CECS 307-2012 Technical specification for strengthening cyclone special single stack drainage system《加强型旋流器特殊单立管排水系统技术规程》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GB T 5286-2001 螺栓、螺钉和螺母用平垫圈 总方案.pdf

GB T 5287-2002 特大垫圈 C级.pdf

GB T 5288-2007 龙门导轨磨床 精度检验.pdf

GB T 5289.1-2008 卧式铣镗床精度检验条件.第1部分 固定立柱和移动式工作台机床.pdf

GB T 5289.3-2006 卧式铣镗床检验条件.精度检验.第3部分 带分离式工件夹持固定工作台的落地式机床.pdf

GB T 5290.1-2001 电火花成形机 参数 第1部分;单立柱机床(十字工作台型和固定工作台型).pdf

GB T 5290.2-2003 电火花成形机 参数 第2部分;双立柱机床 (移动主轴头型和十字工作台型).pdf

GB T 5291.1-2001 电火花成形机 精度检验 第1部分;单立柱机床(十字工作台型和固定工作台型).pdf

GB T 5291.2-2003 电火花成形机 精度检验 第2部分 双立柱机床(移动主轴头型和十字工作台型).pdf