEC 2011TECHNICAL REPORT ISO/IECTR18047-6Third edition2011-01-15Information technology Radio freque
33、ncy identification device conformance test methods Part 6: Test methods for air interface communications at 860 MHz to 960 MHz Technologies de linformation Mthodes dessai de conformit du dispositif didentification de radiofrquence Partie 6: Mthodes dessai pour des communications dune interface dair
34、860 MHz et jusqu 960 MHz ISO/IEC TR 18047-6:2011(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the compute
35、r performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create
36、this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Ce
37、ntral Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without perm
38、ission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org ii ISO/IEC 2011 All rights reservedCAN/CSA-ISO/IEC T
39、R 18047-6:13ISO/IEC TR 18047-6:2011(E) ISO/IEC 2011 All rights reserved iiiContents Page Foreword vi Introduction.vii 1 Scope1 2 Normative references2 3 Terms, definitions, symbols and abbreviated terms .2 3.1 Terms and definitions .2 3.2 Symbols2 3.3 Abbreviated terms.3 3.4 Default conditions appli
40、cable to the test methods 3 3.4.1 Test environment.3 3.4.2 Pre-conditioning3 3.4.3 Default tolerance .3 3.4.4 Noise floor at test location .3 3.4.5 Total measurement uncertainty.3 4 Setup of test equipment4 4.1 Setup of test equipment for interrogator tests.4 4.1.1 General .4 4.1.2 Sense antenna .4
41、4.1.3 Test apparatus and test circuits for ISO/IEC 18000-6 Type A and B interrogator 4 4.1.4 Test apparatus and test circuits for ISO/IEC 18000-6 Type C interrogator .5 4.2 Setup of test equipment for tag tests5 4.2.1 General .5 4.2.2 Test apparatus and test circuits for ISO/IEC 18000-6 Type A, B an
42、d D tags.6 4.2.3 Test apparatus and test circuits for ISO/IEC 18000-6 Type C tags 7 5 Conformance tests for ISO/IEC 18000-6 Type A 8 5.1 Functional tests of interrogator .8 5.1.1 Interrogator modulation test 8 5.1.2 Interrogator demodulation and turn around time 8 5.2 Functional tests of tag 9 5.2.1
43、 Tag demodulation and turn around time 9 5.2.2 Tag backscatter .10 5.2.3 Tag response time.11 5.2.4 Tag bit rate .12 5.2.5 Tag state storage time 12 6 Conformance tests for ISO/IEC 18000-6 Type B 13 6.1 Functional tests of interrogator .13 6.1.1 Interrogator modulation test 13 6.1.2 Interrogator dem
44、odulation and turn around time 14 6.2 Functional tests of tag 15 6.2.1 Tag demodulation and turn around time 15 6.2.2 Tag backscatter .16 6.2.3 Tag response time.17 6.2.4 Tag bit rate .17 6.2.5 Tag state storage time 18 7 Conformance tests for ISO/IEC 18000-6 Type C 19 7.1 Tag functional tests.19 7.
45、1.1 Tag Frequency range 19 7.1.2 Tag demodulation capability20 CAN/CSA-ISO/IEC TR 18047-6:13ISO/IEC TR 18047-6:2011(E) iv ISO/IEC 2011 All rights reserved7.1.3 Tag duty cycle. 21 7.1.4 Tag preamble. 23 7.1.5 Tag link frequency tolerance and variation . 24 7.1.6 Tag link timing T1 . 25 7.1.7 Tag link
46、 timing T2 . 26 7.1.8 Tag state diagram . 29 7.2 Interrogator functional tests 30 7.2.1 Interrogator data encoding 30 7.2.2 Interrogator RF envelope parameters 32 7.2.3 Interrogator RF power-up and power-down parameters 33 7.2.4 Interrogator preamble parameters 34 7.2.5 Interrogator link timing T2 .
47、 35 7.2.6 Interrogator link timing T3 . 36 7.2.7 Interrogator link timing T4 . 37 8 Conformance tests for ISO/IEC 18000-6 Type D 39 8.1 Functional tests of interrogator 39 8.1.1 Interrogator modulation test 39 8.1.2 Interrogator demodulation and data decoding 39 8.2 Functional tests of tag . 41 8.2.
48、1 Tag backscatter. 41 8.2.2 Data encoding . 42 8.2.3 Link bits . 43 8.2.4 Tag Timing Parameters 43 8.2.5 Tag bit rate. 45 8.2.6 Tag multi-page timing 45 8.2.7 Tag LBT 46 9 Conformance tests for ISO/IEC 18000-6 Battery Assisted Passive (BAP) Type C. 46 9.1 Tag functional tests 46 9.1.1 Battery assist
49、ed Passive tag persistence time test 46 10 Conformance tests for ISO/IEC 18000-6 Sensor support . 48 10.1 Tag functional tests 48 10.1.1 Simple sensor test 48 10.1.2 Full-function sensor test 49 Annex A (informative) Test measurement site 50 A.1 Test sites and general arrangements for measurements involving the use of radiated fields. 50
