1、 ISO 2006. CSA Group 2015. All rights reserved. Unauthorized reproduction is strictly prohibited.CAN/CSA-Z10535.1:15(ISO 10535:2006, MOD)National Standard of CanadaCAN/CSA-Z10535.1:15 Hoists for the transfer of disabled persons Requirements and test methods (ISO 10535:2006, MOD)Legal Notice for Stan
2、dardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a sta
3、ndard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or
4、conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA Group does not warrant the
5、 accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation.IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFI
6、LIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR AN
7、Y OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS,
8、 OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed
9、to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document.CSA Group is a private not-for-profit company that publishes v
10、oluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes.Intellectual property rights and ownershipAs between CSA Group and the users of this document (whether it be in printed or
11、 electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventio
12、ns and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA Groups and/or others intellectual property and may give rise to a right in CSA Group and/or ot
13、hers to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the s
14、ubject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document
15、is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form: load this document onto a computer for the sole purpose of reviewing it; search and browse this document; and print t
16、his document if it is in PDF format.Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group to have such copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to alter thi
17、s document in any way or remove this Legal Notice from the attached standard; sell this document without authorization from CSA Group; or make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this doc
18、ument or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.Standards Update ServiceCAN/CSA-Z10535.1:15December 2015Title: Hoists for t
19、he transfer of disabled persons Requirements and test methodsTo register for e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2423981.If you require assistance, please
20、e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at www.csagroup.org/legal to find out how we protect your personal information.Canadian Standards Association (operating as “CSA Group”), under whose auspices this National Standard has been produced, was chartere
21、d in 1919 and accredited by the Standards Council of Canada to the National Standards system in 1973. It is a not-for- profit, nonstatutory, voluntary membership association engaged in standards development and certification activities. CSA Group standards reflect a national consensus of producers a
22、nd users including manufacturers, consumers, retailers, unions and professional organizations, and governmental agencies. The standards are used widely by industry and commerce and often adopted by municipal, provincial, and federal governments in their regulations, particularly in the fields of hea
23、lth, safety, building and construction, and the environment. Individuals, companies, and associations across Canada indicate their support for CSA Groups standards development by volunteering their time and skills to Committee work and supporting CSA Groups objectives through sustaining memberships.
24、 The more than 7000 committee volunteers and the 2000 sustaining memberships together form CSA Groups total membership from which its Directors are chosen. Sustaining memberships represent a major source of income for CSA Groups standards development activities. CSA Group offers certification and te
25、sting services in support of and as an extension to its standards development activities. To ensure the integrity of its certification process, CSA Group regularly and continually audits and inspects products that bear the CSA Group Mark. In addition to its head office and laboratory complex in Toro
26、nto, CSA Group has regional branch offices in major centres across Canada and inspection and testing agencies in eight countries. Since 1919, CSA Group has developed the necessary expertise to meet its corporate mission: CSA Group is an independent service organization whose mission is to provide an
27、 open and effective forum for activities facilitating the exchange of goods and services through the use of standards, certification and related services to meet national and international needs. For further information on CSA Group services, write to CSA Group 178 Rexdale Boulevard Toronto, Ontario
28、, M9W 1R3 CanadaA National Standard of Canada is a standard developed by an SCC- accredited Standards Development Organization (SDO), and approved by the Standards Council of Canada (SCC), in accordance with SCCs: Requirements and Guidance Accreditation for Standards Development Organizations, and R
29、equirements and Guidance Approval of National Standards of Canada Designation. More information on National Standard requirements can be found at www.scc.ca. An SCC-approved standard reflects the consensus of a number of experts whose collective interests provide, to the greatest practicable extent,
30、 a balance of representation of affected stakeholders. National Standards of Canada are intended to make a significant and timely contribution to the Canadian interest. SCC is a Crown corporation within the portfolio of Industry Canada. With the goal of enhancing Canadas economic competitiveness and
