1、 Reference numberISO/OECD 789-10:2006(E)ISO/OECD 2006INTERNATIONAL STANDARD ISO/OECD789-10First edition2006-07-01Agricultural tractors Test procedures Part 10: Hydraulic power at tractor/implement interface Tracteurs agricoles Modes opratoires dessai Partie 10: Puissance hydraulique disponible la li
2、aison tracteur/instrument National Standard of CanadaCAN/CSA-M789-10-07(ISO/OECD 789-10:2006)International Standard ISO/OECD 789-10:2006 (first edition, 2006-07-01) has been adopted withoutmodification (IDT) as CSA Standard CAN/CSA-M789-10-07, which has been approved as a National Standardof Canada
3、by the Standards Council of Canada.ISBN 978-1-55436-529-6 October 2007Legal Notice for StandardsCanadian Standards Association (CSA) standards are developed through a consensus standards development process approved by theStandards Council of Canada. This process brings together volunteers represent
4、ing varied viewpoints and interests to achieve consensusand develop a standard. Although CSA administers the process and establishes rules to promote fairness in achieving consensus, it doesnot independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis
5、 document is provided without any representations, warranties, or conditions of any kind, express or implied, including, withoutlimitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or itsnon-infringement of any third par
6、tys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of anyof the information published in this document. CSA makes no representations or warranties regarding this documents compliance withany applicable statute, rule, or regulation.IN NO EVENT SHALL CSA, IT
7、S VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES,DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES,HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS
8、INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT,TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO ORPOSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF S
9、UCH DAMAGES, INJURY, LOSS,COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professional or other services for or on behalf of anyperson or entity or to perform any duty owed by any person or entity to another person or entity. The information in t
10、his document isdirected to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no responsibilitywhatsoever arising in any way from any and all use of or reliance on the information contained in this document.CSA is a private not-for-profit company that
11、publishes voluntary standards and related documents. CSA has no power, nor does itundertake, to enforce compliance with the contents of the standards or other documents it publishes.Intellectual property rights and ownershipAs between CSA and the users of this document (whether it be in printed or e
12、lectronic form), CSA is the owner, or the authorizedlicensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), andall inventions and trade secrets that may be contained in this document, whether or not such inventions and tra
13、de secrets are protectedby patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this documentmay violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or others to seek legalredres
14、s for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves all intellectualproperty rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA sha
15、ll not be heldresponsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity ofany such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA for information
16、al and non-commercial use only. The user of this document is authorized to doonly the following:If this document is in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document.Limited copies of this document in
17、 print or paper form may be distributed only to persons who are authorized by CSA to have suchcopies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Notice from the attached standard;
18、.sell this document without authorization from CSA; or.make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document ormake any copies of the contents hereof, and if you do make such copies, you
19、 are required to destroy them immediately. Use of thisdocument constitutes your acceptance of the terms and conditions of this Legal Notice.The Canadian Standards Association (CSA),under whose auspices this National Standard has been produced, was chartered in 1919 and accredited by the Standards Co
20、uncil of Canada to the National Standards system in 1973. It is a not-for-profit, nonstatutory, voluntary membership association engaged in standards development and certification activities. CSA standards reflect a national consensus of producers and users including manufacturers, consumers, retail
21、ers, unions and professional organizations, and governmental agencies. The standards are used widely by industry and commerce and often adopted by municipal, provincial, and federal governments in their regulations, particularly in the fields of health, safety, building and construction, and the env
22、ironment. Individuals, companies, and associations across Canada indicate their support for CSAs standards development by volunteering their time and skills to CSA Committee work and supporting the Associations objectives through sustaining memberships. The more than 7000 committee volunteers and th
23、e 2000 sustaining memberships together form CSAs total membership from which its Directors are chosen. Sustaining memberships represent a major source of income for CSAs standards development activities. The Association offers certification and testing services in support of and as an extension to i
24、ts standards development activities. To ensure the integrity of its certification process, the Association regularly and continually audits and inspects products that bear the CSA Mark. In addition to its head office and laboratory complex in Toronto, CSA has regional branch offices in major centres
25、 across Canada and inspection and testing agencies in eight countries. Since 1919, the Association has developed the necessary expertise to meet its corporate mission: CSA is an independent service organization whose mission is to provide an open and effective forum for activities facilitating the e