31、 social well-being, SCC leads and facilitates the development and use of national and international standards. SCC also coordinates Canadian participation in standards development, and identifies strategies to advance Canadian standardization efforts. Accreditation services are provided by SCC to va
32、rious customers, including product certifiers, testing laboratories, and standards development organizations. A list of SCC programs and accredited bodies is publicly available at www.scc.ca. Users should always obtain the latest edition of a National Standard of Canada from the standards developmen
33、t organization responsible for its publication, as these documents are subject to periodic review. Standards Council of Canada 600-55 Metcalfe Street Ottawa, Ontario, K1P 6L5 CanadaCette Norme Nationale du Canada est disponible en versions franaise et anglaise. Although the intended primary applicat
34、ion of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users to judge its suitability for their particular purpose. TMA trade-mark of the Canadian Standards Association, operating as “CSA Group”ICS 11.180.10 ISBN 978-1-4883-0103-2 2015 CSA Grou
35、p All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher.Published in December 2015 by CSA Group A not-for-profit private sector organization 178 Rexdale Boulevard, Toronto, Ontario, Canada M9W 1R3 To purchase standards
36、 and related publications, visit our Online Store at shop.csa.caor call toll-free 1-800-463-6727 or 416-747-4044.TMA trade-mar k of the Canadian S tandards Association,operating as “CSA Group”Reviewed byPrepared byInternational Organization for StandardizationApproved byHoists for the transfer of di
37、sabled persons Requirements and test methods (ISO 10535:2006, MOD)CAN/CSA-Z10535.1:15National Standard of CanadaCAN/CSA-Z10535.1:15 Hoists for the transfer of disabled persons Requirements and test methodsDecember 2015 2015 CSA GroupCSA/5CAN/CSA-Z10535.1:15Hoists for the transfer of disabled persons
38、 Requirements and test methods (ISO 10535:2006, MOD)CSA Preface This is the first edition of CAN/CSA-Z10535.1, Hoists for the transfer of disabled persons Requirements and test methods, which is an adoption, with Canadian deviations, of the identically titled ISO (International Organization for Stan
39、dardization) Standard 10535 (second edition, 2006-12-15). It replaces the previous edition, published in 2003 with the same title, but under the designation CAN/CSA-Z10535 (adopted ISO 10535:1998).For brevity, this Standard will be referred to as “CAN/CSA-Z10535.1” throughout.This Standard was revie
40、wed for Canadian adoption by the CSA Subcommittee on Patient Lifting Devices, under the jurisdiction of the CSA Technical Committee on Health Care Facilities and the CSA Strategic Steering Committee on Health Care Technology b) relevant clause, table, and/or figure number;c) wording of the proposed
41、change; andd) rationale for the change.CAN/CSA-Z10535.1:15 Hoists for the transfer of disabled persons Requirements and test methodsDecember 2015 2015 CSA GroupCSA/6Canadian deviationsThe following deviations are intended to align with local healthcare practices and to meet the requirements of Canad
42、ian healthcare regulators.1 ScopeReplace the last three paragraphs with the followingThis Standard applies to hoists and body-support units (assistive devices) used to transfer, typically by suspending from above, disabled persons between beds, chairs, stretchers, bathtubs, or other similar resting
43、places or standing positions. For example, this Standard applies to hoists and body-support units often referred to as ceiling lifts, portable lifts, floor lifts, sit-to-stand lifts, bathtub-chair lifts, and their slings and accessories, etc.This Standard does not apply to devices that transport per
44、sons between two levels (floors) of a building (e.g., elevators, escalators, stair lifts, etc.). Similarly, this Standard does not apply to beds, stretchers, powered lift chairs, wheeled-chairs, or other devices that can be used to transport people short distances between locations. However, this St
45、andard does apply to those portable hoists and body- support units that are also designed to transport people short distances between locations.It does not include methods for the determination of aging or corrosion of such hoists and units.The requirements of this Standard are formulated with regar
46、d to the needs of both the disabled persons being hoisted and the attendant using the hoist.2 Normative referencesAdd the followingWhere reference is made to CSA Group publications, such reference shall be considered to refer to the latest edition and all amendments published to that edition. This S
47、tandard refers to the following publications, and the years shown indicate the latest editions available at the time of printing:CSA GroupZ314.8-14 Decontamination of reusable medical devicesZ10535.2 (under development) Hoists for the transfer of disabled persons Installation, on-site testing, and m
48、aintenanceThe following National Standards of Canada, published by CSA Group, are adoptions of IEC Standards. The requirements of these CSA Group Standards shall take precedence over the International Standards on which they are based; any reference in CAN/CSA-Z10535.1 to the International Standard
49、shall be replaced by a reference to the equivalent Canadian Standard.CAN/CSA-C22.2 No. 60529:05 (R2015) Degrees of protection provided by enclosures (IP Code)CAN/CSA-Z10535.1:15 Hoists for the transfer of disabled persons Requirements and test methodsDecember 2015 2015 CSA GroupCSA/7CAN/CSA-C22.2 No. 60601-1:14 Medical electrical equipment Part 1: General requirements for basic safety and essential performanceCAN/CSA-C22.2 No. 60601-1-2:08 (R2014) Medical electrical equipment Part 1-2: General requirements for basic safety and e