26、xchange of goods and services through the use of standards, certification and related services to meet national and international needs.For further information on CSA services, write toCanadian Standards Association5060 Spectrum Way, Suite 100Mississauga, Ontario, L4W 5N6CanadaThe Standards Council
27、of Canada (SCC) is thecoordinating body of the National StandardsSystem, a coalition of independent, autonomousorganizations working towards the furtherdevelopment and improvement of voluntarystandardization in the national interest.The principal objects of the SCC are to fosterand promote voluntary
28、 standardization as a meansof advancing the national economy, benefiting thehealth, safety, and welfare of the public, assistingand protecting the consumer, facilitating domesticand international trade, and furthering internationalcooperation in the field of standards.A National Standard of Canada (
29、NSC) is a standardprepared or reviewed by an accredited Standards Development Organization (SDO) and approved by the SCC according to the requirements of CAN-P-2. Approval does not refer to the technical content of the standard; this remains the continuing responsibility of the SDO. An NSC reflects
30、a consensus of a number of capable individuals whose collective interests provide, to the greatest practicable extent, a balance of representation of general interests, producers, regulators, users (including consumers), and others with relevant interests, as may be appropriate to the subject in han
31、d. It normally is a standard which is capable of making a significant and timely contribution to the national interest.Those who have a need to apply standards areencouraged to use NSCs. These standards are subjectto periodic review. Users of NSCs are cautionedto obtain the latest edition from the S
32、DO which publishes the standard.The responsibility for approving standards as National Standards of Canada rests with theStandards Council of Canada270 Albert Street, Suite 200Ottawa, Ontario, K1P 6N7CanadaAlthough the intended primary application of this Standard is stated in its Scope, it is impor
33、tantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.Registered trade-mark of Canadian Standards AssociationCette norme est offerte en anglais seulement pour le moment. La CSA publiera la version enfranais ds quelle sera produite par lorga
34、nisme rdacteur.National Standard of CanadaPublished in October 2007 by Canadian Standards AssociationA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at www.ShopCSA.caCAN/CSA-M789-10-07Agri
35、cultural tractors Test procedures Part 10: Hydraulic power at tractor/implement interfacePrepared byInternational Organization for StandardizationandOrganisation for Economic Cooperation and DevelopmentRegistered trade-mark of Canadian Standards AssociationReviewed byApproved byStandards Council of
36、CanadaCAN/CSA-M789-10-07Agricultural tractors Test procedures Part 10:Hydraulic power at tractor/implement interfaceOctober 2007 Canadian Standards Association CSA/3CAN/CSA-M789-10-07Agricultural tractors Test procedures Part 10: Hydraulic power at tractor/implement interfaceCSA PrefaceThis is the s
37、econd edition of CAN/CSA-M789-10, Agricultural tractors Test procedures Part 10: Hydraulic power at tractor/implement interface, which is an adoption without modification of the identically titled ISO/OECD (International Organization for Standardization/Organisation for Economic Cooperation and Deve
38、lopment) Standard 789-10 (first edition, 2006-07-01). This CSA Standard supersedes the previous edition published in 1997 as CAN/CSA-M789.10 (adopted ISO 789-10:1996). The ISO/OECD Standard, developed by ISO/TC 23, cancels and replaces ISO 789-10:1996 and is the first edition published by ISO in co-
39、operation with the OECD. At the time of publication, ISO/OECD 789-10:2006 is available from ISO and the OECD in English only. CSA will publish the French version when it becomes available from ISO and the OECD.This Standard was reviewed for Canadian adoption by the CSA Technical Committee on Agricul
40、tural Machinery, under the jurisdiction of the Strategic Steering Committee on Occupational Health and Safety, and has been formally approved by the Technical Committee. This Standard has been approved as a National Standard of Canada by the Standards Council of Canada.October 2007 Canadian Standard
41、s Association 2007All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission ofthe publisher. ISO/OECD material is reprinted with permission. Where the words “this International Standard” appear in the text, they should be interpreted as “t
42、his National Standard of Canada”.Inquiries regarding this National Standard of Canada should be addressed toCanadian Standards Association5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4000www.csa.caTo purchase CSA Standards and related publications, visit C
43、SAs Online Store at www.ShopCSA.ca or call toll-free 1-800-463-6727 or 416-747-4044.CSA gratefully acknowledges the support ofReference numberISO/OECD 789-10:2006(E)ISO/OECD 2006INTERNATIONAL STANDARD ISO/OECD789-10First edition2006-07-01Agricultural tractors Test procedures Part 10: Hydraulic power
44、 at tractor/implement interface Tracteurs agricoles Modes opratoires dessai Partie 10: Puissance hydraulique disponible la liaison tracteur/instrument ISO/OECD 789-10:2006(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be pri
45、nted or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no l
46、iability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file i
47、s suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO/OECD 2006 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any for
48、m or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO or OECD at the respective address below. ISO copyright office Editorial and Rights, OECD Publishing Case postale 56 CH-1211 Geneva 20 Rue Andr Pascal 2 F-75775 Paris Cedex
49、 16 Tel. + 41 22 749 01 11 Tel. + 33 1 45 24 82 00 Fax + 41 22 749 09 47 Fax + 33 1 45 24 13 91 E-mail copyrightiso.org E-mail rightsoecd.org Web www.iso.org Web www.oecd.org ii ISO/OECD 2006 All rights reservedCAN/CSA-M789-10-07ISO/OECD 789-10:2006(E) ISO/OECD 2006 All rights reserved iiiContents Page Foreword iv 1 Scope . 1 2 Normative references . 1 3 Terms and definitions. 1 4 Measurement units and tolerances. 3 5 General requirements. 3 5.1 Specification 3 5.2 Running-in and preliminary adjustments. 3
